Partios Wholesale catalogue

Febi Bilstein Distributor | Parts

Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)

61,645 current catalogue lines

About the FEBI BILSTEIN range

The Febi Bilstein range at Partios is broad rather than specialised. It has 61,645 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 61,645 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

FEBI BILSTEIN Leaf spring silent block 18202

Silentblock/spring bush front/rear L/R (61x35,5) fits: IVECO EUROMOVER, EUROSTAR, EUROTECH MH, EUROTECH MP, EUROTECH MT, EUROTRAKKER, STRALIS I, STRALIS II, S-WAY, TRAKKER I, TRAKKER II, X-WAY 01.92-

View part

FEBI BILSTEIN Brake pad fitting kit 182020

Brake pad fitting kit rear rear fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, BERLINGO MULTISPACE, C5 III PEUGEOT 308 I, 407, 607, PARTNER 1.2-Electric 02.00-

View part

FEBI BILSTEIN Brake pad fitting kit 182021

Brake pad fitting kit rear rear fits: IVECO DAILY I, DAILY II, DAILY III RVI MASCOTT CITROEN JUMPER I, JUMPER II FIAT DUCATO FORD TRANSIT PEUGEOT BOXER 1.9D-3.0D 01.83-

View part

FEBI BILSTEIN Brake pad fitting kit 182022

Brake pad fitting kit rear front fits: ABARTH 500 / 595 / 695, 500C / 595C / 695C, GRANDE PUNTO, PUNTO, PUNTO EVO ALFA ROMEO 4C, 4C SPIDER, MITO OPEL CASCADA, CORSA D, CORSA E 1.0-2.0D 05.04-

View part

FEBI BILSTEIN Axle shaft 182023

Drive axle shaft front R 973mm fits: BMW X5 (E53), X5 (E70), X6 (E71, E72) 3.0-4.8 01.00-07.14

View part

FEBI BILSTEIN Axle shaft 182024

Drive axle shaft front L 616mm fits: FORD FIESTA V, FIESTA VI, FUSION 1.0-2.0 11.01-01.18

View part

FEBI BILSTEIN Brake pad fitting kit 182025

Brake pad fitting kit rear rear fits: BMW 5 (E60), 5 (E61), 6 (E63), 6 (E64), X5 (E70), X6 (E71, E72) 2.0-4.8 12.01-07.14

View part

FEBI BILSTEIN Clutch cable 182026

Clutch cable (716mm/432mm) fits: OPEL AGILA B 1.0-1.2LPG 04.08-03.15

View part

FEBI BILSTEIN Clutch cable 182027

Clutch cable (888mm/595mm) fits: CHEVROLET AVEO / KALOS DAEWOO KALOS 1.2-1.5 09.02-

View part

FEBI BILSTEIN Cross rod 182028

Cross rod (L-1690mm) fits: RVI D, D ACCESS, MIDLUM VOLVO FL, FL II, FL III 03.00-

View part

FEBI BILSTEIN Reaction bar 182029

Control rod rear L/R (L-608mm) fits: DAF CF, CF 75, CF 85, XF 106 01.01-

View part

FEBI BILSTEIN Wheel hub nut 18203

Wheel hub nut front (M60x2, wrench size 80mm, height 20mm) fits: SCANIA 3, 4, 4 BUS, G I, P I, R I, T 05.87-09.22

View part

FEBI BILSTEIN Wheel suspension track control arm, rear 182030

Rear axle track control arm L (top, rear, transverse, with bearing) fits: BMW X3 (G01), X3 (G01, F97, G08), X4 (G02, F98) 1.6-3.0H 08.17-

View part

FEBI BILSTEIN Wheel suspension track control arm, rear 182031

Rear axle track control arm R (top, rear, transverse, with bearing) fits: BMW X3 (G01), X3 (G01, F97, G08), X4 (G02, F98) 1.6-3.0H 08.17-

