Partios Wholesale catalogue

Febi Bilstein Distributor | Parts

Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)

61,645 current catalogue lines

About the FEBI BILSTEIN range

The Febi Bilstein range at Partios is broad rather than specialised. It has 61,645 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 61,645 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

FEBI BILSTEIN Reaction bar 179513

Control rod rear L/R (L-665mm, seargent) fits: IVECO STRALIS I, STRALIS II, S-WAY, TRAKKER I, T-WAY, X-WAY 03.06-

View part

FEBI BILSTEIN Center link 179514

Longitudinal steering rod (L-718mm) fits: RVI C, K VOLVO FM II, FM III, FMX II, FMX III 01.10-

View part

FEBI BILSTEIN Cross rod 179515

Cross rod (L-686mm) fits: VOLVO FH, FH II, FH III, FH16, FH16 II, FH16 III 01.03-

View part

FEBI BILSTEIN Center link 179516

Longitudinal steering rod (L-900mm) fits: RVI C, D, D ACCESS, K, T VOLVO FH, FH II, FH III, FH16, FH16 II, FH16 III, FM, FM II, FM III, FMX II, FMX III 01.03-

View part

FEBI BILSTEIN Timing set (chain+ elements) 179517

Timing set (chain + elements) fits: BMW 1 (F20), 1 (F21) MINI (R56), (R57), CLUBMAN (R55), CLUBVAN (R55), COUNTRYMAN (R60), PACEMAN (R61) 1.6D 05.09-05.19

View part

FEBI BILSTEIN Center link 179518

Longitudinal steering rod (L-680mm) fits: SETRA 200, 300, 400 01.73-

View part

FEBI BILSTEIN Oil pump drive assembly 179519

Oil pump drive assembly fits: VW BEETLE, JETTA IV, PASSAT B7 2.5 04.10-12.20

View part

FEBI BILSTEIN Brake pad wear sensor 17952

Brake pad wear sensor front fits: BMW 3 (E46) 2.5-3.2 10.99-12.07

View part

FEBI BILSTEIN Cooling system stub-pipe 179520

Cooling system stub-pipe fits: CHEVROLET AVEO OPEL ADAM, ASTRA J, ASTRA J GTC, CORSA D, CORSA E, MERIVA B 1.2-1.4LPG 09.09-

View part

FEBI BILSTEIN Water pump 179521

Water pump, with a gasket fits: FORD FOCUS IV, GALAXY III, GALAXY MK III, MONDEO V, S-MAX FORD USA EDGE 2.0D 01.18-

View part

FEBI BILSTEIN Water pump 179522

Water pump, with a gasket fits: DS DS 3 / DS 3, DS 4 II, DS 7 CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, C3 AIRCROSS II, C3 III, C4 CACTUS, C4 III 1.3D-2.3D 10.01-

View part

FEBI BILSTEIN Engine mount 179523

Engine mount front L, hydraulic fits: MERCEDES C T-MODEL (S205), C (W205) 1.6D 05.14-05.18

View part

FEBI BILSTEIN Multi-V belt tensioner 179524

Multi-V belt tensioner fits: HYUNDAI I20 ACTIVE, I20 II, I30 KIA CEE'D, PRO CEE'D, RIO IV, STONIC 1.0 04.15-

View part

FEBI BILSTEIN Spring cushion damper 179525

Suspension spring fender R fits: SCANIA 4, F, G I, G II, K I, L, P I, P II, R I, R II, S, T 05.95-

View part

FEBI BILSTEIN Tie rod end 179526

Tie rod end L/R fits: TESLA MODEL S, MODEL X Electric 09.12-04.26

View part

FEBI BILSTEIN Brake slack adjuster 179527

Brake slack adjuster fits: VOLVO B10, B58 01.78-

View part

FEBI BILSTEIN Tie rod end 179528

Tie rod end L/R fits: TESLA MODEL 3, MODEL Y Electric 01.17-

View part

FEBI BILSTEIN Transmission mount 179529

Transmission mount from gearbox side L fits: HYUNDAI I30, KONA KIA CEED, SELTOS 1.5-1.6DH 06.17-

