Partios Wholesale catalogue

Febi Bilstein Distributor | Parts

Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)

61,663 current catalogue lines

About the FEBI BILSTEIN range

The Febi Bilstein range at Partios is broad rather than specialised. It has 61,663 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 61,663 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

FEBI BILSTEIN Disc brake caliper 196798

Disc brake caliper front R (new) fits: MERCEDES A (W169) 1.5/2.0D 09.04-06.12

View part

FEBI BILSTEIN Stabilizer bar sleeve 196799

Rubber ring for stabilizing bar front (24/50x41mm) fits: SCANIA 4 BUS, F, K I, N BUS 08.97-

View part

FEBI BILSTEIN Engine mount 19680

Engine mount front L/R, hydraulic fits: MERCEDES C (CL203), C T-MODEL (S203), C (W203), CLC (CL203), CLK (A209), CLK (C209), E T-MODEL (S211), E (W211), SL (R230) 1.6-3.7 03.02-01.12

View part

FEBI BILSTEIN Engine mount 196800

Engine mount rear L/R (rubber-metal) fits: MAN TGS I, TGS II, TGX I, TGX II D1556LF07-D3876LF12 06.06-

View part

FEBI BILSTEIN MacPherson strut mount 196801

MacPherson strut mount front L/R fits: MERCEDES C (A205), C (C205), C T-MODEL (S205), C (W205), CLS (C257), E (A238), E ALL-TERRAIN (S213), E (C238), E T-MODEL (S213), E (W213) 1.5-Electric 12.13-

View part

FEBI BILSTEIN Drive shaft flexible joint 196803

Propeller shaft elastic coupling in the back (outer diameter 160mm) fits: FORD GALAXY II, S-MAX, TRANSIT, TRANSIT V363 2.0D-3.2D 01.00-

View part

FEBI BILSTEIN Bolts, nuts and pins 196805

Wheel bolt (M14x1,5, thread length: 18mm, length: 27/54mm, wrench size: 17mm) fits: MASERATI GHIBLI III, LEVANTE, QUATTROPORTE VI 3.0/3.0D/3.8 01.13-

View part

FEBI BILSTEIN Engine mount 19681

Engine mount front L/R, hydraulic fits: MERCEDES C T-MODEL (S203), C (W203) 1.8/2.6/3.2 05.02-08.07

View part

FEBI BILSTEIN Disc brake caliper 196811

Disc brake caliper rear L (new) fits: MERCEDES C (CL203), C T-MODEL (S203), C (W203), CLC (CL203), CLK (A208), CLK (A209), CLK (C208), CLK (C209), E (W210), SLK (R171) 1.8-5.0 06.95-06.11

View part

FEBI BILSTEIN Disc brake caliper 196812

Disc brake caliper rear R (new) fits: MERCEDES C (CL203), C T-MODEL (S203), C (W203), CLC (CL203), CLK (A208), CLK (A209), CLK (C208), CLK (C209), E (W210), SLK (R171) 1.8-5.0 06.95-06.11

View part

FEBI BILSTEIN Brake caliper motor 196813

Brake calliper servo rear L (number of teeth 6) fits: MERCEDES C (A205), C (C205), C T-MODEL (S205), C (W205), GLC (C253), GLC (X253) 1.5-Electric 12.13-04.23

View part

FEBI BILSTEIN Brake caliper motor 196814

Brake calliper servo rear R (number of teeth 6) fits: MERCEDES A (W176), B SPORTS TOURER (W245), B SPORTS TOURER (W246, W242), C (A205), C (C205), C T-MODEL (S205), C (W205) 1.5-Electric 03.05-04.23

View part

FEBI BILSTEIN Disc brake caliper 196815

Disc brake caliper rear L (new) fits: MERCEDES C (C204), C T-MODEL (S204), C (W204), E (A207), E (C207) 1.6-3.0 01.07-

View part

FEBI BILSTEIN Disc brake caliper 196816

Disc brake caliper rear R (new) fits: MERCEDES C (C204), C T-MODEL (S204), C (W204), E (A207), E (C207) 1.6-3.0 01.07-

