Partios Wholesale catalogue

Febi Bilstein Distributor | Parts

Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)

59,502 current catalogue lines

About the FEBI BILSTEIN range

The Febi Bilstein range at Partios is broad rather than specialised. It has 59,502 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 59,502 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

FEBI BILSTEIN Gearbox bearing 37930

Gearbox bearing (21,5) fits: AUDI A1, A2, A3 SEAT ALTEA, ALTEA XL, CORDOBA, IBIZA III, IBIZA IV, IBIZA IV SC, IBIZA IV ST, LEON, TOLEDO III, TOLEDO IV SKODA FABIA I, FABIA I PRAKTIK 1.0-2.0D 10.99-

View part

FEBI BILSTEIN Light regulation 37932

Headlight height adjuster L/R 01.00-

View part

FEBI BILSTEIN Air suspension bellows 37933

Air suspension bellows rear (diameter: 205/228mm) fits: SCANIA 4 BUS 08.97-08.07

View part

FEBI BILSTEIN Stabilizer bar bushing 37935

Stabilizer bar bushing front L/R (23,5mm) fits: BMW 3 (E36), Z3 (E36) 1.6-1.9 09.90-01.03

View part

FEBI BILSTEIN Stabilizer bar bushing 37937

Stabilizer bar bushing front L/R (25,5mm) fits: BMW 3 (E36), Z3 (E36) 1.7D-3.0 09.90-01.03

View part

FEBI BILSTEIN Stabilizer bar bushing 37938

Stabilizer bar bushing front L/R (25,5mm) fits: BMW 3 (E36), Z3 (E36) 1.6-3.0 09.90-01.03

View part

FEBI BILSTEIN Sump drain hole bolt 37940

Oil sump drain bolt M18x1,5 fits: ALFA ROMEO 147, 156, 159, 166, BRERA, GT, GTV, SPIDER FIAT BARCHETTA, BRAVA, BRAVO I, BRAVO II, COUPE, CROMA, DOBLO, IDEA, MAREA, MULTIPLA, PALIO 1.4-2.4D 08.94-

View part

FEBI BILSTEIN Sump drain hole bolt 37942

Oil sump drain bolt M18x1,5 fits: ALFA ROMEO 147, 156, 159, 166, BRERA, GT, GTV, SPIDER FIAT BARCHETTA, BRAVA, BRAVO I, BRAVO II, CROMA, DOBLO, IDEA, MAREA, MULTIPLA, PALIO, PUNTO 1.4-2.4D 08.94-

View part

FEBI BILSTEIN Sump drain hole bolt 37944

Oil sump drain bolt M22x1,5 fits: IVECO DAILY III, DAILY IV, DAILY V, DAILY VI CHRYSLER VOYAGER III CITROEN JUMPER III FERRARI 360 SPIDER FIAT DUCATO PEUGEOT BOXER 10.0D-9.8D 01.59-

View part

FEBI BILSTEIN Stabilizer bar bushing 37945

Stabilizer bar bushing front L/R (24mm) fits: BMW 3 (E36), Z3 (E36) 1.6-2.8 09.90-01.03

View part

FEBI BILSTEIN Stabilizer bar bushing 37946

Stabilizer bar bushing front L/R (22,5mm) fits: BMW 3 (E36), Z3 (E36) 1.6-3.2 03.91-01.03

View part

FEBI BILSTEIN MacPherson strut mount 37947

MacPherson strut mount front L/R fits: MERCEDES A (W168) 1.4-2.1 07.97-08.04

View part

FEBI BILSTEIN Rear wishbone silent block 37948

Rear track control arm silent block L/R (bottom/outer rear) fits: MERCEDES GL (X164), GL (X166), GLE (C292), GLE (W166), GLS (X166), M (W164), M (W166), R (W251, V251) 2.2D-6.3 02.05-10.19

View part

FEBI BILSTEIN Transmission mount 37949

Transmission mount front R fits: MERCEDES G (W463), GL (X164), GL (X166), GLE (W166), GLS (X166), M (W164), M (W166) 2.2D-6.3 02.05-

View part

FEBI BILSTEIN Front track control arm silent block 37950

Front track control arm silent block in the front L/R (14,2x57,5/65,5x64,5 mm) fits: MERCEDES GL (X164), GL (X166), GLE (C292), GLE (W166), M (W164), M (W166), R (W251, V251) 2.2D-6.3 02.05-10.19

