Partios Wholesale catalogue

Febi Bilstein Distributor | Parts

Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)

59,502 current catalogue lines

About the FEBI BILSTEIN range

The Febi Bilstein range at Partios is broad rather than specialised. It has 59,502 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 59,502 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

FEBI BILSTEIN MacPherson strut mount 38064

MacPherson strut mount front L/R (with a bearing, with nuts) fits: FIAT CINQUECENTO, SEICENTO / 600 0.7/0.9/1.1 07.91-01.10

View part

FEBI BILSTEIN MacPherson strut mount 38065

MacPherson strut mount front L/R (with a bearing) fits: FIAT BARCHETTA, PUNTO LANCIA Y 1.1-1.8 09.93-05.05

View part

FEBI BILSTEIN MacPherson strut mount 38067

MacPherson strut mount front L/R (with nuts) fits: FIAT BRAVO, BRAVO II, STILO LANCIA DELTA III 1.2-2.4 10.01-12.16

View part

FEBI BILSTEIN Steering rod fitting elements 38069

Nakrętka drążka kierowniczego poprzecznego MERCEDES M16 x 1,5 x 8 mm

View part

FEBI BILSTEIN Engine mount 38070

Engine mount front R, hydraulic fits: OPEL ASTRA J, ASTRA J GTC, CASCADA, ZAFIRA C 2.0D 09.09-11.18

View part

FEBI BILSTEIN Stabilizer link 38071

Stabilizer link front L 340mm fits: BMW 3 (E90), 3 (E91), 3 (E92), X1 (E84) 2.0-3.0D 12.04-06.15

View part

FEBI BILSTEIN Stabilizer link 38072

Stabilizer link front R 340mm fits: BMW 3 (E90), 3 (E91), 3 (E92), X1 (E84) 2.0-3.0D 12.04-06.15

View part

FEBI BILSTEIN Tie rod (with no end) 38073

Tie rod (with no end) L/R (length: 306mm) fits: SEAT MII SKODA CITIGO, E-CITIGO VW LOAD UP!, UP! 1.0/1.0CNG/Electric 08.11-

View part

FEBI BILSTEIN Stabilizer bar bushing 38074

Stabilizer bar bushing rear L/R (11mm) fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93) 1.6-3.0 06.04-12.13

View part

FEBI BILSTEIN Gearbox gasket set 38075

View part

FEBI BILSTEIN Gearbox gasket set 38076

View part

FEBI BILSTEIN Indicator breaker, elect. 38077

Traffic indicator breaker (12V number of pins: 6) fits: MERCEDES O 303, O 307, T2/L 01.72-12.95

View part

FEBI BILSTEIN Gear shifter lever ball joint 38078

Gearshift control rod ball-and-socket joint (M14x1,5mm M10x1mm/M14x1,5mm L- 55mm) fits: MERCEDES ACTROS, ATEGO, ATEGO 2, MK, NG, SK 08.73-

View part

FEBI BILSTEIN Engine connecting rod 38079

Engine connecting rod, length 320mm fits: MERCEDES LK/LN2, LP, MK, NG, O 301, O 402, OH, T2/L OM314.910-OM366.999 09.63-

View part

FEBI BILSTEIN Propeller shaft support 38080

Propeller shaft support (45mm) fits: IVECO EUROCARGO I-III, DAILY II, DAILY III, DAILY IV, DAILY V, DAILY VI 01.89-

View part

FEBI BILSTEIN Propeller shaft support 38081

Propeller shaft support (40/82mmx86mm) fits: IVECO DAILY II, DAILY III, DAILY IV, DAILY V 01.89-02.14

View part

FEBI BILSTEIN Air cooler hose 38082

Intercooler hose (101mm/109mmx235mm, black) fits: MAN F90, LION ́S COACH, LION ́S STAR, NG, R NEOPLAN STARLINER, TOURLINER I D0826LUH01-D2876LOH21 06.85-

View part

FEBI BILSTEIN Air cooler hose 38083

Intercooler hose (50/68mm/78mmx180mm, red) fits: MAN CLA, FOC, HOCL, L2000, LION ́S CITY, LION ́S CLASSIC, M 2000 L, M 2000 M, NL, SL II, SÜ STEYR L2000, M2000 D0824FL01-E2876LUH08 06.93-