View part

FEBI BILSTEIN Disc brake caliper 196817

Disc brake caliper front L (new) fits: CITROEN C5 I, C5 II 1.6D-2.2D 03.01-08.08

View part

FEBI BILSTEIN Disc brake caliper 196818

Disc brake caliper front R (new) fits: CITROEN C5 I, C5 II 1.6D-2.2D 03.01-08.08

View part

FEBI BILSTEIN Leaf spring silent block 196819

Silentblock/spring bush rear L/R (60x25,1) fits: VOLVO FE 05.06-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 196820

Front axle track control arm L/R top front 16,6/20 mm fits: IVECO DAILY VI 2.3D-Electric 03.14-

View part

FEBI BILSTEIN Cab suspension silent block 196821

Cabin suspension silentblock front (14/88x86-93) fits: MAN TGL I, TGL II, TGM I, TGM II 01.04-

View part

FEBI BILSTEIN Clutch release bearing 196822

Clutch thrust bearing fits: MERCEDES ACTROS, ATEGO, ATEGO 2, ATEGO 3, AXOR, AXOR 2, ZETROS 04.96-

View part

FEBI BILSTEIN High-pressure fuel pump 196823

High pressure fuel pump fits: MERCEDES C (C204), C T-MODEL (S204), C (W204), CLS (C218), CLS SHOOTING BRAKE (X218), E (A207), E (C207), E T-MODEL (S212), E (W212), GLK (X204) 3.5/3.5H 06.08-

View part

FEBI BILSTEIN Multi V-belt pulley 196824

Multi V-belt pulley (plastic) fits: MERCEDES C (A205), C (C205), C T-MODEL (S205), C (W205), CLS (C257), E (A238), E ALL-TERRAIN (S213), E (C238), E T-MODEL (S213), E (W213) 1.6D-3.0D 01.16-

View part

FEBI BILSTEIN Clutch release bearing 196825

Clutch thrust bearing fits: MERCEDES ATEGO, ATEGO 2, AXOR 2, ECONIC 01.98-

View part

FEBI BILSTEIN Timing set (chain+ elements) 196827

Timing set (chain + elements) fits: DS DS 3 / DS 3, DS 4 II, DS 7 CITROEN AMI, BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, C3 AIRCROSS II, C3 III, C3 ORIGIN III 1.5D/Electric 02.14-

View part

FEBI BILSTEIN Flexible brake hoses 196828

Brake pipe/hose front L (length 353mm, M10x1) fits: JAGUAR S-TYPE II, XF I 2.5-4.2 01.99-04.15

View part

FEBI BILSTEIN Flexible brake hoses 196829

Brake pipe/hose front R (length 353mm, M10x1) fits: JAGUAR S-TYPE II, XF I 2.5-4.2 01.99-04.15

View part

FEBI BILSTEIN ABS sensor 196832

ABS sensor rear L/R (1210mm, 2pin) fits: DAF CF, XD, XF 106, XF II, XG, XG+

View part

FEBI BILSTEIN Axle shaft 196839

Drive axle shaft front R 715mm fits: TESLA MODEL S Electric 01.14-04.26

View part

FEBI BILSTEIN Stabilizer link 19685

Stabilizer link front L/R 276mm fits: MERCEDES C (CL203), C T-MODEL (S203), C (W203), CLC (CL203), CLK (A209), CLK (C209) 1.6-6.3 05.00-06.11

View part

FEBI BILSTEIN Multi V-belt pulley 196854

Multiple V-belt tensioning roll (plastic) fits: INFINITI Q50, Q60 3.0 09.15-

View part

FEBI BILSTEIN Multi V-belt pulley 196859

Multi V-belt pulley (metal) fits: HONDA CIVIC IX, CIVIC X, CIVIC XI 2.0 08.15-

View part

FEBI BILSTEIN Stabilizer link 19686

Stabilizer link front L/R 56mm fits: HONDA CIVIC V, CIVIC VI, CIVIC VII, CR-V I, CRX III 1.4-2.0D 03.92-09.05

