Partios Wholesale catalogue

Febi Bilstein Distributor | Parts

Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)

59,553 current catalogue lines

About the FEBI BILSTEIN range

The Febi Bilstein range at Partios is broad rather than specialised. It has 59,553 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 59,553 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

FEBI BILSTEIN Timing belt 47885

Timing belt fits: AUDI A1, A1 ALLSTREET, A1 CITY CARVER, A3, A4 B9, A5, Q2, Q3 CUPRA FORMENTOR, LEON, LEON SPORTSTOURER, TERRAMAR FORD TOURNEO CONNECT V761 1.0-1.6 03.11-

View part

FEBI BILSTEIN Timing belt tension roll/pulley 47886

Timing belt tension roll/pulley fits: ALFA ROMEO 159, 4C, 4C SPIDER, BRERA, GIULIETTA, SPIDER LANCIA DELTA III 1.8 01.09-12.20

View part

FEBI BILSTEIN Fuel filter mounting 47887

Fuel filter mounting M8x1,5 (bolt class 10.9) fits: DAF

View part

FEBI BILSTEIN Fuel filter mounting 47887 2SET

Fuel filter mounting M8x1,5 (2 pcs)

View part

FEBI BILSTEIN Air flowmeter 47888

Air flowmeter (4 pin, module) fits: ALFA ROMEO 159, BRERA, GIULIETTA, MITO, SPIDER CITROEN NEMO FIAT 500, 500 C, 500L, 500X, BRAVO, BRAVO II, DOBLO, DOBLO CARGO, DUCATO, FIORINO 1.2-2.3D 01.04-

View part

FEBI BILSTEIN EGR valve flange bolt 47891

EGR valve flange bolt (M10x1,5) fits: DAF CF 75, CF 85 TATRA PHOENIX, T148, T815 01.72-

View part

FEBI BILSTEIN Expansion tank 47892

Coolant expansion tank fits: OPEL ZAFIRA C 10.11-03.19

View part

FEBI BILSTEIN Expansion tank 47893

Coolant expansion tank (with level sensor) fits: OPEL SIGNUM, VECTRA C, VECTRA C GTS SAAB 9-3, 9-3X 04.02-02.15

View part

FEBI BILSTEIN Sump drain hole bolt 47894

Oil sump drain bolt M24x1,5 fits: BMW 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23), 3 (F30, F80), 3 (F31), 3 GRAN TURISMO (F34), 4 (F32, F82), 4 (F33, F83), 4 GRAN COUPE (F36) 1.6/2.0/4.4H 10.10-

View part

FEBI BILSTEIN Steering gear hose 47895

Steering gear hose/pipe fits: SEAT LEON, TOLEDO II SKODA OCTAVIA I VW BORA, BORA I, GOLF IV 1.8/1.9D 09.96-03.10

View part

FEBI BILSTEIN Steering gear hose 47896

Steering gear hose/pipe fits: AUDI A3 SEAT LEON, TOLEDO II SKODA OCTAVIA I VW BORA, BORA I, GOLF IV 1.6/1.9D 09.96-12.10

View part

FEBI BILSTEIN Expansion tank 47897

Coolant expansion tank fits: OPEL ZAFIRA C 10.11-03.19

View part

FEBI BILSTEIN Expansion tank 47898

Coolant expansion tank fits: OPEL ASTRA G CLASSIC, ASTRA H, ASTRA H CLASSIC, ASTRA H GTC 01.04-10.14

View part

FEBI BILSTEIN Crankshaft oil seal 47899

Crankshaft oil seal housing of a gearbox (85) fits: AUDI A2 SEAT AROSA, CORDOBA, CORDOBA VARIO, IBIZA II, IBIZA III, LEON, TOLEDO II SKODA FABIA I, OCTAVIA I VW BORA, BORA I 1.4/1.6 09.96-04.12