View part

FEBI BILSTEIN Air cooler hose 38084

Intercooler hose (65mm/73mmx180mm, black) fits: MAN CLA, E2000, EL, EM, F2000, F8, F90, F90 UNTERFLUR, FOC, G, G90, HOCL, L2000, LION ́S CITY, LION ́S CLASSIC D0224MF-G2876DUH02 04.74-

View part

FEBI BILSTEIN Air cooler hose 38085

Intercooler hose (exhaust side, 82mm/105mmx150mm, black) fits: VOLVO 7300, 7500, 8300, 8500, 9400, 9700, 9900, B12, B9, FH12, FH16, FL12, FM10, FM12, FM7, FM9, NH12 D10B360-DH12E460 01.91-

View part

FEBI BILSTEIN Propeller shaft support 38087

Propeller shaft support (80mm) fits: SCANIA 3, 3 BUS 05.87-

View part

FEBI BILSTEIN Air suspension sensor 38088

Air suspension level sensor (number of pins 2) fits: DAF CF 65, CF 75, CF 85, LF, LF 45, LF 55, XF 106, XF 95 RVI KERAX, MAGNUM, MIDLUM, PREMIUM SCANIA F, G I, K I, N BUS, P I, R I, T 12.99-

View part

FEBI BILSTEIN Air cooler hose 38089

Intercooler hose (exhaust side, 82mm/105mmx180mm, black) fits: SCANIA 3 BUS, 4, 4 BUS, F, G I, N BUS, P I, R I, T DC07.101-DT16.08 07.93-

View part

FEBI BILSTEIN Cooling system rubber hose 38090

Cooling system rubber hose (to retarder, top,, red straight reduction, 49mm/61/66mm, length: 100mm) fits: MERCEDES ACTROS, ACTROS MP2 / MP3 OM541.920-OM542.969 04.96-

View part

FEBI BILSTEIN Propeller shaft support 38091

Propeller shaft support (60mm) fits: MERCEDES ATEGO, ATEGO 2, AXOR 2 01.98-

View part

FEBI BILSTEIN Propeller shaft support 38092

Propeller shaft support (70mm, with a bearing) fits: DAF 85, 85 CF, 95, 95 XF, F 3200, F 3300, F 3600 06.81-09.02

View part

FEBI BILSTEIN In-line pump elements 38093

In-line pump elements pressure valve, length: 39mm M12 x 1,5x fits: MERCEDES UNIMOG VOLVO N10 OM312.954-TD101GB 01.62-12.89

View part

FEBI BILSTEIN Air in hose 38094

Air inlet pipe (length:330mm, 170x330 mm) fits: MERCEDES ACTROS, ACTROS MP2 / MP3, ACTROS MP4 / MP5, ANTOS, AROCS, ATEGO, AXOR, AXOR 2 471.943-OM936.916 04.96-

View part

FEBI BILSTEIN In-line pump elements 38095

Stand-by manual pump (85x37,5) fits: DAF FA 65.180, FA 65.220, FA 65.250, FA 65.280, FA 65.300, FA 85.340, FA 85.360, FA 85.380, FA 85.410, FA 85.430, FA 85.460, FA 85.480, FA 85.510, FAC 85.340

View part

FEBI BILSTEIN In-line pump elements 38096

In-line pump elements supply pump inner diameter: 31mm, length: 125mm, width: 90mm, thickness: 95mm 2 x M12 x 1,5x fits: MERCEDES NG, O 303, SK VOLVO B10, F10, F12, FL10 D10A310-THD103KF 01.73-

View part

FEBI BILSTEIN Clutch master cylinder 38097

Clutch master cylinder (hole diameter 24mm) fits: MAN E2000, F2000, F90, F90 UNTERFLUR, FOC, L2000, LION ́S CITY, M 2000 M, M90, NL, NÜ NEOPLAN CENTROLINER STEYR E2000 06.85-

View part

FEBI BILSTEIN Clutch master cylinder 38099

Clutch master cylinder (hole diameter 22mm) fits: MERCEDES MK, SK, TOURINO (O 510) 07.87-

