Partios Wholesale catalogue

Febi Bilstein Distributor | Parts

Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)

59,491 current catalogue lines

About the FEBI BILSTEIN range

The Febi Bilstein range at Partios is broad rather than specialised. It has 59,491 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 59,491 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

FEBI BILSTEIN Stabilizer link 41208

Stabilizer link front L/R 150mm fits: FUSO (MITSUBISHI) CANTER VII (FB7_, FE7_, FB8_, FE8_) MITSUBISHI CANTER VI (FE5, FE6, FB5, FB6) 3.0D/3.9D 08.01-

View part

FEBI BILSTEIN Stabilizer link 41209

Stabilizer link front L/R 129mm

View part

FEBI BILSTEIN Front ball joint 41210

Axle ball joint L/R (bottom front) (cone diameter 17mm, With spring setting ring) fits: VOLVO S40 I, V40 HYUNDAI I20 ACTIVE, I20 I, I20 II MITSUBISHI COLT III, COLT IV 1.1D-2.4 06.84-09.21

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41212

Front axle track control arm R bottom front fits: MITSUBISHI COLT V, LANCER VI 1.3/1.6 12.95-09.03

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41213

Front axle track control arm R bottom front (with a joint (knuckle) with bearing) fits: MITSUBISHI ECLIPSE II, GALANT VIII 2.0-2.5 12.95-10.04

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41214

Front axle track control arm L bottom front fits: MITSUBISHI ECLIPSE II, GALANT VIII 2.0-2.5 12.95-10.04

View part

FEBI BILSTEIN Wheel suspension track control arm, rear 41215

Rear axle track control arm L/R (bottom, rear, transverse) fits: MITSUBISHI ASX, LANCER VIII, OUTLANDER II 1.5-2.4ALK 11.06-

View part

FEBI BILSTEIN Wheel suspension track control arm, rear 41216

Rear axle track control arm L/R (bottom, rear, transverse) fits: MITSUBISHI LANCER CARGO, LANCER VII, OUTLANDER I 1.3-2.4 03.01-12.13

View part

FEBI BILSTEIN Wheel suspension track control arm, rear 41217

Rear axle track control arm L (bottom, rear, transverse) fits: CITROEN C-CROSSER, C-CROSSER ENTERPRISE MITSUBISHI OUTLANDER II PEUGEOT 4007 2.0D-2.4ALK 11.06-

View part

FEBI BILSTEIN Wheel suspension track control arm, rear 41218

Rear axle track control arm R (bottom, rear, transverse) fits: CITROEN C-CROSSER, C-CROSSER ENTERPRISE MITSUBISHI OUTLANDER II PEUGEOT 4007 2.0D-2.4ALK 11.06-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41219

Front axle track control arm L bottom/transverse front (with bearing) fits: MITSUBISHI OUTLANDER I 2.0/2.4 01.02-09.07

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41220

Front axle track control arm R bottom/transverse front (with bearing) fits: MITSUBISHI OUTLANDER I 2.0/2.4 01.02-09.07

View part

FEBI BILSTEIN Front ball joint 41222

Axle ball joint L/R (top front) (With spring setting ring) fits: MITSUBISHI L200 2.0/2.5D 11.86-10.96

View part

FEBI BILSTEIN Front ball joint 41223

Axle ball joint L/R (top front) (cone diameter 17,7mm) fits: HYUNDAI GRACE, H-1, H-1 / STAREX, H100, PORTER MITSUBISHI DELICA / SPACE GEAR, L 300 III, L400 1.6-2.8D 11.86-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41226

Front axle track control arm L bottom front 15 mm fits: MITSUBISHI ECLIPSE II, GALANT VII, GALANT VIII 1.8-2.5 11.92-10.04

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41227

Front axle track control arm R bottom front 15/18 mm (with bearing) fits: MITSUBISHI ECLIPSE II, GALANT VII, GALANT VIII 1.8-2.5 11.92-10.04

View part

FEBI BILSTEIN Front ball joint 41230

Axle ball joint L/R (top front) (With spring setting ring) fits: AUDI A4 B5 MITSUBISHI ECLIPSE II, GALANT VII VW PASSAT B5, PASSAT B5.5 1.6-2.5 11.92-05.05

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41231

Front axle track control arm L bottom front fits: MITSUBISHI COLT IV, LANCER V 1.3-2.0D 04.92-10.03

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41232

Front axle track control arm R bottom/transverse front (with a joint (knuckle) with bearing) fits: MITSUBISHI COLT IV, LANCER V 1.3-2.0D 04.92-10.03

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41233

Front axle track control arm L top front 13,5 mm fits: MITSUBISHI ECLIPSE II, GALANT VII, GALANT VIII 1.8-2.5 11.92-10.04

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41234

Front axle track control arm R top front 13,5 mm fits: MITSUBISHI ECLIPSE II, GALANT VII, GALANT VIII 1.8-2.5 11.92-10.04

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41235

Front axle track control arm L bottom front fits: MITSUBISHI ECLIPSE II, GALANT VII, GALANT VIII 1.8-2.5 11.92-10.04

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41236

Front axle track control arm R bottom front 15 mm fits: MITSUBISHI ECLIPSE II, GALANT VII, GALANT VIII 1.8-2.5 11.92-10.04

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41237

Front axle track control arm L bottom front fits: MITSUBISHI COLT V, LANCER VI 1.3/1.6 12.95-09.03