View part

FEBI BILSTEIN Wheel suspension track control arm, rear 182032

Rear axle track control arm L (bottom, rear, transverse, with bearing) fits: LAND ROVER DEFENDER, DISCOVERY V, RANGE ROVER IV 2.0-5.0 08.12-

View part

FEBI BILSTEIN Wheel suspension track control arm, rear 182033

Rear axle track control arm R (bottom, rear, transverse, with bearing) fits: LAND ROVER DEFENDER, DISCOVERY V, RANGE ROVER IV, RANGE ROVER SPORT II 2.0-5.0 08.12-

View part

FEBI BILSTEIN Brake shoe fitting kit 182034

Brake shoe fitting set fits: CITROEN NEMO, NEMO FURGON/NADWOZIE WIELKOPRZESTRZENNE FIAT 500L, DOBLO, DOBLO CARGO, DOBLO FURGON/NADWOZIE WIELKOPRZESTRZENNE 0.9-2.0LPG 06.02-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 182035

Front axle track control arm R transverse front 18 mm (with bearing) fits: NISSAN JUKE, LEAF, PULSAR 1.2-Electric 11.12-

View part

FEBI BILSTEIN Tie rod end 182036

Tie rod end L fits: HYUNDAI SONATA VII, TUCSON KIA OPTIMA, SORENTO III, SPORTAGE IV 1.6-3.5 09.14-

View part

FEBI BILSTEIN Reaction bar 182038

Control rod rear L/R (L-590mm) fits: DAF CF 85, XF 105, XF 106, XF II 10.05-

View part

FEBI BILSTEIN Brake shoe fitting kit 182039

Brake shoe fitting set (ATE) fits: BMW 1 (E81), 1 (E82), 1 (E88), 3 (E46), 3 (E90), 3 (E91), 3 (E92), 3 (E93), Z4 (E86) 1.6-3.0D 12.97-12.13

View part

FEBI BILSTEIN Wheel suspension track control arm, front 182040

Front axle track control arm R bottom front (with bearing) fits: DS DS 7 CITROEN C4 GRAND PICASSO II, C4 PICASSO II, C4 SPACETOURER, GRAND C4 SPACETOURER 1.2-2.0D 02.13-

View part

FEBI BILSTEIN Reaction bar 182041

Control rod bottom/rear L/R (L-602mm) fits: DAF CF, XF 105, XF 106, XF II, XG, XG+ 10.05-

View part

FEBI BILSTEIN Brake shoe fitting kit 182042

Brake shoe fitting set (ATE) fits: VOLVO S60 I, S60 II, S80 I, S80 II, V60 I, V70 II, V70 III, XC70 I, XC70 II 1.6-4.4 11.97-12.16

View part

FEBI BILSTEIN Cross rod 182043

Cross rod fits: SCANIA G II, L, P II, R II, S 09.16-

View part

FEBI BILSTEIN Center link 182045

Longitudinal steering rod (L-1385mm) fits: DAF CF, XF 105, XF 106, XF II 10.05-

View part

FEBI BILSTEIN Brake pad fitting kit 182047

Brake pad fitting kit rear front fits: LAND ROVER DISCOVERY I, DISCOVERY III, DISCOVERY IV, RANGE ROVER SPORT I 2.0-5.0 06.89-12.18

View part

FEBI BILSTEIN Disc brake caliper 182048

Disc brake caliper front L (new) fits: MAZDA CX-7, CX-9 2.2D-3.7 06.06-

View part

FEBI BILSTEIN Disc brake caliper 182049

Disc brake caliper front R (new) fits: MAZDA CX-7, CX-9 2.2D-3.7 06.06-

View part

FEBI BILSTEIN Center link 18205

Longitudinal steering rod (L-876mm) fits: DAF 65 CF, 75, 75 CF, 85 CF 01.92-

View part

FEBI BILSTEIN Disc brake caliper 182050

Disc brake caliper rear L (new) fits: MAZDA 6 2.0/2.2D/2.5 08.12-

View part

FEBI BILSTEIN Disc brake caliper 182051

Disc brake caliper rear R (new) fits: MAZDA 6 2.0/2.2D/2.5 08.12-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 182052

