Partios Wholesale catalogue

Febi Bilstein Distributor | Parts

Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)

61,663 current catalogue lines

About the FEBI BILSTEIN range

The Febi Bilstein range at Partios is broad rather than specialised. It has 61,663 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 61,663 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

FEBI BILSTEIN Engine valve 19958

Intake valve (36x8x96,9) fits: VOLVO 850, S70, S80 I, V70 I, V70 II AUDI 100 C3, 100 C4, A6 C4 VW CALIFORNIA T4 CAMPER, CRAFTER 30-35, CRAFTER 30-50, LT 28-35 II 1.9D/2.0/2.5D 01.90-05.13

View part

FEBI BILSTEIN Lambda sensor 199581

Lambda probe (number of wires 6, 850mm) fits: AUDI A3, A4 B5, A4 B6, A4 B7, A6 C5, A8 D3, TT SEAT EXEO, EXEO ST, LEON, TOLEDO II VW BORA, BORA I, GOLF IV, NEW BEETLE 1.4-4.2 11.94-12.14

View part

FEBI BILSTEIN Harness wire 199582

Harness wire with clamp connector (250mm)

View part

FEBI BILSTEIN Harness wire 199583

Harness wire with clamp connector (250mm, number of pins: 8)

View part

FEBI BILSTEIN Harness wire 199584

Harness wire with clamp connector (250mm)

View part

FEBI BILSTEIN Door lock 199585

Door lock front L fits: AUDI A1, A4 ALLROAD B8, A4 B8, A5, A6 ALLROAD C7, A6 C7, A7, A8 D4, Q3, Q5, Q7, TT PORSCHE 718 BOXSTER, 911, BOXSTER, BOXSTER SPYDER, CAYENNE, CAYMAN, MACAN 03.06-

View part

FEBI BILSTEIN Harness wire 199588

Harness wire with clamp connector (250mm, number of pins: 2)

View part

FEBI BILSTEIN Wheel suspension track control arm, front 19959

Front axle track control arm R bottom front 17 mm fits: FIAT STILO 1.2-2.4 10.01-08.08

View part

FEBI BILSTEIN Outline marker lights 199590

Outline marker lights L/R, LED, height 57mm width 110mm depth 64mm, cable length 500mm, 24V fits: VOLVO FH, FH II, FH III, FH12, FH16, FH16 II, FH16 III, FL, FL6, FLC, FM, FM II, FM III 09.85-

View part

FEBI BILSTEIN Harness wire 199591

Harness wire with clamp connector (250mm)

View part

FEBI BILSTEIN Wire plug 199592

Wire plug, number of pins: 14

View part

FEBI BILSTEIN Harness wire 199593

Harness wire with clamp connector (250mm)

View part

FEBI BILSTEIN Wire plug 199594

Wire plug, number of pins: 5

View part

FEBI BILSTEIN Harness wire 199595

Harness wire with clamp connector (250mm)

View part

FEBI BILSTEIN Harness wire 199596

Harness wire with clamp connector (250mm, number of pins: 10)

View part

FEBI BILSTEIN Harness wire 199597

Harness wire with clamp connector (250mm)

View part

FEBI BILSTEIN Harness wire 199598

Harness wire with clamp connector (250mm, number of pins: 3, 0,75)

View part

FEBI BILSTEIN Harness wire 199599

Harness wire with clamp connector (250mm)

View part

FEBI BILSTEIN Engine valve 19960

Exhaust valve (31,5x8x96,9) fits: VOLVO 850, S70, S80 I, V70 I, V70 II AUDI 100 C3, 100 C4, 80 B4, A4 B5, A6 C4, CABRIOLET B3 SEAT ALHAMBRA, TOLEDO I VW CALIFORNIA T4 CAMPER 1.6-2.5D 01.90-05.13

View part

FEBI BILSTEIN Wire plug 199600

Wire plug, number of pins: 3

View part

FEBI BILSTEIN Harness wire 199601

Harness wire with clamp connector (250mm, number of pins: 8)

View part

FEBI BILSTEIN Harness wire 199602

Harness wire with clamp connector (250mm)

View part

FEBI BILSTEIN Harness wire 199603

Harness wire with clamp connector (250mm, number of pins: 5)

View part

FEBI BILSTEIN Harness wire 199604

Harness wire with clamp connector (250mm) fits: DAF MAN RVI

View part

FEBI BILSTEIN Harness wire 199605

Harness wire with clamp connector (250mm, number of pins: 4)

