Partios Wholesale catalogue

Febi Bilstein Distributor | Parts

Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)

59,491 current catalogue lines

About the FEBI BILSTEIN range

The Febi Bilstein range at Partios is broad rather than specialised. It has 59,491 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 59,491 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

FEBI BILSTEIN Front ball joint 41817

Axle ball joint R (bottom front) fits: SSANGYONG RODIUS I 2.7D/3.2 05.05-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41820

Front axle track control arm L bottom front 18 mm fits: CHEVROLET LACETTI 1.4-2.0D 03.05-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41821

Front axle track control arm R bottom front 18 mm fits: CHEVROLET LACETTI 2.0D 01.07-

View part

FEBI BILSTEIN Front ball joint 41823

Axle ball joint L/R (bottom front) (cone diameter 18mm, with bolts with pads) fits: CHEVROLET EPICA DAEWOO EVANDA 2.0/2.0D/2.5 08.02-

View part

FEBI BILSTEIN Wheel suspension track control arm, rear 41824

Rear axle track control arm L/R (bottom, rear, transverse) fits: HYUNDAI ACCENT II 1.5 01.00-11.05

View part

FEBI BILSTEIN Wheel suspension track control arm, rear 41825

Rear axle track control arm R (bottom, front, transverse) fits: HYUNDAI ACCENT II 1.3-1.6 01.00-11.05

View part

FEBI BILSTEIN Front ball joint 41827

Axle ball joint L/R (top front) (cone diameter 17,6mm) fits: DAEWOO KORANDO, MUSSO SSANGYONG KORANDO, MUSSO, MUSSO SPORTS 2.0-3.2 12.88-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41830

Front axle track control arm R front fits: KIA SEPHIA 1.6 09.93-10.97

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41831

Front axle track control arm L bottom front fits: KIA BONGO, K2700 2.7D 10.99-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41832

Front axle track control arm R bottom front fits: KIA BONGO, K2700 2.7D 10.99-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41835

Front axle track control arm L bottom front 15/17 mm fits: HYUNDAI GETZ KIA SEPHIA, SHUMA, SHUMA I 1.1-1.6 09.93-12.10

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41836

Front axle track control arm R bottom front 15/17 mm fits: HYUNDAI GETZ KIA SEPHIA, SHUMA, SHUMA I 1.1-1.6 09.93-12.10

View part

FEBI BILSTEIN Wheel suspension track control arm, rear 41837

Rear axle track control arm L (bottom, rear, transverse) fits: HYUNDAI ACCENT II 1.3-1.6 09.99-12.06

View part

FEBI BILSTEIN Wheel suspension track control arm, rear 41838

Rear axle track control arm R (bottom, rear, transverse) fits: HYUNDAI ACCENT II 1.3-1.6 09.99-12.06

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41839

Front axle track control arm L bottom front fits: HYUNDAI COUPE II, ELANTRA III, MATRIX, TIBURON 1.5D-2.7 06.00-08.10

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41840

Front axle track control arm R top/transverse front (with bearing) fits: HYUNDAI COUPE II, ELANTRA III, MATRIX, TIBURON 1.5D-2.7 06.00-08.10

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41841

Front axle track control arm L bottom front fits: HYUNDAI H-1 2.5D 10.01-08.07

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41843

Front axle track control arm L bottom front fits: KIA BONGO, K2500, K2900 2.5D/2.9D 10.03-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41844

Front axle track control arm R bottom front fits: KIA BONGO, K2500, K2900 2.5D/2.9D 10.03-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41846

Front axle track control arm L bottom front fits: KIA PICANTO I 1.0-1.1LPG 04.04-09.11

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41847

Front axle track control arm R bottom front fits: KIA PICANTO I 1.0-1.1LPG 04.04-09.11

View part

FEBI BILSTEIN Front ball joint 41852

Axle ball joint L/R (bottom front) (cone diameter 18mm, with extra materials) fits: HYUNDAI IX35, SONATA VI KIA SPORTAGE III 1.6-Electric 06.09-12.16

View part

FEBI BILSTEIN Front ball joint 41853

Axle ball joint L/R (bottom front) (cone diameter 18mm, With spring setting ring) fits: HYUNDAI I10 I, I10 II, I10 III, I20 ACTIVE KIA PICANTO II, PICANTO III, RIO II, RIO III 1.0-1.6LPG 03.05-

View part

FEBI BILSTEIN Front ball joint 41854

Axle ball joint L/R (bottom front) (cone diameter 19,5mm) fits: HYUNDAI H-1, H-1 / STAREX, H-1 TRAVEL 2.4/2.5D/2.6D 06.97-

View part

FEBI BILSTEIN Front ball joint 41856

Axle ball joint L/R (bottom front) (cone diameter 14,8 18mm, with extra materials) fits: VOLVO V50 CHEVROLET LACETTI, NUBIRA DAEWOO LACETTI, NUBIRA FORD FOCUS II 1.4-2.4D 05.03-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41857

