Partios Wholesale catalogue

Febi Bilstein Distributor | Parts

Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)

61,674 current catalogue lines

About the FEBI BILSTEIN range

The Febi Bilstein range at Partios is broad rather than specialised. It has 61,674 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 61,674 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

FEBI BILSTEIN Axle rubber boot set 30085

Joint rubber boot outside/rear (fi: 29/96) (length108) fits: MERCEDES M (W163) 2.3-5.4 02.98-06.05

View part

FEBI BILSTEIN Wheel bearing kit 30087

Wheel bearing kit front L/R (40x74x40) fits: KIA CARNIVAL II, CERATO I, SEPHIA, SHUMA, SHUMA I, SHUMA II, SORENTO I MAZDA 323 C IV, 323 C V, 323 F IV, 323 F V, 323 F VI 1.3-3.3 06.89-12.11

View part

FEBI BILSTEIN Tie rod end 30089

Tie rod end R fits: HYUNDAI ACCENT III, ACCENT IV KIA RIO II 1.4-1.6D 03.05-

View part

FEBI BILSTEIN Tie rod end 30090

Tie rod end L fits: HYUNDAI ACCENT III, ACCENT IV KIA RIO II 1.4-1.6D 03.05-

View part

FEBI BILSTEIN Tie rod (with no end) 30091

Tie rod (with no end) L/R (length: 193mm, with counter-nut) fits: HYUNDAI SANTA FÉ II 2.0D-3.5 11.05-05.13

View part

FEBI BILSTEIN Tie rod (with no end) 30092

Tie rod (with no end) L/R (length: 292mm) fits: HYUNDAI H-1, H-1 / STAREX 2.4/2.5D/2.6D 06.97-12.07

View part

FEBI BILSTEIN Engine mount 30093

Engine mount front L, rubber-metal fits: FORD TRANSIT 2.4D 01.00-08.14

View part

FEBI BILSTEIN Engine mount 30094

Engine mount front R, rubber-metal fits: FORD TRANSIT 2.4D 01.00-08.14

View part

FEBI BILSTEIN Gas spring 30095

Gas spring trunk lid L/R max length: 300mm, stroke:107mm fits: RENAULT MEGANE I CLASSIC SEDAN 09.96-08.03

View part

FEBI BILSTEIN Tie rod (with no end) 30096

Tie rod (with no end) L/R (length: 288mm) fits: MERCEDES VIANO (W639), VITO / MIXTO (W639), VITO (W639) 2.1D-Electric 09.03-

View part

FEBI BILSTEIN Crankshaft pulley 30097

Crankshaft pulley (number of ribs: 5) fits: FORD MONDEO III, TRANSIT JAGUAR X-TYPE I 2.0D/2.2D 08.00-12.09

View part

FEBI BILSTEIN Water pump 30102

Water pump fits: MAN E2000, F2000, F90, FOC, TGA, TGX I STEYR E2000 D2066LF01-E2866DF01 06.85-

View part

FEBI BILSTEIN Engine mount 30103

Engine mount rear R, rubber-metal fits: BMW X3 (E83) 2.0D 09.04-08.07

View part

FEBI BILSTEIN Engine mount 30104

Engine mount front R, rubber-metal fits: OPEL ASTRA H 1.7D 03.04-10.10

View part

FEBI BILSTEIN Engine mount 30105

Engine mount front L, rubber-metal fits: OPEL ASTRA G, ASTRA H, ASTRA H CLASSIC, ASTRA H GTC, ZAFIRA B 1.3D-1.8 02.98-04.15

View part

FEBI BILSTEIN Engine mount 30106

Engine mount front L, rubber-metal fits: OPEL ASTRA G, ASTRA H, ASTRA H GTC, MERIVA B, ZAFIRA B, ZAFIRA B FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.4-2.2 02.98-03.17

View part

FEBI BILSTEIN Engine mount 30107

Engine mount front L, rubber-metal fits: OPEL ASTRA H, ASTRA H GTC, MERIVA B, ZAFIRA B 1.4-2.2 03.04-03.17

View part

FEBI BILSTEIN Engine mount 30108

Engine mount front L, housing of a gearbox, rubber-metal fits: OPEL ASTRA G, ASTRA H, ASTRA H GTC, MERIVA B, ZAFIRA B 1.3D-1.8 02.98-04.15