View part

FEBI BILSTEIN Expansion tank 47900

Coolant expansion tank fits: OPEL INSIGNIA A, INSIGNIA A COUNTRY 07.08-03.17

View part

FEBI BILSTEIN Expansion tank 47902

Coolant expansion tank (with level sensor) fits: OPEL ASTRA H, ASTRA H CLASSIC, ASTRA J, ASTRA J GTC, CASCADA 11.05-04.19

View part

FEBI BILSTEIN Expansion tank 47903

Coolant expansion tank fits: OPEL CORSA D 07.06-08.14

View part

FEBI BILSTEIN Upholstery pin 47904

Upholstery pin (quantity per packaging: 10 pcs) fits: MERCEDES 124 (W124), 124 T-MODEL (S124), 190 (W201), E (W124), E T-MODEL (S124) 10.82-06.96

View part

FEBI BILSTEIN Expansion tank 47905

Coolant expansion tank fits: OPEL CORSA C, CORSA D 07.05-08.14

View part

FEBI BILSTEIN Upholstery pin 47906

Upholstery pin (quantity per packaging: 25 pcs) fits: MERCEDES 123 (C123), 123 (W123), C (CL203), CLC (CL203), CLS (C218), E (W212), G (W461), GLE (W166), M (W166) 07.75-

View part

FEBI BILSTEIN Expansion tank 47907

Coolant expansion tank fits: OPEL ADAM, CORSA E 10.12-

View part

FEBI BILSTEIN Front track control arm silent block 47908

Front track control arm silent block in the back R (18,9x41x50/107 mm) fits: ALFA ROMEO 147, 156, GT 1.6-3.2 02.97-09.10

View part

FEBI BILSTEIN Front track control arm silent block 47909

Front track control arm silent block in the back L (18,9x41x50/107 mm) fits: ALFA ROMEO 147, 156, GT 1.6-3.2 02.97-09.10

View part

FEBI BILSTEIN Gas spring 47910

Gas spring trunk lid L/R max length: 600mm, stroke:240mm fits: CITROEN ZX FURGON/HATCHBACK/LIFTBACK 03.91-10.97

View part

FEBI BILSTEIN Gas spring 47911

Gas spring trunk lid L/R max length: 565mm, stroke:230mm fits: PEUGEOT 309 II LIFTBACK 07.89-12.93

View part

FEBI BILSTEIN Gas spring 47912

Gas spring trunk lid L/R max length: 497mm, stroke:180mm fits: RENAULT LAGUNA III LIFTBACK 10.07-12.15

View part

FEBI BILSTEIN Gas spring 47913

Gas spring trunk lid L/R max length: 287mm, stroke:90mm fits: SEAT CORDOBA SEDAN 09.02-11.09

View part

FEBI BILSTEIN Gas spring 47914

Gas spring trunk lid L max length: 653mm, stroke:275mm fits: PORSCHE 924, 944 COUPE 11.75-08.89

View part

FEBI BILSTEIN Gas spring 47915

Gas spring trunk lid R max length: 653mm, stroke:259mm fits: PORSCHE 924, 944 COUPE 11.75-08.89

View part

FEBI BILSTEIN MacPherson strut mount 47916

MacPherson strut mount front R fits: CITROEN JUMPY II FIAT SCUDO PEUGEOT EXPERT, EXPERT TEPEE TOYOTA PROACE 1.6D/2.0/2.0D 11.06-

View part

FEBI BILSTEIN MacPherson strut mount 47917

MacPherson strut mount front L fits: CITROEN JUMPY II FIAT SCUDO PEUGEOT EXPERT, EXPERT TEPEE TOYOTA PROACE 1.6D/2.0/2.0D 01.07-

View part

FEBI BILSTEIN Stabilizer link 47918

Stabilizer link rear L/R 145mm fits: AUDI A6 C6 2.0-5.2 05.04-08.11

View part

FEBI BILSTEIN Wheel suspension track control arm, front 47920

Front axle track control arm L bottom front fits: MERCEDES C (C204), C (W204), C T-MODEL (S204), E (C207) 1.6-6.3 01.07-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 47921