View part

FEBI BILSTEIN Engine mount 17953

Engine mount front R, hydraulic fits: MERCEDES E T-MODEL (S210), E (W210), S (C215), S (C216), S (W220, V220) 3.2D/5.0/5.5 03.99-12.13

View part

FEBI BILSTEIN Transmission mount 179530

Transmission mount inside L fits: HYUNDAI I10 I 1.0-1.2LPG 12.07-05.18

View part

FEBI BILSTEIN Stabilizer bar bushing 179531

Stabilizer bar bushing front L/R (24,8mm) fits: SUZUKI GRAND VITARA I, GRAND VITARA II 1.6-3.2 04.03-

View part

FEBI BILSTEIN Oil radiator 179532

Oil cooler fits: MERCEDES ACTROS MP4 / MP5, ANTOS, AROCS, ATEGO 3, CITARO 2, ECONIC 2, INTEGRO (O 550), INTOURO, TOURISMO (O 350), UNIMOG SETRA 400 M936.991-OM936.980 07.11-

View part

FEBI BILSTEIN Shock absorber assembly kit 179533

Shock absorber assembly kit front fits: PORSCHE 911, 911 SPEEDSTER, BOXSTER, BOXSTER SPYDER, CAYMAN 2.5-3.8 09.96-06.13

View part

FEBI BILSTEIN Additional water pump 179535

Additional water pump (operation mode electric) fits: AUDI A3, A4 B6, A4 B7, TT FERRARI 360, 360 SPIDER, 458, 458 SPIDER, 599 GTB/GTO, 612 SCAGLIETTI, CALIFORNIA, ENZO FERRARI 1.6-6.3 09.93-

View part

FEBI BILSTEIN Water pump pulley 179536

Water pump pulley (outer diameter: 155mm) fits: RVI C, K, T VOLVO FH, FH II, FM, FM II, FMX, FMX II, FMX III D13A360-DXi13520 09.05-

View part

FEBI BILSTEIN Oil dipstick 179537

Oil dipstick fits: NISSAN PRIMASTAR OPEL VIVARO A RENAULT CLIO II, ESPACE III, ESPACE IV, GRAND SCENIC II, GRAND SCENIC III, KANGOO, KANGOO EXPRESS, LAGUNA I, LAGUNA II, MASTER II 1.9D 03.97-

View part

FEBI BILSTEIN Additional water pump 179538

Additional water pump (operation mode electric) fits: DS DS 3, DS 4, DS 4 II, DS 5, DS 7, DS 9 CITROEN C4, C4 GRAND PICASSO I, C4 GRAND PICASSO II, C4 I, C4 II, C4 PICASSO I 1.6/1.6H 02.06-

View part

FEBI BILSTEIN AdBlue tank cap 179539

AdBlue tank cap fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, BERLINGO MULTISPACE, C3 PICASSO, C4 PICASSO I, C4 SPACETOURER, C5 III, C-ELYSEE, DS3, JUMPY III 1.3D-3.0D 10.06-

View part

FEBI BILSTEIN Engine mount 17954

Engine mount front L/R, hydraulic fits: MERCEDES CLS (C219), E T-MODEL (S210), E T-MODEL (S211), E (W210), E (W211), S (C215), S (W220, V220), SL (R230) 3.2D-5.5 07.99-01.12

View part

FEBI BILSTEIN Oil sump drain hole bolt gasket/seal 179540

Sump drain hole bolt seal (12x18x1,5) fits: AUDI Q7 PORSCHE CAYENNE, PANAMERA VW TOUAREG 2.9-4.8 03.06-05.23

View part

FEBI BILSTEIN Lambda sensor 179541

Lambda probe (number of wires 4, 440mm) fits: MITSUBISHI CARISMA, SPACE STAR 1.8 07.95-06.06

View part

FEBI BILSTEIN Lambda sensor 179543

Lambda probe (number of wires 4, 350mm) fits: MITSUBISHI CARISMA, SPACE STAR 1.3/1.6/1.8 05.95-06.06

View part

FEBI BILSTEIN Air compressor 179544

Compressor, type of cooling: liquid coolant fits: RVI KERAX, MAGNUM, PREMIUM 2, T DTI11-DXi7

