Partios Wholesale catalogue

Febi Bilstein Distributor | Parts

Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)

61,645 current catalogue lines

About the FEBI BILSTEIN range

The Febi Bilstein range at Partios is broad rather than specialised. It has 61,645 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 61,645 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

FEBI BILSTEIN Cylinder head gasket 17716

Cylinder head gasket (thickness: 1,3mm) fits: DAEWOO KALOS, LANOS, LUBLIN II OPEL ASCONA C, ASTRA F, ASTRA G, CORSA A, KADETT E, KADETT E COMBO, VECTRA A, VECTRA B 1.5-2.4D 09.84-

View part

FEBI BILSTEIN Air suspension bellows 177160

Air suspension bellows (diameter: 160mm)

View part

FEBI BILSTEIN Air suspension bellows 177161

Air suspension bellows front (diameter: 195/228mm) fits: IVECO EUROSTAR, EUROTECH MH, EUROTECH MP, EUROTECH MT, STRALIS I, STRALIS II, S-WAY 01.92-

View part

FEBI BILSTEIN Air suspension bellows 177162

Air suspension bellows front (diameter: 130/228mm) fits: IVECO S-WAY, X-WAY 07.19-

View part

FEBI BILSTEIN Air suspension bellows 177163

Air suspension bellows rear (diameter: 130/228mm) fits: IVECO EUROSTAR, EUROTECH MP, EUROTECH MT, STRALIS I, STRALIS II, S-WAY, X-WAY 01.92-

View part

FEBI BILSTEIN Steering gear hydraulic pump 177164

Hydraulic pump, power steering fits: DAF CF 75, CF 85, XF 95 01.01-12.20

View part

FEBI BILSTEIN Multi-V-belt set (with tensioner) 177165

Multi-V-belt set with tensioner fits: DACIA DOKKER, DOKKER FURGON/NADWOZIE WIELKOPRZESTRZENNE, DUSTER, LODGY, LOGAN II, LOGAN MCV II, SANDERO II NISSAN NV250 RENAULT CAPTUR II, CLIO V 1.5D 10.12-

View part

FEBI BILSTEIN Valve guide 177166

Valve guide (suction, intake) fits: RVI MAGNUM Mack-EE9-560-MIDR06.35.40P/41 10.92-

View part

FEBI BILSTEIN Fuel filter 177167

Fuel filter fits: BMW 2 (G42, G87), 3 (G20, G80, G28), 3 (G21), 3 (G21, G81), 4 (G22, G82), 4 (G23, G83), 4 GRAN COUPE (G26), 5 (G30, F90), 5 (G31), 6 GRAN TURISMO (G32), 7 (G11 2.0D-3.0DH 07.15-

View part

FEBI BILSTEIN Air suspension bellows 177168

Air suspension bellows L (diameter: 200/259mm) fits: MERCEDES ACTROS MP4 / MP5, ANTOS, AROCS 07.11-

View part

FEBI BILSTEIN Air suspension bellows 177169

Air suspension bellows rear R (side locating pin, plastic base, with base, diameter: 200/259mm) fits: MERCEDES ACTROS MP4 / MP5, ANTOS, AROCS 07.11-

View part

FEBI BILSTEIN Air suspension bellows 177170

Air suspension bellows rear (diameter: 200/258mm, plastic base, with base) fits: MERCEDES ACTROS MP4 / MP5, ANTOS, AROCS 07.11-

View part

FEBI BILSTEIN Window washer reservoir 177171

Washer tank (with cover) fits: DS DS 3 / DS 3 OPEL CORSA F PEUGEOT 2008 II, 208, 208 I, 208 II 03.14-

View part

FEBI BILSTEIN Air filter 177173

Air filter (Cartridge) fits: JEEP CHEROKEE 2.0 09.18-

View part

FEBI BILSTEIN Oil filter 177174

Oil filter fits: BMW 5 (E60), 5 (E61), 6 (E63), 6 (E64) 5.0 09.04-12.10

View part

FEBI BILSTEIN Handbrake cable 177177

Handbrake cable front L/R (320mm) fits: VOLVO S60 I, S80 I, V70 II, XC70 I 2.0-3.0 11.97-04.10