View part

FEBI BILSTEIN MacPherson strut mount 37951

MacPherson strut mount front L/R (with nuts) fits: CITROEN C5 III PEUGEOT 407, 508, 508 I 1.6-2.2D 03.04-

View part

FEBI BILSTEIN Rear wishbone silent block 37959

Rear track control arm silent block L/R (bottom/outer in the back/rear) fits: BMW 5 (F10), 5 (F11), 5 GRAN TURISMO (F07), 6 (F12), 6 (F13), 6 GRAN COUPE (F06), 7 (F01, F02, F03 1.6-6.0 02.08-10.18

View part

FEBI BILSTEIN MacPherson strut mount 37961

MacPherson strut mount front L/R (with a bearing, with nuts) fits: PEUGEOT 407 1.6D-2.2D 03.04-12.10

View part

FEBI BILSTEIN Brake caliper slideway bolt 37965

Brake caliper slideway bolt fits: MERCEDES COUPE (W111, W112), HECKFLOSSE (W110), HECKFLOSSE (W111, W112), PAGODE (W113), S (W108, W109) 1.9-2.7 08.59-08.72

View part

FEBI BILSTEIN Timing set (pulley+chain) 37966

Timing set (chain + sprocket) fits: MERCEDES A (W168), VANEO (414) 1.7D 07.98-07.05

View part

FEBI BILSTEIN Air suspension bellows 37967

Air suspension bellows rear (diameter: 197/228mm) fits: VOLVO FH, FH II, FH12, FH16, FH16 II, FL, FL6, FM, FM II, FM10, FM12, FM7, FM9, FMX, FMX II 09.85-

View part

FEBI BILSTEIN Upholstery pin 37968

Upholstery pin (quantity per packaging: 10 pcs) fits: AUDI 100 C2, 100 C3, 100 C4, 200 C2, 200 C3, 80 B1, 80 B2, 80 B3, 80 B4, 90 B2, 90 B3, A4 B5, A4 B6, A6 C4, CABRIOLET B3, COUPE B2 01.60-

View part

FEBI BILSTEIN Window washer reservoir 37969

Washer tank fits: VW PASSAT B6 03.05-10.11

View part

FEBI BILSTEIN Window washer reservoir 37970

Washer tank fits: VW PASSAT B6 03.05-10.11

View part

FEBI BILSTEIN MacPherson strut mount 37971

MacPherson strut mount rear R (with nuts) fits: PEUGEOT 307 1.4-2.0D 08.00-12.12

View part

FEBI BILSTEIN Window washer reservoir 37972

Washer tank fits: VW PASSAT B6 03.05-10.11

View part

FEBI BILSTEIN Engine mount 37974

Engine mount rear R, hydraulic fits: OPEL INSIGNIA A SAAB 9-5 1.6/1.8 07.08-03.17

View part

FEBI BILSTEIN Engine mount 37975

Engine mount rear R, hydraulic fits: OPEL ASTRA J, INSIGNIA A, ZAFIRA C 2.0D 07.08-11.18

View part

FEBI BILSTEIN Engine mount 37976

Engine mount front/rear R, hydraulic fits: OPEL ASTRA H, ASTRA J, ASTRA J GTC 1.7D 02.07-10.15

View part

FEBI BILSTEIN Engine mount 37978

Engine mount front/rear L, hydraulic fits: CHEVROLET CRUZE, ORLANDO OPEL ASTRA J, ASTRA J GTC, CASCADA 2.0D 05.09-

View part

FEBI BILSTEIN Multi V-belt pulley 37979

Multi V-belt pulley (metal) fits: AUDI A4 B8, A5, A6 ALLROAD C6, A6 ALLROAD C7, A6 C6, A6 C7, A7, A8 D4, Q5, Q7 PORSCHE CAYENNE, PANAMERA VW TOUAREG 3.0/3.0H 10.08-12.19

View part

FEBI BILSTEIN Alternator pulley 37980

Alternator pulley fits: AUDI A4 ALLROAD B8, A4 B8, A5, A6 C7, A7, Q3, Q5 SEAT EXEO, EXEO ST VW AMAROK, CALIFORNIA T5 CAMPER, MULTIVAN T5, TRANSPORTER T5 1.8/2.0/2.0ALK 10.07-10.18

View part

FEBI BILSTEIN MacPherson strut mount 37981

MacPherson strut mount front L/R (with a bearing, with nuts) fits: PEUGEOT 106 I 1.0-1.6 08.91-04.96