View part

FEBI BILSTEIN Lambda sensor 179545

Lambda probe (number of wires 4, 710mm) fits: MITSUBISHI ASX, LANCER VIII 1.5/1.6/1.6LPG 06.08-

View part

FEBI BILSTEIN Engine mount 179546

Engine mount front R, rubber-metal fits: CHEVROLET SPARK 1.0/1.0LPG/1.2 03.10-

View part

FEBI BILSTEIN Engine mount 179547

Engine mount R, rubber-metal fits: KIA SOUL II 1.6/1.6LPG/2.0 02.14-12.18

View part

FEBI BILSTEIN Compressor head 179548

Compressor cylinder head fits: RVI KERAX 330.18/330.26/330.32/370.18/370.26/370.32/380.18/380.19/380.26/380.32/380.33/380.35/380.40/380.42/380P LOW/380P, 380P LOW/380T LOW, 380T TAG/380T PUS/380T, 380

View part

FEBI BILSTEIN Compressor head 179549

Compressor cylinder head fits: RVI KERAX 330.18/330.26/330.32/370.18/370.26/370.32/380.18/380.19/380.26/380.32/380.33/380.35/380.40/380.42/380P LOW/380P, 380P LOW/380T LOW, 380T TAG/380T PUS/380T, 380

View part

FEBI BILSTEIN Compressor head 179550

Compressor cylinder head (set) fits: RVI KERAX 330.18/330.26/330.32/370.18/370.26/370.32/380.18/380.19/380.26/380.32/380.33/380.35/380.40/380.42/380P LOW/380P, 380P LOW/380T LOW, 380T TAG/380T PUS/380

View part

FEBI BILSTEIN Compressor gasket set 179551

Compressor gasket set fits: RVI KERAX 330.18/330.26/330.32/370.18/370.26/370.32/380.18/380.19/380.26/380.32/380.33/380.35/380.40/380.42/380P LOW/380P, 380P LOW/380T LOW, 380T TAG/380T PUS/380T, 380T L

View part

FEBI BILSTEIN Compressor repair kit 179552

View part

FEBI BILSTEIN AdBlue tank cap 179553

AdBlue tank cap fits: DS DS 3, DS 3 / DS 3, DS 4, DS 4 II, DS 5 CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, BERLINGO MULTISPACE, C3 II, C3 PICASSO, C4 CACTUS 1.4D-3.0D 02.08-

View part

FEBI BILSTEIN Fuel filter 179554

Fuel filter (with a sealing ring) fits: FORD RANGER 2.0D 09.18-

View part

FEBI BILSTEIN Lambda sensor 179555

Lambda probe (number of wires 4, 200mm) fits: DAIHATSU COPEN, CUORE VI, SIRION, TREVIS, YRV 0.7/1.0 04.98-

View part

FEBI BILSTEIN Water pump 179556

Water pump, with a gasket fits: FORD TRANSIT CUSTOM V362, TRANSIT V363 RENAULT KANGOO, KANGOO EXPRESS, SCENIC II 1.5D/2.0D/2.0DH 07.02-

View part

FEBI BILSTEIN Lambda sensor 179558

Lambda probe (number of wires 4, 400mm) fits: CHEVROLET AVEO / KALOS, LACETTI, NUBIRA DAEWOO KALOS, LACETTI, NUBIRA KIA CARENS I 1.2/1.4/1.6 07.02-

View part

FEBI BILSTEIN Lambda sensor 179559

Lambda probe (number of wires 4, 400mm) fits: CHEVROLET AVEO / KALOS, SPARK 1.0-1.2LPG 06.06-

View part

FEBI BILSTEIN Timing belt support roller/pulley 17956

Timing belt support roller/pulley fits: LAND ROVER DEFENDER, DISCOVERY I 2.5D 10.89-12.98

View part

Buying with Partios

Buying FEBI BILSTEIN parts through Partios

Are these genuine FEBI BILSTEIN parts?

Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FEBI BILSTEIN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.

Do you supply FEBI BILSTEIN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FEBI BILSTEIN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FEBI BILSTEIN order?

It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FEBI BILSTEIN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account