View part

FEBI BILSTEIN Transmission mount 196861

Transmission mount rear L/R fits: LAND ROVER RANGE ROVER IV, RANGE ROVER SPORT I, RANGE ROVER SPORT II 2.7D-5.0 02.05-03.22

View part

FEBI BILSTEIN Leaf spring silent block 196862

Silentblock/spring bush rear L/R (160x31,6) fits: MAN F2000 01.94-

View part

FEBI BILSTEIN Leaf spring silent block 196863

Silentblock/spring bush rear (50x34) fits: DAF 75, CF 75, CF 85, XF 105, XF 106, XF II 01.92-

View part

FEBI BILSTEIN Engine mount 196864

Engine mount rear L/R (rubber-metal) fits: MAN TGS I, TGS II, TGX I, TGX II D1556LF07-D3876LF12 06.06-

View part

FEBI BILSTEIN Engine mount 196865

Engine mount rear L/R (rubber-metal) fits: MERCEDES ACTROS MP4 / MP5, ANTOS, AROCS 471.943-OM936.916 07.11-

View part

FEBI BILSTEIN Axle rubber boot set 196866

Joint rubber boot front/outside (fi: 24/70) (length99) fits: SUZUKI S-CROSS, SX4 S-CROSS, VITARA 1.0-1.6D 08.13-

View part

FEBI BILSTEIN Wheel hub nut 196867

Wheel hub nut (M85x2, wrench size 98mm, height 22mm, total diameter 115mm) fits: SCANIA 4, 4 BUS, F, G I, G II, K I, L, N BUS, P I, P II, R I, R II, S, T 05.95-

View part

FEBI BILSTEIN Wheel hub nut 196868

rear (M10 M45x1,5, wrench size 60mm, height 25mm) fits: MERCEDES ACTROS, ACTROS MP2 / MP3, ACTROS MP4 / MP5, ANTOS, AROCS, ATEGO, AXOR, AXOR 2, NG, SK 11.81-

View part

FEBI BILSTEIN Wheel hub nut 196869

Wheel hub nut (M95x2, wrench size 115mm, height 12mm) fits: SCANIA 3, 3 BUS, 4, G I, G II, L, P I, P II, R I, R II, S, T 05.87-

View part

FEBI BILSTEIN Radiator fan resistor 196871

Cooler fan resistor fits: AUDI A4 ALLROAD B8, A4 B8, A5, A6 ALLROAD C7, A6 C7, A7, Q3, Q5 1.4-3.2 06.07-10.18

View part

FEBI BILSTEIN Driver’s cab suspension metal sleeve 196872

Cab suspension metal bush L/R (16,5/30x29mm) fits: MAN TGA, TGS I, TGX I

View part

FEBI BILSTEIN Brake disc 196876

Brake disc front L/R fits: FORD PUMA 1.0H/1.5 11.20-

View part

FEBI BILSTEIN Leaf spring silent block 196877

Silentblock/spring bush (70x24,3) fits: MAN TGS I, TGS II, TGX II 06.06-

View part

FEBI BILSTEIN Driver's cab suspension repair kit 196878

Cab tilt repair kit fits: DAF 95, 95 XF, CF 85, XF 105, XF 95 09.87-

View part

FEBI BILSTEIN Driver's cab suspension repair kit 196879

Cab tilt repair kit fits: RVI C, D, D ACCESS, KERAX, PREMIUM 2 06.97-

View part

FEBI BILSTEIN Driver's cab suspension repair kit 196880

Cab tilt repair kit fits: RVI C, D, D ACCESS, KERAX, PREMIUM 2 06.97-

View part

Buying with Partios

Buying FEBI BILSTEIN parts through Partios

Are these genuine FEBI BILSTEIN parts?

Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FEBI BILSTEIN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.

Do you supply FEBI BILSTEIN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FEBI BILSTEIN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FEBI BILSTEIN order?

It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FEBI BILSTEIN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account