View part

FEBI BILSTEIN Alternator pulley 37982

Alternator pulley fits: AUDI A4 ALLROAD B8, A4 B8, A5, A6 ALLROAD C7, A6 C6, A6 C7, A7, A8 D3, A8 D4, Q5, Q7 VW PHAETON, TOUAREG 2.7D-6.0D 05.04-09.18

View part

FEBI BILSTEIN Oil filter 37983

Oil filter fits: MERCEDES C (CL203), C (W203), C (W204), C T-MODEL (S203), C T-MODEL (S204), CLC (CL203), CLK (A209), CLK (C209), E (W211), E (W212), E T-MODEL (S211) 1.6-5.5 05.02-12.18

View part

FEBI BILSTEIN Crankshaft sensor 37984

Crankshaft position sensor fits: MERCEDES C (C204), C (CL203), C (W203), C (W204), C (W205), C T-MODEL (S203), C T-MODEL (S204), C T-MODEL (S205), CLC (CL203), CLK (A209) 1.6D-6.3 06.04-

View part

FEBI BILSTEIN Gas spring 37985

Gas spring engine bonnet R max length: 609mm, stroke:216mm fits: MERCEDES GLK (X204) SUV 06.08-12.15

View part

FEBI BILSTEIN Suspension air spring base 37986

Lower bellows support, reel piston fits: VOLVO 7000, 7500, 7700, 8300, 8500, 8700, 9400, 9700, 9900, B12, F10, F12, F16, FH12, FH16, FL, FL10, FL12, FL6, FL7, FM10, FM12, FM7, FS7 09.85-

View part

FEBI BILSTEIN Compressor repair kit 37987

Compressor repair kit fits: MERCEDES ACTROS, ACTROS MP2 / MP3, TRAVEGO (O 580) SETRA 400 04.96-

View part

FEBI BILSTEIN Compressor crankshaft 37988

Compressor crankshaft fits: MERCEDES ACTROS 1222/1222 A/1222 A, 1222 LA/1222 AF/1222 AS/1222 F/1222 S/1222 S, 1222 LS/1224 AF/1224 F/1225 AF/1226 AF/1227 A/1227 AF/1227 AF, 1227 LAF/1228 AF/1228 F/123

View part

FEBI BILSTEIN Compressor head 37989

Compressor cylinder head fits: MERCEDES AXOR 1835 LS/1836 LS, LLS/1840 LS/1840 LS, LLS/1843 LS/1843 LS, LLS/2435 LS/2436 LS, 2536 LS/2440 LS, 2540 LS/2443 LS, 2543 LS/2535 L, 2536 L, 2536 LL/2535 LS/2

View part

FEBI BILSTEIN Camshaft oil seal 37990

Camshaft oil seal (35x46x7) fits: AUDI A2 VW BORA, BORA I, GOLF IV, LUPO I, POLO 1.4/1.6 10.99-06.06

View part

FEBI BILSTEIN MacPherson strut mount 37991

MacPherson strut mount front L/R (with a bearing, with nuts) fits: CITROEN SAXO PEUGEOT 106 I, 106 II 1.0-Electric 08.91-07.04

View part

FEBI BILSTEIN Pushrod 37992

Valve tappet hydraulic (diameter: 12mm) fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93), 5 (E60), 5 (E61), 5 (F10), 5 (F11), 6 (E63), 6 (E64) 2.5/3.0 09.04-06.15

View part

FEBI BILSTEIN Front track control arm silent block 37993

Front track control arm silent block in the front L/R (18x55x48 mm) fits: DS DS 3 CITROEN C3 II, C3 III, C4 CACTUS, DS3 PEUGEOT 208, 208 I 1.0-1.6D 09.09-

View part

FEBI BILSTEIN Magnetic valve 37996

Magnetic valve fits: SCANIA 3 BUS, 4, 4 BUS, F, G I, K I, N BUS, P I, R I, T 07.93-

View part

FEBI BILSTEIN Transmission oil seal 37997

Gearbox seal/leak stopper fits: MERCEDES LK/LN2, MK, NG, SK, T2/L 01.59-12.98

View part

FEBI BILSTEIN Gear selector element 37998

Gear selector element fits: MERCEDES MK, NG, SK 08.73-12.98

View part

Buying with Partios

Buying FEBI BILSTEIN parts through Partios

Are these genuine FEBI BILSTEIN parts?

Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FEBI BILSTEIN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.

Do you supply FEBI BILSTEIN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FEBI BILSTEIN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FEBI BILSTEIN order?

It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FEBI BILSTEIN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account