Partios Wholesale catalogue

Febi Bilstein Distributor | Parts

Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)

61,645 current catalogue lines

About the FEBI BILSTEIN range

The Febi Bilstein range at Partios is broad rather than specialised. It has 61,645 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 61,645 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

FEBI BILSTEIN Water pump 12846

Water pump fits: MERCEDES UNIMOG OM352.903-OM353.980 05.69-

View part

FEBI BILSTEIN Steering centre link 12851

Steering centre link L/R (605mm) fits: OPEL OMEGA B 2.0-3.2 03.94-07.03

View part

FEBI BILSTEIN Engine valve 12856

Intake valve (40x6,97x102,5) fits: BMW 3 (E21), 3 (E30), 5 (E12), 5 (E28), 5 (E34) 2.0/2.3/2.7 06.75-11.93

View part

FEBI BILSTEIN Engine valve 12857

Exhaust valve (34x6,96x102,5) fits: BMW 3 (E21), 3 (E30), 5 (E12), 5 (E28), 5 (E34) 2.0/2.3/2.7 06.75-11.93

View part

FEBI BILSTEIN Engine valve 12858

Intake valve (42x6,97)

View part

FEBI BILSTEIN Engine valve 12859

Exhaust valve (36x6,96) fits: BMW 3 (E30), 5 (E28), 5 (E34), Z1 2.5/2.7 09.81-11.93

View part

FEBI BILSTEIN Engine valve 12860

Intake valve (33x6,97) fits: BMW 3 (E30), 3 (E36), 5 (E34) 1.8/2.5 09.89-07.96

View part

FEBI BILSTEIN Engine valve 12861

Exhaust valve (30,05x6,96) fits: BMW 3 (E30), 3 (E36), 5 (E34) 1.8/2.5 09.89-07.96

View part

FEBI BILSTEIN Bolts, nuts and pins 12862

3144020071 Febi Wheel bolt M18x1, 5x60mm DB

View part

FEBI BILSTEIN Bolts, nuts and pins 12863

Wheel bolt front/rear M18x1,5 x63/73mm (thread length 31mm, Galvanized / Steel) quantity per packaging:20pcs fits: MERCEDES ATEGO, ATEGO 2, LK/LN2, UNIMOG, T2/LN1, VARIO, VARIO (B667, B670 01.84-

View part

FEBI BILSTEIN Bolts, nuts and pins 12865

Wheel bolt front/rear M20x1,5 x77/85mm (thread length 37mm, Galvanized / Steel) fits: MERCEDES ATEGO, ATEGO 2, LK/LN2, O 301, O 402, OF, T2/L, TOURINO (O 510), TRAVEGO (O 580) 01.72-

View part

FEBI BILSTEIN Bolts, nuts and pins 12868

Wheel bolt front/rear M22x1,5 x80/91mm (thread length 39mm, Galvanized / Steel) fits: MAN LION ́S STAR, TGS I MERCEDES ACTROS, ACTROS MP2 / MP3, ATEGO, AXOR, AXOR 2, CONECTO (O 345), LK/LN2, MK, NG

View part

FEBI BILSTEIN Bolts, nuts and pins 12869

Febi 3814011271S2 wheel pin M22x1, 5x85mm DB

View part

FEBI BILSTEIN Bolts, nuts and pins 12871

Wheel bolt rear M22x1,5 x98/109mm (thread length 40mm, Galvanized / Steel) fits: MAN E2000, F2000, F8, F90, LION ́S STAR MERCEDES ACTROS, ACTROS MP2 / MP3, ATEGO, AXOR, AXOR 2, LK/LN2, MK, NG 01.59-

View part

FEBI BILSTEIN Bolts, nuts and pins 12873

Wheel bolt rear M22x1,5 x110/121mm (thread length 40mm, Galvanized / Steel) fits: MAN CLA, E2000, EM, F2000, F8, F90, F90 UNTERFLUR, FOC, HOCL, L2000, LION ́S CITY, LION ́S CLASSIC, M 2000 L 01.59-