View part

FEBI BILSTEIN Cover, oil radiator 38100

Oil radiator hose fits: MERCEDES NG, O 303, OH, SK, TOURISMO (O 350), TOURO (O 500), TRAVEGO (O 580) NEOPLAN CITYLINER, JETLINER, SKYLINER, TRANSLINER SETRA 400 OM401.905-OM475.976 01.70-

View part

FEBI BILSTEIN Cover, oil radiator 38101

Oil radiator hose fits: MERCEDES MK, NG, O 303, O 330, OH, SK NEOPLAN CITYLINER, JETLINER, SKYLINER, TRANSLINER SETRA 300 OM356.999-OM475.976 01.70-

View part

FEBI BILSTEIN Cover, oil radiator 38102

Oil cooler cover MERCEDES MK, O 304, O 340, O 404, OH, SK, TOURISMO (O 350) NEOPLAN MEGALINER, TRANSLINER SETRA 300 OM401.970-OM446.946 01.70-

View part

FEBI BILSTEIN Air in hose 38103

Air inlet pipe (170mm, length:155mm) fits: MERCEDES ATEGO, ATEGO 2, ECONIC, MK, SK M476.920-OM926.934 07.87-

View part

FEBI BILSTEIN MacPherson strut mount 38106

MacPherson strut mount rear R fits: ALFA ROMEO 147, GT 1.6-3.2 10.00-09.10

View part

FEBI BILSTEIN MacPherson strut mount 38109

MacPherson strut mount front R (with a bearing) fits: FIAT DOBLO, PALIO, SIENA, STRADA MAZDA 626 V 1.2-2.0 04.96-

View part

FEBI BILSTEIN MacPherson strut mount 38110

MacPherson strut mount front L (with a bearing) fits: FIAT DOBLO, PALIO, SIENA, STRADA MAZDA 626 V 1.2-2.0 04.96-

View part

FEBI BILSTEIN Air in hose 38112

Air inlet pipe (225/230mm/235mm, length:85mm) fits: MERCEDES ACTROS, ACTROS MP2 / MP3, ATEGO, AXOR, AXOR 2 OM457.910-OM926.990 04.96-

View part

FEBI BILSTEIN Wing bracket 38113

Wing bracket L/R, length: 205mm fits: MERCEDES ACTROS, ACTROS MP2 / MP3, ATEGO, AXOR, AXOR 2 04.96-

View part

FEBI BILSTEIN Compressor repair kit 38114

Compressor repair kit fits: MERCEDES MK, NG, O 303, O 304, O 305, O 307, O 340, O 403, O 404, O 405, O 407, O 408, SK, TOURISMO (O 350) 04.73-

View part

FEBI BILSTEIN Fan assembly element 38116

Fan assembly element (bolt, M8x1,25, length: 16mm)

View part

FEBI BILSTEIN Relay valve 38117

Relay valve (M22x1,5/M16x1,5) fits: MAN F8, F90, F90 UNTERFLUR, G, G90, HOCL, M90 MERCEDES LK/LN2, LP, NG, O 302, O 303, O 305, O 307, OH, SK

View part

FEBI BILSTEIN Relay valve 38118

Relay valve (M22x1,5) fits: MAN NG, R MERCEDES O 303, O 305, O 307, T2/L RVI C, MAJOR, MANAGER, R

View part

FEBI BILSTEIN Clutch servo 38119

Clutch actuator (fill Medium: brake fluid) fits: MERCEDES MK, OH, SK 01.70-

View part

FEBI BILSTEIN Clutch servo 38120

Clutch actuator (fill Medium: brake fluid) fits: MERCEDES CITARO (O 530), CONECTO (O 345), INTEGRO (O 550), MK, SK, TOURISMO (O 350), TOURO (O 500), TRAVEGO (O 580) SETRA 400 07.87-

View part

FEBI BILSTEIN Clutch servo 38122

Clutch actuator (fill Medium: brake fluid) fits: MERCEDES MK, NG, SK, UNIMOG 12.85-

View part

Buying with Partios

Buying FEBI BILSTEIN parts through Partios

Are these genuine FEBI BILSTEIN parts?

Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FEBI BILSTEIN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.

Do you supply FEBI BILSTEIN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FEBI BILSTEIN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FEBI BILSTEIN order?

It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FEBI BILSTEIN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account