View part

FEBI BILSTEIN Harness wire 199606

Harness wire with clamp connector (250mm)

View part

FEBI BILSTEIN Reaction bar 199607

Control rod rear L/R (L-595mm) fits: IRISBUS EURORIDER 01.01-12.13

View part

FEBI BILSTEIN Center link 199608

Longitudinal steering rod (L-919mm) fits: DAF LF, LF 55, XB, XBC 01.01-

View part

FEBI BILSTEIN Center link 199609

Longitudinal steering rod (L-1206mm) fits: SCANIA 4, G I, P I, R I, T 05.95-09.22

View part

FEBI BILSTEIN Wheel suspension track control arm, front 19961

Front axle track control arm L bottom front 17 mm fits: FIAT STILO 1.2-2.4 10.01-08.08

View part

FEBI BILSTEIN Center link 199610

Longitudinal steering rod (L-2006mm) fits: SCANIA 4, G I, P I, R I, T 05.95-09.22

View part

FEBI BILSTEIN Center link 199611

Longitudinal steering rod (L-978mm) fits: MAN TGM I, TGM II 10.05-

View part

FEBI BILSTEIN Center link 199612

Longitudinal steering rod (L-1025mm) fits: SCANIA G I, P I, R I, T 01.03-09.22

View part

FEBI BILSTEIN Center link 199613

Longitudinal steering rod (L-860mm) fits: RVI C, PREMIUM 2 10.05-

View part

FEBI BILSTEIN Center link 199614

Longitudinal steering rod (L-679mm) fits: MERCEDES AROCS 01.13-

View part

FEBI BILSTEIN Cross rod 199615

Cross rod (L-1374mm) fits: MERCEDES ACTROS MP4 / MP5, ANTOS, AROCS, ECONIC 2 07.11-

View part

FEBI BILSTEIN Center link 199616

Longitudinal steering rod (L-1021mm) fits: MAN TGA, TGS I, TGS II 03.02-

View part

FEBI BILSTEIN Center link 199617

Longitudinal steering rod (L-1376mm) fits: RVI D, D ACCESS, KERAX 10.05-

View part

FEBI BILSTEIN Cross rod 199618

Cross rod (L-1668mm) fits: VOLVO FH, FH II, FH III, FH16, FH16 II, FH16 III, FM, FM II, FM III, FMX II, FMX III 01.03-

View part

FEBI BILSTEIN Tie rod end 199619

Tie rod end (M30/M24x1,5mm, L-80mm)

View part

FEBI BILSTEIN Engine valve 19962

Exhaust valve (33,2x8x91,2) fits: AUDI 80 B3, 80 B4, A6 C4, CABRIOLET B3, COUPE B3 VW CALIFORNIA T4 CAMPER, CORRADO, GOLF I, GOLF II, GOLF III, GOLF IV, JETTA II, PASSAT B2 1.3-2.8 08.80-06.03

View part

FEBI BILSTEIN Torque arm silent block 199620

Lateral control rod silentblock (107, hole diameter 23mm) fits: RVI K, KERAX VOLVO FH, FH II, FH16, FM, FMX 06.97-

View part

FEBI BILSTEIN Center link 199621

Longitudinal steering rod (L-1578mm) fits: SCANIA G II, L, P II, R II, S 09.16-

View part

FEBI BILSTEIN Center link 199622

Longitudinal steering rod (L-984mm) fits: SCANIA G II, L, P II, R II, S 09.16-

View part

FEBI BILSTEIN Center link 199623

Longitudinal steering rod (L-440mm) fits: SCANIA G II, L, P II, R II, S 09.16-

View part

FEBI BILSTEIN Center link 199624

Longitudinal steering rod (L-785mm) fits: DAF CF, XF 106, XF II 10.12-

View part

FEBI BILSTEIN Center link 199625

Longitudinal steering rod (L-920mm) fits: DAF CF 65 05.06-05.13

View part

FEBI BILSTEIN Torque arm silent block 199626

Lateral control rod silentblock (bushing 95, hole diameter 21mm) fits: SCANIA G I, P I, R I, T 01.03-09.22

View part

Buying with Partios

Buying FEBI BILSTEIN parts through Partios

Are these genuine FEBI BILSTEIN parts?

Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FEBI BILSTEIN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.

Do you supply FEBI BILSTEIN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FEBI BILSTEIN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FEBI BILSTEIN order?

It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FEBI BILSTEIN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account