View part

FEBI BILSTEIN Bolts, nuts and pins 12874

3814010871 Febi Wheel T pin M22x1, 5x98mm

View part

FEBI BILSTEIN Bolts, nuts and pins 12875

Wheel bolt rear M22x1,5 x125/135mm (thread length 39mm, Galvanized / Steel) fits: MERCEDES ACTROS, ACTROS MP2 / MP3, ACTROS MP4 / MP5, ANTOS, AROCS, ATEGO, ATEGO 2, ATEGO 3, AXOR, AXOR 2 01.59-

View part

FEBI BILSTEIN Cylinder head gasket 12878

Cylinder head gasket (thickness: 1,74mm) fits: BMW 3 (E30), 3 (E36), 3 (E46), 5 (E34), Z3 (E36) 1.6/1.6CNG/1.8 06.87-07.06

View part

FEBI BILSTEIN Cylinder head gasket 12879

Cylinder head gasket (thickness: 2,05mm) fits: BMW 3 (E30), 3 (E36) 1.8 09.89-12.95

View part

FEBI BILSTEIN Cylinder head gasket 12881

Cylinder head gasket (thickness: 1,88mm) fits: BMW 3 (E21), 3 (E30), 5 (E12), 5 (E28), 5 (E34) 2.0/2.3 03.77-11.93

View part

FEBI BILSTEIN Cylinder head gasket 12885

Cylinder head gasket (thickness: 1,74mm) fits: BMW 3 (E36), 5 (E34), 5 (E39) 2.0 04.90-06.03

View part

FEBI BILSTEIN Cylinder head gasket 12889

Cylinder head gasket (thickness: 1,75mm) fits: BMW 3 (E36), 5 (E34), 5 (E39), 7 (E38), Z3 (E36) 2.5/2.8 03.90-11.01

View part

FEBI BILSTEIN Shock absorber bumper 12895

Shock absorber bumper front L/R (height 95mm) fits: VOLVO 740, 760, 940, 940 II, 960, 960 II 2.0-2.9 08.81-10.98

View part

FEBI BILSTEIN Cylinder head gasket 12896

Cylinder head gasket (thickness: 1,87mm) fits: BMW 3 (E36), 5 (E34), 5 (E39), 7 (E38) LAND ROVER RANGE ROVER II OPEL OMEGA B 2.5D 09.91-05.04

View part

FEBI BILSTEIN Complete engine gasket set (upper) 12899

Complete engine gasket set (up) fits: BMW 5 (E34), 6 (E24), 7 (E32) 3.4/3.5 12.77-02.93

View part

FEBI BILSTEIN Cylinder head gasket 12900

Cylinder head gasket (thickness: 1,9mm) fits: BMW 5 (E34), 6 (E24), 7 (E32) SEAT IBIZA I 1.2/3.4/3.5 12.77-05.93

View part

FEBI BILSTEIN Lights switch 12902

Light switch reversing fits: AUDI 100 C4, 80 B4, A4 B5, A4 B6, A6 C4, A6 C5, A8 D2, ALLROAD C5, COUPE B3, V8 CITROEN AX, BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, C15 02.83-

View part

FEBI BILSTEIN Steering gear arm 12903

Steering gear arm fits: BMW 5 (E39), 7 (E38) 2.5D-5.4 03.94-12.03

View part

FEBI BILSTEIN Tie rod end 12904

Tie rod end L/R fits: MAZDA 121 II, 323 C IV, 323 C V, 323 F IV, 323 F V, 323 III, 323 P V, 323 S IV, 323 S V, DEMIO, MX-3, RX-7 III 1.3-2.0D 01.87-07.03

View part

FEBI BILSTEIN Tie rod end 12905

Tie rod end L/R fits: FORD USA PROBE II MAZDA 323 F VI, 323 S VI, 5, 626 III, 626 IV, 626 V, E, MPV II, MX-6, PREMACY, XEDOS 6 1.3-3.0 11.87-05.10

View part

FEBI BILSTEIN Tie rod (with no end) 12906

Tie rod (with no end) L/R (length: 324mm, with counter-nut) fits: MAZDA 323 C IV, 323 F IV, 323 III, 323 S IV 1.3-1.8 06.89-10.96