Front axle track control arm R bottom front fits: MERCEDES C (C204), C (W204), C T-MODEL (S204), E (C207) 2.2D-3.5 07.07-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 47922

Front axle track control arm L bottom front fits: MERCEDES CLS (C218), CLS SHOOTING BRAKE (X218), E (W212), E T-MODEL (S212) 1.6-6.2 01.09-12.17

View part

FEBI BILSTEIN Wheel suspension track control arm, front 47923

Front axle track control arm R bottom front fits: MERCEDES CLS (C218), CLS SHOOTING BRAKE (X218), E (W212), E T-MODEL (S212) 1.6-6.2 01.09-12.17

View part

FEBI BILSTEIN Stabilizer link 47924

Stabilizer link rear L/R 145mm (with bolts) fits: AUDI A6 C6 2.0-5.2 05.04-08.11

View part

FEBI BILSTEIN Upholstery pin 47925

Upholstery pin (quantity per packaging: 50 pcs) fits: FORD MERCEDES

View part

FEBI BILSTEIN Valve cover gasket 47926

Rocker cover gasket fits: MERCEDES C (CL203), C (W203), C (W204), C T-MODEL (S203), C T-MODEL (S204), CLC (CL203), CLK (A209), CLK (C209), E (W211), E (W212) 1.6-1.8LPG 05.02-12.18

View part

FEBI BILSTEIN Rocker cover gasket set 47927

Rocker cover gasket set fits: MERCEDES C (CL203), C (W203), C (W204), C T-MODEL (S203), C T-MODEL (S204), CLC (CL203), CLK (A209), CLK (C209), E (C207), E (W211), E (W212) 1.6-1.8LPG 05.02-12.18

View part

FEBI BILSTEIN Cooling system thermostat 47929

Cooling system thermostat (80°C, in housing) fits: FIAT PALIO, PUNTO, SIENA, STRADA 1.7D 01.94-

View part

FEBI BILSTEIN Track control arm fitting elements 47930

Suspension mounting elements L/R MERCEDES GL (X166), GLE (C292), GLE (W166), GLS (X166), M (W166) 2.2D-5.5 06.11-10.19

View part

FEBI BILSTEIN Tie rod (with end) 47931

Tie rod (with end) L (dł.432mm) fits: VOLVO S60 II, S80 II, V60 I, V70 III, XC70 II 1.5-4.4 03.06-12.18

View part

FEBI BILSTEIN Tie rod (with end) 47932

Tie rod (with end) R (dł.432mm) fits: VOLVO S60 II, S80 II, V60 I, V70 III, XC70 II 1.5-4.4 03.06-12.18

View part

FEBI BILSTEIN Spring cushion damper 47933

Suspension spring fender rear fits: SCANIA 4, G I, P I, R I, T 05.95-09.22

View part

FEBI BILSTEIN Tie rod (with end) 47934

Tie rod (with end) R (dł.432mm) fits: VOLVO S60 II, S80 II, V60 I, V70 III 1.5-4.4 03.06-12.18

View part

FEBI BILSTEIN Tie rod (with end) 47935

Tie rod (with end) L (dł.432mm) fits: VOLVO S60 II, S80 II, V60 I, V70 III 1.5-4.4 03.06-12.18

View part

FEBI BILSTEIN Upholstery pin 47936

Upholstery pin (quantity per packaging: 25 pcs) fits: MERCEDES M (W166), S (W221, V221) 10.05-12.15

View part

Buying with Partios

Buying FEBI BILSTEIN parts through Partios

Are these genuine FEBI BILSTEIN parts?

Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FEBI BILSTEIN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.

Do you supply FEBI BILSTEIN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FEBI BILSTEIN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FEBI BILSTEIN order?

It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FEBI BILSTEIN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account