Partios Wholesale catalogue
Febi Bilstein Distributor | Parts
Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)
61,714 current catalogue lines
About the FEBI BILSTEIN range
The Febi Bilstein range at Partios is broad rather than specialised. It has 61,714 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 61,714 lines, is normally bought on fitment coverage rather than on any one part number.
Catalogue products
Vehicle references are indicative — confirm against the article number.
FEBI BILSTEIN Wheel suspension track control arm, front 48172
Front axle track control arm R bottom front (with a joint (knuckle)) fits: NISSAN NAVARA, NP300, PICK UP 2.4-3.2D 02.97-
View partFEBI BILSTEIN Wheel suspension track control arm, front 48175
Front axle track control arm L top front fits: NISSAN NAVARA, NP300, PICK UP 2.5D 05.98-
View partFEBI BILSTEIN Wheel suspension track control arm, front 48177
Front axle track control arm L top front 16/18,5 mm (with bearing) fits: NISSAN NAVARA, PICK UP 2.5D 02.98-
View partFEBI BILSTEIN Wheel suspension track control arm, front 48178
Front axle track control arm R top front 16/18,5 mm (with bearing) fits: NISSAN NAVARA, PICK UP 2.5D 02.98-
View partFEBI BILSTEIN Wheel suspension track control arm, front 48179
Front axle track control arm R top front 18,5 mm fits: NISSAN NAVARA, NP300, PICK UP 2.5D 05.98-
View partFEBI BILSTEIN Wheel suspension track control arm, front 48180
Front axle track control arm L bottom front 16 mm fits: NISSAN ALMERA, MICRA IV, NOTE, VERSA II 1.2-1.6ALK 05.10-
View partFEBI BILSTEIN Wheel suspension track control arm, front 48181
Front axle track control arm R bottom front 16 mm fits: NISSAN ALMERA, MICRA IV, NOTE, VERSA II 1.2-1.6ALK 05.10-
View partFEBI BILSTEIN Wheel suspension track control arm, rear 48183
Rear axle track control arm L (bottom, rear, transverse) fits: NISSAN QASHQAI +2, QASHQAI I, QASHQAI II, ROGUE, X-TRAIL, X-TRAIL II, X-TRAIL III RENAULT KADJAR 1.2-2.5 11.06-
View partFEBI BILSTEIN Wheel suspension track control arm, rear 48184
Rear axle track control arm R (bottom, rear, transverse) fits: NISSAN QASHQAI +2, QASHQAI I, QASHQAI II, ROGUE, X-TRAIL, X-TRAIL II, X-TRAIL III RENAULT KADJAR, KOLEOS II 1.2-2.5 11.06-
View partFEBI BILSTEIN Wheel suspension track control arm, rear 48185
Rear axle track control arm L (top, rear, longitudinal) fits: NISSAN QASHQAI +2, QASHQAI I, QASHQAI II, ROGUE, X-TRAIL, X-TRAIL II, X-TRAIL III RENAULT KADJAR, KOLEOS I, KOLEOS II 1.2-2.5 11.06-
View partFEBI BILSTEIN Wheel suspension track control arm, rear 48186
Rear axle track control arm R (top, rear, transverse) fits: NISSAN QASHQAI +2, QASHQAI I, QASHQAI II, ROGUE, X-TRAIL, X-TRAIL II, X-TRAIL III RENAULT KADJAR, KOLEOS I, KOLEOS II 1.2-2.5 11.06-
View partFEBI BILSTEIN Tie rod end 48193
Tie rod end (direction left-sided, M14x1,5mm/M22x1,5mm, L-100mm) fits: NISSAN ATLEON, CABSTAR E, TRADE 01.94-
View partFEBI BILSTEIN Tie rod end 48194
Tie rod end (direction right-sided, M14x1,5mm/M22x1,5mm, L-100mm) fits: NISSAN ATLEON, CABSTAR E, TRADE 01.94-
View partFEBI BILSTEIN Tie rod end 48200
Tie rod end L fits: NISSAN NAVARA NP300 RENAULT ALASKAN 2.3D-4.0 10.04-
View partFEBI BILSTEIN Tie rod end 48201
Tie rod end R fits: NISSAN NAVARA NP300 RENAULT ALASKAN 2.3D/2.5D/3.0D 07.05-
View partFEBI BILSTEIN Tie rod end 48202
Tie rod end L fits: NISSAN JUKE, LEAF, NV200 / EVALIA, TIIDA 1.2-Electric 06.10-
View partFEBI BILSTEIN Tie rod end 48203
Tie rod end L/R fits: NISSAN PRAIRIE PRO 2.0/2.4 10.88-07.94
View partFEBI BILSTEIN Tie rod end 48204
Tie rod end R fits: NISSAN JUKE, LEAF, NV200 / EVALIA, TIIDA 1.2-Electric 06.10-
View partFEBI BILSTEIN Cross rod 48205
Cross rod (L-673mm) fits: NISSAN CABSTAR, CABSTAR E 10.98-12.13
View partFEBI BILSTEIN Tie rod (with no end) 48208
Tie rod (with no end) L/R (length: 302mm) fits: SUBARU IMPREZA 1.6/2.0 12.00-06.09
View partFEBI BILSTEIN Tie rod (with no end) 48209
Tie rod (with no end) L/R (length: 325mm) fits: SUBARU CROSSTREK, FORESTER, IMPREZA, LEGACY VI, LEVORG, OUTBACK, TRIBECA, WRX, XV 1.6-3.6 01.05-
View partFEBI BILSTEIN Stabilizer link 48210