Front axle track control arm R bottom front 22 mm fits: KIA CARNIVAL I, CARNIVAL II 2.5/2.9D 08.99-06.06

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41858

Front axle track control arm L bottom front 22 mm fits: KIA CARNIVAL I, CARNIVAL II 2.5/2.9D 08.99-06.06

View part

FEBI BILSTEIN Front ball joint 41859

Axle ball joint L/R (top front) fits: HYUNDAI TERRACAN 2.5D/2.9D/3.5 11.01-12.06

View part

FEBI BILSTEIN Front ball joint 41860

Axle ball joint L/R (bottom front) (cone diameter 19,4mm) fits: HYUNDAI TERRACAN 2.5D/2.9D/3.5 11.01-12.06

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41861

Front axle track control arm R bottom/transverse front 17 mm fits: HYUNDAI COUPE II, ELANTRA III, MATRIX, TIBURON 1.5D-2.7 06.00-08.10

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41862

Front axle track control arm L bottom/transverse front fits: HYUNDAI COUPE II, ELANTRA III, MATRIX, TIBURON 1.5D-2.7 06.00-08.10

View part

FEBI BILSTEIN Front ball joint 41863

Axle ball joint L/R (top front) (cone diameter 16,5mm, With spring setting ring) fits: HYUNDAI GALLOPER II MITSUBISHI PAJERO III, PAJERO PININ I 1.8-3.2D 08.98-12.06

View part

FEBI BILSTEIN Front ball joint 41866

Axle ball joint L/R (top front) (cone diameter 17,1mm, With spring setting ring) fits: VOLVO V40 HYUNDAI ACCENT III, COUPE II, ELANTRA III, ELANTRA IV, GETZ, I20 ACTIVE, I20 I 1.1-3.0 07.95-09.21

View part

FEBI BILSTEIN Front ball joint 41867

Axle ball joint L/R (bottom front) (cone diameter 19,5mm) fits: HYUNDAI GALLOPER II 2.5D/3.0 08.98-12.03

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41868

Front axle track control arm L top front 16 mm fits: HYUNDAI GALLOPER II 2.5D/3.0 11.97-12.03

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41869

Front axle track control arm R top front 16,4 mm fits: HYUNDAI GALLOPER II 2.5D/2.6D/3.0 11.97-12.03

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41870

Front axle track control arm R top front 17/20 mm fits: HYUNDAI H-1, H-1 / STAREX, H-1 TRAVEL 2.4/2.5D/2.6D 06.97-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41871

Front axle track control arm L top front fits: HYUNDAI H-1, H-1 / STAREX, H-1 TRAVEL 2.4/2.5D/2.6D 06.97-

View part

FEBI BILSTEIN Front ball joint 41873

Axle ball joint L/R (bottom front) (cone diameter 22mm) fits: HYUNDAI H-1, H-1 / STAREX 2.4/2.5D/2.6D 06.97-12.07

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41874

Front axle track control arm L bottom front 16 mm fits: CHEVROLET REZZO DAEWOO TACUMA / REZZO 1.6/1.8/2.0 09.00-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41875

Front axle track control arm R front 16 mm fits: CHEVROLET REZZO DAEWOO TACUMA / REZZO 1.6/1.8/2.0 09.00-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41876

Front axle track control arm R bottom front 16 mm fits: KIA RIO I 1.3/1.5 08.00-02.05

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41877

Front axle track control arm L bottom front 16 mm fits: KIA RIO I 1.3/1.5 08.00-02.05

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41878

Front axle track control arm L bottom front fits: KIA RIO I 1.3/1.5 08.00-02.05

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41879

Front axle track control arm R bottom front fits: KIA RIO I 1.3/1.5 08.00-02.05

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41880

Front axle track control arm R top front 14,3/16 mm fits: HYUNDAI SONATA III, SONATA IV, XG KIA MAGENTIS I, OPIRUS 2.0-3.5 06.94-12.06

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41881

Front axle track control arm L top front 13,4/16,5 mm fits: HYUNDAI SONATA III, SONATA IV, XG KIA MAGENTIS I, OPIRUS 2.0-3.5 06.94-12.06

View part

FEBI BILSTEIN Front ball joint 41883

Axle ball joint L/R (bottom front) (with bolts with pads) fits: KIA CARENS I, PICANTO I 1.1D-2.0D 11.00-04.11

View part

Buying with Partios

Buying FEBI BILSTEIN parts through Partios

Are these genuine FEBI BILSTEIN parts?

Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FEBI BILSTEIN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.

Do you supply FEBI BILSTEIN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FEBI BILSTEIN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FEBI BILSTEIN order?

It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FEBI BILSTEIN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account