View part

FEBI BILSTEIN Tie rod (with no end) 12907

Tie rod (with no end) L/R (length: 340mm, with counter-nut) fits: MAZDA 323 C IV, 323 F IV, 323 III, 323 S IV 1.3-1.8 06.89-10.96

View part

FEBI BILSTEIN Wheel suspension track control arm, front 12908

Front axle track control arm R bottom front 18 mm fits: FORD USA PROBE II MAZDA 626 IV, MX-6 1.8-2.5 08.91-03.98

View part

FEBI BILSTEIN Wheel suspension track control arm, front 12909

Front axle track control arm L bottom front 18 mm fits: FORD USA PROBE II MAZDA 626 IV, MX-6 1.8-2.5 08.91-03.98

View part

FEBI BILSTEIN Tie rod (with no end) 12910

Tie rod (with no end) L/R (length: 270mm) fits: TOYOTA STARLET 1.0/1.3 10.84-12.89

View part

FEBI BILSTEIN Tie rod (with no end) 12911

Febi steering rack 45503-29385 Toyota (Corolla,)

View part

FEBI BILSTEIN Tie rod end 12913

Tie rod end L/R fits: TOYOTA CAMRY, CARINA IV, CELICA, COROLLA, COROLLA FX, RAV 4 I, VIOS / SOLUNA VIOS, YARIS 1.0-2.5 05.83-06.20

View part

FEBI BILSTEIN Wheel suspension track control arm, front 12925

Front axle track control arm L bottom front fits: ROVER 200, 200 II, 400, 400 II, COUPE 1.4-2.0D 01.90-03.00

View part

FEBI BILSTEIN Wheel suspension track control arm, front 12926

Front axle track control arm R bottom front fits: ROVER 200, 200 II, 25 I, 400, 400 II, COUPE 1.1-2.0D 10.89-05.05

View part

FEBI BILSTEIN Front track control arm silent block 12927

Front track control arm silent block in the front L/R (10x22/32x50 mm) fits: ROVER 200 II, 400 II 1.4-2.0D 01.90-03.00

View part

FEBI BILSTEIN Wheel suspension track control arm, front 12932

Front axle track control arm L bottom front fits: TOYOTA COROLLA 1.3-2.0D 05.92-04.97

View part

FEBI BILSTEIN Front ball joint 12933

Axle ball joint L/R (bottom front) (cone diameter 15mm, with extra materials) fits: TOYOTA AVENSIS, AVENSIS VERSO, CARINA E VI, CELICA, COROLLA, PICNIC 1.3-2.2D 04.92-11.09

View part

FEBI BILSTEIN Wheel bearing kit 12934

Wheel bearing kit rear L/R (19x40x15) fits: AUDI 50, 80 B1, 80 B2, 80 B3, 90 B2, 90 B3, COUPE B2 SEAT AROSA, CORDOBA, CORDOBA VARIO, IBIZA II, TOLEDO I VW CORRADO 0.8-Electric 05.72-06.04

View part

FEBI BILSTEIN Front ball joint 12935

Axle ball joint L/R (bottom front) (cone diameter 14mm, with extra materials) fits: TOYOTA STARLET 1.0 10.84-12.89

View part

FEBI BILSTEIN Tie rod end 12937

Tie rod end L/R fits: SUZUKI BALENO, IGNIS I, LIANA, SWIFT II, WAGON R+ 1.0-1.9D 10.89-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 12938

Front axle track control arm L/R bottom front 15 mm fits: SUZUKI SWIFT I 1.0/1.3 10.83-03.89

View part

FEBI BILSTEIN Steering centre link 12939

Steering centre link R (619mm) fits: SUZUKI VITARA, X-90 1.6-2.5 07.88-12.05

View part

FEBI BILSTEIN Tie rod end 12940

Tie rod end L/R fits: SUZUKI SAMURAI, VITARA 1.3-2.5 07.88-12.04

View part

Buying with Partios

Buying FEBI BILSTEIN parts through Partios

Are these genuine FEBI BILSTEIN parts?

Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FEBI BILSTEIN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.

Do you supply FEBI BILSTEIN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FEBI BILSTEIN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FEBI BILSTEIN order?

It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FEBI BILSTEIN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account