View part

FEBI BILSTEIN Handbrake cable 177178

Handbrake cable rear L/R (1833mm/1549mm) fits: FIAT DOBLO, DOBLO CARGO OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, COMBO TOUR 1.3D-2.0D 01.10-

View part

FEBI BILSTEIN Handbrake cable 177179

Handbrake cable rear R (1435mm/1166mm) fits: FIAT PANDA 0.9-1.3D 02.12-

View part

FEBI BILSTEIN Cylinder head gasket 17718

Cylinder head gasket (thickness: 1,3mm) fits: OPEL CORSA B 1.2 03.93-09.00

View part

FEBI BILSTEIN EGR valve 177180

EGR valve fits: SUZUKI GRAND VITARA II, JIMNY, LIANA, SWIFT III, SX4 1.3-2.0 02.01-

View part

FEBI BILSTEIN MacPherson strut mount 177181

MacPherson strut mount front L/R (with a bearing) fits: HYUNDAI ACCENT V, SOLARIS, VENUE KIA RIO IV 1.0-1.6 01.17-

View part

FEBI BILSTEIN MacPherson strut mount 177182

MacPherson strut mount front L/R (with a bearing) fits: HYUNDAI TUCSON KIA SPORTAGE IV 1.6-2.4 06.15-

View part

FEBI BILSTEIN MacPherson strut mount 177183

MacPherson strut mount front L/R (with a bearing) fits: HYUNDAI GRAND SANTA FÉ, SANTA FÉ III KIA SORENTO II 2.0D-3.5 06.09-12.18

View part

FEBI BILSTEIN Engine valve 177184

Intake valve (46x7x164mm) fits: DAF 85 CF, 95 XF VF390M-XF355M 01.97-09.02

View part

FEBI BILSTEIN Brake pad set 177185

Brake pads set rear , fits: MERCEDES A (V177), A (W177), B SPORTS TOURER (W247), CLA (C118), CLA SHOOTING BRAKE (X118), EQA (H243), EQB (X243), GLA (H247), GLB (X247) 1.3-Electric 03.18-

View part

FEBI BILSTEIN Brake pad set 177186

Brake pads set front , fits: AUDI Q5 2.0-3.0DH 06.16-

View part

FEBI BILSTEIN Shock absorber bumper 177188

Shock absorber bumper front L/R (height 67mm) fits: FORD ECOSPORT, FIESTA VI 1.0-2.0 08.12-12.22

View part

FEBI BILSTEIN Gas spring 177189

Gas spring trunk lid L/R max length: 389mm, stroke:97mm fits: BMW 3 (E92), 3 (E93) COUPE/KABRIOLET 03.07-10.13

View part

FEBI BILSTEIN Clutch release bearing 177190

Clutch thrust bearing fits: MERCEDES ACTROS MP4 / MP5, ANTOS, AROCS, ATEGO 2, ATEGO 3 10.04-

View part

FEBI BILSTEIN Clutch master cylinder 177191

Clutch master cylinder fits: CITROEN C5 III PEUGEOT 508, 508 I 1.6-2.2D 02.08-12.18

View part

FEBI BILSTEIN Rear suspension beam silent block 177192

Rear suspension beam silent block (in the front) L/R fits: VOLVO S60 III, S90 II, V60 II, V90 II, XC60 II, XC90 II POLESTAR POLESTAR 1 2.0-2.0H 09.14-

View part

FEBI BILSTEIN Rear suspension beam silent block 177193

Rear suspension beam silent block (Outer in the back) L/R fits: VOLVO S60 III, S90 II, V60 II, V90 II, XC60 II, XC90 II POLESTAR POLESTAR 1 2.0-2.0H 09.14-

View part

FEBI BILSTEIN ABS sensor 177194

ABS sensor front R fits: HYUNDAI IX20 KIA VENGA 1.4-1.6LPG 02.10-

View part

FEBI BILSTEIN Stabilizer bar bushing 177201

Stabilizer bar bushing front bottom/top L/R (19mm) fits: PORSCHE PANAMERA 3.0-4.8 07.09-10.16