Front axle track control arm R bottom front (with bearing) fits: TOYOTA ALLION II, PREMIO, PRIUS 1.5-2.0 09.03-

View part

FEBI BILSTEIN Disc brake caliper 182053

Disc brake caliper rear L (new) fits: HYUNDAI IX35 KIA SPORTAGE III 1.6-2.0D 08.09-12.15

View part

FEBI BILSTEIN Disc brake caliper 182054

Disc brake caliper rear R (new) fits: HYUNDAI IX35 KIA SPORTAGE III 1.6-2.0D 08.09-12.15

View part

FEBI BILSTEIN Wheel suspension track control arm, front 182056

Front axle track control arm L bottom front (with bearing) fits: TOYOTA ALLION II, COROLLA, PREMIO, PRIUS 1.3-2.0 09.02-

View part

FEBI BILSTEIN Reaction bar 182057

Control rod rear (L-572mm) fits: MAN TGA, TGS I, TGX I, TGX II 04.00-

View part

FEBI BILSTEIN Stabilizer link 182058

Stabilizer link front L/R (L-284mm, thread size: M20x1,5) fits: SCANIA 2, 3 BUS, 4 BUS, F, K I, N BUS 01.81-

View part

FEBI BILSTEIN Stabilizer link 182059

Stabilizer link rear L/R (L-340mm, no sleeves) fits: MERCEDES ACTROS, ACTROS MP2 / MP3, AROCS, ATEGO, AXOR 2, ECONIC 04.96-

View part

FEBI BILSTEIN Brake pad fitting kit 182060

Brake pad fitting kit rear front fits: JAGUAR XJ 4.0 09.97-05.03

View part

FEBI BILSTEIN Brake shoe fitting kit 182061

Brake shoe fitting set fits: CITROEN JUMPER III FIAT DUCATO PEUGEOT BOXER 2.0D-3.0D 04.06-

View part

FEBI BILSTEIN Brake shoe fitting kit 182062

Brake shoe fitting set fits: FIAT 500, 500 C, PANDA 0.9-1.3D 09.03-

View part

FEBI BILSTEIN Brake shoe fitting kit 182063

Brake shoe fitting set fits: OPEL ASTRA F, ASTRA F CLASSIC, ASTRA G, ASTRA G CLASSIC, ASTRA H, ASTRA H GTC, COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, COMBO TOUR, VECTRA B, ZAFIRA A 1.2-2.0D 09.91-

View part

FEBI BILSTEIN Brake shoe fitting kit 182064

Brake shoe fitting set fits: CITROEN C2, C2 ENTERPRISE, C3 I, C3 II, C3 PLURIEL PEUGEOT 1007 1.1-1.6D 02.02-

View part

FEBI BILSTEIN Brake shoe fitting kit 182065

Brake shoe fitting set fits: FORD C-MAX, FOCUS I 1.4-2.0LPG 08.98-09.10

View part

FEBI BILSTEIN Tie rod (with no end) 182066

Tie rod (with no end) L/R (length: 196mm, with counter-nut) fits: BMW 5 (E39) 2.0-3.0D 09.95-05.04

View part

FEBI BILSTEIN Wheel suspension track control arm, rear 182067

Rear axle track control arm R (top, rear, transverse, with bearing) fits: ALFA ROMEO GIULIETTA 1.4-2.0D 04.10-12.20

View part

FEBI BILSTEIN Wheel suspension track control arm, rear 182068

Rear axle track control arm L/R (bottom, rear, transverse, with bearing) fits: ALFA ROMEO GIULIETTA 1.4-2.0D 04.10-12.20

View part

Buying with Partios

Buying FEBI BILSTEIN parts through Partios

Are these genuine FEBI BILSTEIN parts?

Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FEBI BILSTEIN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.

Do you supply FEBI BILSTEIN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FEBI BILSTEIN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FEBI BILSTEIN order?

It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FEBI BILSTEIN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account