Stabilizer link front/rear L/R 140mm fits: LEXUS GS, LM, RC, RX TOYOTA ALPHARD / VELLFIRE, HIGHLANDER / KLUGER 2.0-5.0 12.08-
View partFEBI BILSTEIN Stabilizer link 48211
Stabilizer link rear L/R 140mm fits: LEXUS GS, LM, RC, RX TOYOTA ALPHARD / VELLFIRE 2.0-5.0 04.08-
View partFEBI BILSTEIN Stabilizer link 48212
Stabilizer link front L 136mm fits: LEXUS LX TOYOTA LAND CRUISER 200 4.5D-5.7 08.07-
View partFEBI BILSTEIN Stabilizer link 48213
Stabilizer link front R 136mm fits: LEXUS LX TOYOTA LAND CRUISER 200 4.5D-5.7 08.07-
View partFEBI BILSTEIN Stabilizer link 48214
Stabilizer link rear L/R 199mm fits: LEXUS GX TOYOTA LAND CRUISER, LAND CRUISER PRADO 2.8D-4.6 08.09-
View partFEBI BILSTEIN Stabilizer link 48215
Stabilizer link front L/R 260mm fits: LEXUS ES TOYOTA AVALON, CAMRY 2.0-3.5 01.06-06.18
View partFEBI BILSTEIN Stabilizer link repair kit 48216
Link stabilizer repair kit rear (10mm) fits: LEXUS LX TOYOTA LAND CRUISER 200 4.5D-5.7 08.07-
View partFEBI BILSTEIN Stabilizer link 48219
Stabilizer link front L 85mm fits: TOYOTA SEQUOIA, TUNDRA 4.0-5.7ALK 11.06-
View partFEBI BILSTEIN Stabilizer link 48220
Stabilizer link front R 85mm fits: TOYOTA SEQUOIA, TUNDRA 4.0-5.7ALK 11.06-
View partFEBI BILSTEIN Front ball joint 48222
Axle ball joint L/R (bottom front) (cone diameter 17,7mm) fits: LEXUS CT TOYOTA CELICA, COROLLA, COROLLA VERSO, PRIUS 1.3-2.0D 08.99-
View partFEBI BILSTEIN Front ball joint 48223
Axle ball joint L (bottom front) fits: LEXUS RX TOYOTA CAMRY, HIGHLANDER / KLUGER, SIENNA, VENZA 2.0-3.5H 01.06-
View partFEBI BILSTEIN Front ball joint 48224
Axle ball joint R (bottom front) fits: LEXUS RX TOYOTA HIGHLANDER / KLUGER, SIENNA, VENZA 2.0-3.5H 05.07-
View partFEBI BILSTEIN Front ball joint 48226
Axle ball joint L/R (bottom/outer front) fits: TOYOTA HIACE / COMMUTER V, HIACE IV, HIACE V 2.5D/2.7/3.0D 08.01-
View partFEBI BILSTEIN Tie rod end 48230
Tie rod end L/R fits: TOYOTA CARINA IV, COROLLA, MR2 I 1.3-2.0D 05.83-06.90
View partFEBI BILSTEIN Tie rod (with no end) 48235
Tie rod (with no end) L/R (length: 248mm) fits: TOYOTA CAMRY 2.4/2.4H/3.5 01.06-12.14
View partFEBI BILSTEIN Tie rod (with no end) 48236
Tie rod (with no end) L/R (length: 297mm) fits: TOYOTA RAV 4 II 1.8-2.4 05.00-11.05
View partFEBI BILSTEIN Tie rod end 48237
Tie rod end L fits: LEXUS LX TOYOTA LAND CRUISER 100 4.2D/4.7 01.98-03.08
View partFEBI BILSTEIN Tie rod end 48238
Tie rod end R fits: LEXUS LX TOYOTA LAND CRUISER 100 4.2D/4.7 01.98-03.08
View partFEBI BILSTEIN Tie rod (with no end) 48239
Tie rod (with no end) L/R (length: 365,5mm) fits: TOYOTA PRIUS 1.5H 09.00-12.03
View partFEBI BILSTEIN Tie rod (with no end) 48240
Tie rod (with no end) L/R (length: 117mm, with counter-nut) fits: TOYOTA IQ 1.0/1.33/1.4D 01.09-12.15
View partFEBI BILSTEIN Steering knuckle repair kit 48241
King pin set rear fits: TOYOTA DYNA 150 2.8D/3.0D 08.88-07.01
View partFEBI BILSTEIN Steering knuckle repair kit 48242
King pin set fits: TOYOTA DYNA 150, DYNA 200 3.0D/3.4D/4.1D 09.88-07.01
View partFEBI BILSTEIN Tie rod end 48243
Tie rod end L fits: TOYOTA SEQUOIA, TUNDRA 4.0-5.7ALK 09.06-
View partFEBI BILSTEIN Tie rod end 48244
Tie rod end R fits: TOYOTA SEQUOIA, TUNDRA 4.0-5.7ALK 09.06-
View partFEBI BILSTEIN Tie rod end 48245
Tie rod end L/R fits: TOYOTA HIACE / COMMUTER V, HIACE IV, HIACE V 2.4-3.0D 08.89-
View partFEBI BILSTEIN Steering knuckle repair kit 48247
King pin set fits: ISUZU N SERIES
View partFEBI BILSTEIN Steering knuckle repair kit 48248
King pin set front (length 187,5mm) fits: ISUZU N V 3.0-5.2D 09.98-
View partBuying with Partios
Buying FEBI BILSTEIN parts through Partios
Are these genuine FEBI BILSTEIN parts?
- Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source FEBI BILSTEIN parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.
Do you supply FEBI BILSTEIN parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on FEBI BILSTEIN parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a FEBI BILSTEIN order?
- It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for FEBI BILSTEIN parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account