View part

FEBI BILSTEIN Engine mount 30109

Engine mount front R, middle, rubber-metal fits: OPEL ASTRA H, ASTRA H GTC, ZAFIRA B, ZAFIRA B FURGON/NADWOZIE WIELKOPRZESTRZENNE 2.0/2.2 03.04-12.12

View part

FEBI BILSTEIN Engine mount 30110

Engine mount front R, middle, rubber-metal fits: OPEL ASTRA H, ASTRA H GTC, MERIVA B, ZAFIRA B, ZAFIRA B FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.6D/1.7D 03.04-03.17

View part

FEBI BILSTEIN Tie rod (with no end) 30111

Tie rod (with no end) L/R (length: 292mm) fits: HYUNDAI H100 2.4/2.5D/2.6D 07.93-03.00

View part

FEBI BILSTEIN Tie rod (with no end) 30112

Tie rod (with no end) L/R (length: 305mm) fits: HYUNDAI SONATA II 2.0/2.4/3.0 09.88-10.93

View part

FEBI BILSTEIN Alternator pulley 30113

Alternator pulley fits: BMW 1 (E87), 3 (E46), 3 (E90), 3 (E91), 5 (E60), 5 (E61), 6 (E63), 6 (E64), 7 (E65, E66, E67), Z4 (E85) 1.6-4.4D 06.01-12.11

View part

FEBI BILSTEIN Multi V-belt pulley 30114

Multi V-belt pulley (metal) fits: BMW 3 (E46), 5 (E39), 7 (E38), X5 (E53) LAND ROVER RANGE ROVER III OPEL OMEGA B 2.5D/3.0D 08.98-08.12

View part

FEBI BILSTEIN Multiple V-belt tensioning roll 30116

Multiple V-belt tensioning roll fits: BMW 3 (E46), 5 (E39), 7 (E38), X5 (E53) 2.5D/3.0D 08.98-02.05

View part

FEBI BILSTEIN Multi-V belt tensioner 30117

Multi-V belt tensioner fits: BMW 3 (E46), 5 (E39), 7 (E38), X5 (E53) 2.0D/2.5D/3.0D 04.98-02.05

View part

FEBI BILSTEIN Multiple V-belt tensioning roll 30118

Multiple V-belt tensioning roll fits: BMW 3 (E46), 5 (E39), 7 (E38) 2.5D/3.0D 08.98-02.05

View part

FEBI BILSTEIN Multi V-belt pulley 30119

Multi V-belt pulley (plastic) fits: BMW 1 (E82), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93), 5 (E60) 3.0 04.06-10.13

View part

FEBI BILSTEIN Multi V-belt pulley 30120

Multi V-belt pulley (plastic) fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93), 5 (E60), 5 (E61), 6 (E63), 6 (E64), 7 (E65, E66, E67) 2.2/2.5/3.0 12.01-12.13

View part

FEBI BILSTEIN Multi-V belt tensioner 30121

Multi-V belt tensioner fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E46), 3 (E90), 3 (E91), 3 (E92), 3 (E93), 5 (E60), X1 (E84), X3 (E83), Z4 (E85) 1.6/1.8/2.0 12.00-06.15

View part

FEBI BILSTEIN Power steering pump pulley 30123

Power steering pump pulley (outer diameter: 135mm) fits: BMW 3 (E36), 3 (E46), 5 (E39), 7 (E38), X3 (E83), Z3 (E36) 2.0-3.0D 01.91-08.08

View part

FEBI BILSTEIN Water pump pulley 30124

Water pump pulley fits: BMW 3 (E36), 3 (E46), 5 (E34), 5 (E39), 7 (E38), Z3 (E36) 2.0/2.5/2.8 03.90-06.03

View part

FEBI BILSTEIN Water pump pulley 30125

Water pump pulley fits: BMW 3 (E46), 5 (E39), 5 (E60), 5 (E61), 7 (E38), 7 (E65, E66, E67), X3 (E83), X5 (E53), Z3 (E36), Z4 (E85) 2.0-3.0 08.95-12.10

View part

FEBI BILSTEIN Stabilizer link 30126

Stabilizer link front L 274mm fits: KIA CARENS I, SHUMA, SHUMA I, SHUMA II 1.5/1.6/1.8 10.97-08.04