View part

FEBI BILSTEIN Pneumatic clutch bearing 177202

Hydraulic concentric bearing fits: FIAT DUCATO 2.3D 07.06-

View part

FEBI BILSTEIN Pneumatic clutch bearing 177203

Hydraulic concentric bearing fits: ABARTH 500 / 595 / 695, 500C / 595C / 695C ALFA ROMEO MITO FIAT 500, 500 C, 500L, DOBLO, DOBLO CARGO, GRANDE PUNTO, LINEA, PANDA, PUNTO 1.2-1.6D 05.07-

View part

FEBI BILSTEIN MacPherson strut mount 177204

MacPherson strut mount rear R fits: BMW 1 (F40), 2 (F45), 2 GRAN COUPE (F44), 2 GRAN TOURER (F46), 2 GRAN TOURER VAN (F46), X1 (F48), X2 (F39) MINI (F55), (F56), (F57) 1.2-2.0D 09.13-

View part

FEBI BILSTEIN Stabilizer bar bushing 177205

Stabilizer bar bushing front bottom/top L/R (21mm) fits: PORSCHE PANAMERA 3.0D/3.0H/4.8 09.09-07.13

View part

FEBI BILSTEIN Front track control arm silent block 177206

Front track control arm silent block L/R (18,1x69,1x69 mm) fits: KIA SORENTO I 2.5D/3.3 08.02-12.11

View part

FEBI BILSTEIN Radiator fan coupling 177208

Fan clutch (with fan, number of blades: 11) fits: SCANIA R II, S DC13.139-DC16.118 09.16-

View part

FEBI BILSTEIN MacPherson strut mount 177209

MacPherson strut mount front L/R (with a bearing) fits: HYUNDAI SANTA FÉ II KIA SORENTO II 2.0D-3.5 11.05-12.15

View part

FEBI BILSTEIN Cylinder head gasket 17721

Cylinder head gasket (thickness: 1,3mm) fits: OPEL ASCONA C, ASTRA F, CALIBRA A, FRONTERA A SPORT, KADETT E, OMEGA A, OMEGA B, VECTRA A, VECTRA B 1.6/2.0 09.86-07.03

View part

FEBI BILSTEIN Variable timing phazes pulley 177210

Camshaft phasing pulley fits: TOYOTA PLATZ, YARIS 1.0/1.3 04.99-12.12

View part

FEBI BILSTEIN MacPherson strut mount 177211

MacPherson strut mount front L/R (with a bearing) fits: HYUNDAI ELANTRA IV, I30 KIA CEE'D, PRO CEE'D 1.4-2.0LPG 11.05-12.12

View part

FEBI BILSTEIN MacPherson strut mount 177212

MacPherson strut mount front L/R (with a bearing) fits: KIA SORENTO III 2.0D-3.5 01.15-12.20

View part

FEBI BILSTEIN MacPherson strut mount 177213

MacPherson strut mount front L/R (with a bearing) fits: HYUNDAI GRANDEUR, IX35 KIA OPTIMA, SPORTAGE III 1.6-3.0LPG 08.09-12.17

View part

FEBI BILSTEIN MacPherson strut mount 177214

MacPherson strut mount front L (with a bearing) fits: NISSAN QASHQAI +2, QASHQAI I 1.5D-2.0D 11.06-07.14

View part

FEBI BILSTEIN ABS sensor 177215

ABS sensor front L/R fits: BMW 2 (F45), 2 GRAN TOURER (F46), 2 GRAN TOURER VAN (F46), X1 (F48), X2 (F39) MINI CLUBMAN (F54), COUNTRYMAN (F60) 1.5-2.0D 11.13-

View part

Buying with Partios

Buying FEBI BILSTEIN parts through Partios

Are these genuine FEBI BILSTEIN parts?

Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FEBI BILSTEIN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.

Do you supply FEBI BILSTEIN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FEBI BILSTEIN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FEBI BILSTEIN order?

It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FEBI BILSTEIN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account