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41238

Front axle track control arm R bottom front fits: MITSUBISHI COLT V, LANCER VI 1.3/1.6 12.95-08.03

View part

FEBI BILSTEIN Front ball joint 41239

Axle ball joint L (bottom front) (cone diameter 19,4mm) fits: MITSUBISHI L 300 III, L400 2.5D 11.86-02.06

View part

FEBI BILSTEIN Front ball joint 41240

Axle ball joint R (bottom front) (cone diameter 19,4mm) fits: MITSUBISHI L 300 III, L400 2.5D 11.86-02.06

View part

FEBI BILSTEIN Front ball joint 41241

Axle ball joint L/R (bottom front) (cone diameter 22mm) fits: MITSUBISHI DELICA / SPACE GEAR, L 300 III, L400 2.0/2.5D 11.94-06.05

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41242

Front axle track control arm R top front fits: MITSUBISHI L200, PAJERO II, PAJERO SPORT I, PROUDIA/DIGNITY NISSAN PRIMERA 2.0-4.5 12.90-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41243

Front axle track control arm L bottom front 18 mm fits: MITSUBISHI CARISMA, SPACE STAR 1.3-2.0 05.95-06.06

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41244

Front axle track control arm R bottom front 18 mm fits: MITSUBISHI CARISMA, SPACE STAR 1.3-1.9D 05.95-06.06

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41245

Front axle track control arm L bottom front fits: MITSUBISHI PAJERO PININ I 1.8/2.0 10.99-06.07

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41246

Front axle track control arm R bottom front fits: MITSUBISHI PAJERO PININ I 1.8/2.0 10.99-06.07

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41248

Front axle track control arm L bottom front 15 mm fits: MITSUBISHI PAJERO PININ I 1.8/2.0 10.99-06.07

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41249

Front axle track control arm R bottom front fits: MITSUBISHI PAJERO PININ I 1.8/2.0 10.99-06.07

View part

FEBI BILSTEIN Front ball joint 41250

Axle ball joint L/R (top front) (cone diameter 16mm, with bolts) fits: MITSUBISHI L200, L200 / TRITON, PAJERO CLASSIC, PAJERO II, PAJERO III, PAJERO IV, PAJERO SPORT II 2.5D-3.8 04.00-

View part

FEBI BILSTEIN Front ball joint 41251

Axle ball joint L/R (bottom front) (cone diameter 21,5mm) fits: FIAT FULLBACK MITSUBISHI L200, L200 / TRITON, PAJERO CLASSIC, PAJERO II, PAJERO III, PAJERO IV, PAJERO PININ I 1.8-3.8 10.99-

View part

FEBI BILSTEIN Ball joint, rear 41252

Ball joint, rear L/R (top rear) (22,5mm) fits: MITSUBISHI PAJERO CLASSIC, PAJERO II, PAJERO III, PAJERO IV 2.5D-3.5 04.00-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41253

Front axle track control arm R top front 18 mm (with a joint (knuckle) with bearing) fits: MITSUBISHI PAJERO CLASSIC, PAJERO II, PAJERO III, PAJERO IV 2.5D-3.8 04.00-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41254

Front axle track control arm L top front 18 mm (with a joint (knuckle) with bearing) fits: MITSUBISHI PAJERO CLASSIC, PAJERO II, PAJERO III, PAJERO IV 2.5D-3.8 04.00-

View part

FEBI BILSTEIN Front ball joint 41258

Axle ball joint L/R (bottom front) (With spring setting ring) fits: CITROEN C-CROSSER, C-CROSSER ENTERPRISE, C4 AIRCROSS MITSUBISHI ASX, LANCER CARGO, LANCER VII, LANCER VIII 1.3-3.0 09.03-

View part

FEBI BILSTEIN Wheel suspension track control arm, rear 41262

Rear axle track control arm L/R (rear, transverse) fits: MITSUBISHI PAJERO CLASSIC, PAJERO II, PAJERO III, PAJERO IV 2.5D-3.8 04.00-

View part

FEBI BILSTEIN Ball joint, rear 41265

Ball joint, rear L/R (top rear) fits: MITSUBISHI PAJERO II, PAJERO III, PAJERO IV 2.5D-3.8 04.00-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41266

Front axle track control arm R bottom/transverse front (with bearing) fits: MITSUBISHI OUTLANDER I 2.0/2.4 03.01-09.07

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41267

Front axle track control arm L bottom/transverse front (with bearing) fits: MITSUBISHI OUTLANDER I 2.0/2.4 03.01-09.07

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41271

Front axle track control arm L top front fits: MITSUBISHI L200, PAJERO II, PAJERO SPORT I, PROUDIA/DIGNITY NISSAN PRIMERA 2.0-4.5 12.90-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41272

Front axle track control arm L bottom front fits: MITSUBISHI SPACE, SPACE RUNNER 1.8/2.0/2.0D 05.91-08.99

View part

FEBI BILSTEIN Wheel suspension track control arm, front 41273

Front axle track control arm R bottom front fits: MITSUBISHI SPACE, SPACE RUNNER 1.8/2.0/2.0D 05.91-08.99

View part

Buying with Partios

Buying FEBI BILSTEIN parts through Partios

Are these genuine FEBI BILSTEIN parts?

Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FEBI BILSTEIN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.

Do you supply FEBI BILSTEIN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FEBI BILSTEIN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FEBI BILSTEIN order?

It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FEBI BILSTEIN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account