View part

FEBI BILSTEIN Stabilizer link 30127

Stabilizer link front R 274mm fits: KIA CARENS I, SHUMA, SHUMA I, SHUMA II 1.5/1.6/1.8 10.97-08.04

View part

FEBI BILSTEIN Multi-V belt tensioner 30128

Multi-V belt tensioner fits: VOLVO S80 II, V70 III CITROEN C5 II, C5 III, C6, C8, C-CROSSER, C-CROSSER ENTERPRISE FIAT ULYSSE FORD C-MAX, FOCUS C-MAX, FOCUS II, GALAXY II 2.0/2.0D/2.2D 08.02-

View part

FEBI BILSTEIN Multi-V belt tensioner 30129

Multi-V belt tensioner fits: BMW 1 (E82), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93), 5 (E60) 3.0 04.06-10.13

View part

FEBI BILSTEIN Multiple V-belt tensioning roll 30130

Multiple V-belt tensioning roll fits: MINI (R50, R53), (R52) 1.6 03.02-07.08

View part

FEBI BILSTEIN Multi-V belt tensioner 30131

Multi-V belt tensioner fits: MINI (R50, R53), (R52) 1.6 03.02-07.08

View part

FEBI BILSTEIN Rocker arm 30132

Rocker arm fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 1 (F20), 1 (F21), 1 (F40), 2 (F22, F87), 2 (F23), 2 (F45), 2 (G42, G87), 2 GRAN COUPE (F44), 2 GRAN TOURER (F46) 1.5D-3.0H 12.04-

View part

FEBI BILSTEIN Pushrod 30133

Valve tappet hydraulic (diameter: 12mm) fits: DS DS 3, DS 4, DS 7 MERCEDES A (W177), B SPORTS TOURER (W247), CLA (C118), CLA SHOOTING BRAKE (X118) BMW 1 (F20) 1.3-2.0H 02.06-

View part

FEBI BILSTEIN Pushrod 30134

Valve tappet hydraulic (diameter: 12mm) fits: DS DS 3, DS 4, DS 7 BMW 1 (F20) CITROEN BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, BERLINGO MULTISPACE, C3 II, C3 PICASSO, C4 1.4-1.6LPG 09.06-

View part

FEBI BILSTEIN Rocker arm 30136

Rocker arm fits: CHEVROLET AVEO, VOLT OPEL ADAM, AGILA A, ASTRA G, ASTRA G CLASSIC, ASTRA H, ASTRA H GTC, ASTRA J, ASTRA J GTC, CASCADA, COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.0-1.4LPG 11.96-

View part

FEBI BILSTEIN Rocker arm 30137

Rocker arm fits: BMW 1 (E87), 3 (E46), 3 (E90), 3 (E91), 3 (E92), 3 (E93), 5 (E39), 5 (E60), 5 (E61), 6 (E63), 6 (E64), 7 (E38), 7 (E65, E66, E67), X3 (E83), X5 (E53) 2.0D-4.4D 02.98-12.13

View part

FEBI BILSTEIN Crankshaft pulley 30138

Crankshaft pulley (number of ribs: 5) fits: PEUGEOT BOXER 1.9D 03.94-04.02

View part

FEBI BILSTEIN Crankshaft pulley 30139

Crankshaft pulley (number of ribs: 4) fits: CITROEN XM PEUGEOT 605 2.1D 05.89-09.99

View part

FEBI BILSTEIN Axle rubber boot set 30142

Joint rubber boot front/outside (fi: 29/97) (length115) fits: AUDI A3, TT SEAT CORDOBA, IBIZA III, LEON, TOLEDO II SKODA OCTAVIA I, OCTAVIA II VW BORA, BORA I, CADDY III 1.0-2.8 12.96-

View part

FEBI BILSTEIN Engine mount 30143

Engine mount rear R, bottom, rubber-metal fits: VOLVO C30, C70 II, S40 II, V50 FORD FOCUS II, FOCUS III, KUGA II 1.6-2.5 01.04-09.14

View part

Buying with Partios

Buying FEBI BILSTEIN parts through Partios

Are these genuine FEBI BILSTEIN parts?

Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FEBI BILSTEIN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.

Do you supply FEBI BILSTEIN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FEBI BILSTEIN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FEBI BILSTEIN order?

It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FEBI BILSTEIN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account