Partios Wholesale catalogue

Febi Bilstein Distributor | Parts

Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)

61,645 current catalogue lines

About the FEBI BILSTEIN range

The Febi Bilstein range at Partios is broad rather than specialised. It has 61,645 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 61,645 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

FEBI BILSTEIN Tie rod end 11960

Tie rod end R fits: MERCEDES E T-MODEL (S210), E (VF210), E (W210) 2.0-5.4 06.95-03.03

View part

FEBI BILSTEIN Brake disc 11962

Brake disc rear L/R (377mmx45mm) fits: MERCEDES ATEGO, ATEGO 2 01.98-

View part

FEBI BILSTEIN Radiator fan thermostatic switch-on 11964

Cooler fan thermoswitch (2, black, 87 92) fits: IVECO DAILY I, DAILY II FIAT BRAVA, BRAVO I, COUPE, FIORINO, FIORINO FURGON/NADWOZIE WIELKOPRZESTRZENNE, MAREA, PALIO, PANDA 08NCA-A112B1.054 10.80-

View part

FEBI BILSTEIN Radiator fan thermostatic switch-off 11965

Radiator fan thermostatic switch (with a sealing ring) fits: FIAT BRAVA, BRAVO I, MAREA, PUNTO LANCIA Y 1.1-2.4D 09.93-09.03

View part

FEBI BILSTEIN MacPherson strut mount 11970

MacPherson strut mount front L fits: CITROEN C8, EVASION, JUMPY I, JUMPY II FIAT SCUDO, ULYSSE LANCIA PHEDRA, ZETA PEUGEOT 806, 807, EXPERT, EXPERT TEPEE TOYOTA PROACE 1.6-3.0 06.94-

View part

FEBI BILSTEIN MacPherson strut mount 11971

MacPherson strut mount front R fits: CITROEN C8, EVASION, JUMPY I, JUMPY II FIAT SCUDO, ULYSSE LANCIA PHEDRA, ZETA PEUGEOT 806, 807, EXPERT, EXPERT TEPEE TOYOTA PROACE 1.6-3.0 06.94-

View part

FEBI BILSTEIN MacPherson strut mount 11972

MacPherson strut mount front R (with a bearing) fits: CITROEN C8, EVASION, JUMPY I, JUMPY II FIAT SCUDO, ULYSSE LANCIA PHEDRA, ZETA PEUGEOT 806, 807, EXPERT 1.6-3.0 06.94-

View part

FEBI BILSTEIN MacPherson strut mount 11973

MacPherson strut mount front L (with a bearing) fits: CITROEN C8, EVASION, JUMPY I, JUMPY II FIAT SCUDO, ULYSSE LANCIA PHEDRA, ZETA PEUGEOT 806, 807, EXPERT 1.6-3.0 06.94-

View part

FEBI BILSTEIN Pushrod 11975

Valve tappet mechanical (diameter: 22,2/28mm)

View part

FEBI BILSTEIN Cooling system rubber hose 11976

Cooling system rubber hose bottom (24/35mm) fits: MERCEDES 124 (C124), 124 T-MODEL (S124), 124 (W124) 2.0/2.3 01.85-06.93

View part

FEBI BILSTEIN Wheel suspension track control arm, front 11977

Front axle track control arm L bottom front 15 mm fits: FIAT TEMPRA, TIPO LANCIA DEDRA 1.1-2.0 07.87-07.99

View part

FEBI BILSTEIN Wheel suspension track control arm, front 11978

Front axle track control arm R bottom front 15 mm fits: FIAT TEMPRA, TIPO LANCIA DEDRA 1.1-2.0 07.87-07.99

View part

FEBI BILSTEIN Cooling system rubber hose 11980

Cooling system rubber hose top fits: MERCEDES 124 (A124), 124 (C124), 124 T-MODEL (S124), 124 (W124), E (W124) 2.6/3.0 08.85-06.95

View part

FEBI BILSTEIN Cabin filter 11981

Cabin filter cartridge fits: MERCEDES V (638/2), VITO (W638) 2.0-2.8 02.96-07.03

View part

FEBI BILSTEIN Tie rod end 11988

Tie rod end L/R fits: FORD CONSUL, ESCORT II, GRANADA, GRANADA I, GRANADA II, TAUNUS, TAUNUS III, TAUNUS V 1.1-3.0 01.70-08.85

View part

FEBI BILSTEIN Front ball joint 11990

Axle ball joint L/R (bottom front) (cone diameter 16mm, with bolts with nuts) fits: FORD TAUNUS, TAUNUS III, TAUNUS V 1.3-2.3 01.70-07.82

View part

FEBI BILSTEIN Windscreen washer pump 11995

Windscreen washer pump front (12V, one-step pump visor) fits: RENAULT 19 I, 19 II, 19 II CHAMADE, 21, CLIO I, CLIO II, ESPACE II, KANGOO, KANGOO EXPRESS, MASTER II, MASTER PRO AUTOBUS-SEDAN 07.85-

View part

FEBI BILSTEIN Tie rod (with end) 11996

Tie rod (with end) R fits: FORD GALAXY I, GALAXY MK I SEAT ALHAMBRA VW SHARAN, SHARAN FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.8-2.8 03.95-03.10

View part

FEBI BILSTEIN Tie rod (with end) 11997

Tie rod (with end) L fits: FORD GALAXY I, GALAXY MK I SEAT ALHAMBRA VW SHARAN, SHARAN FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.8-2.8 03.95-03.10

View part

FEBI BILSTEIN Tie rod end 11998

Tie rod end R fits: FORD GALAXY I, GALAXY MK I SEAT ALHAMBRA VW SHARAN, SHARAN FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.8-2.8 03.95-03.10

View part

FEBI BILSTEIN Tie rod end 11999

Tie rod end L fits: FORD GALAXY I, GALAXY MK I SEAT ALHAMBRA VW SHARAN, SHARAN FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.8-2.8 03.95-03.10

View part

FEBI BILSTEIN Tie rod (with no end) 12001

Tie rod (with no end) L/R (length: 185mm) fits: FORD GALAXY I, GALAXY MK I SEAT ALHAMBRA VW SHARAN, SHARAN FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.8-2.8 03.95-03.10

View part

FEBI BILSTEIN Stabilizer link 12002

Stabilizer link front L/R 205mm fits: FORD GALAXY I, GALAXY MK I SEAT ALHAMBRA VW SHARAN, SHARAN FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.8-2.8 03.95-03.10

View part

FEBI BILSTEIN Lights switch 12006

Light switch brake fits: MAN E2000, EL, F2000, F90, HOCL, LION ́S CITY, LION ́S CLASSIC, LION ́S STAR, M90, NG, NL, SL II, SÜ, ÜL STEYR E2000 01.85-

View part

FEBI BILSTEIN Drive shaft flexible joint 12007

Propeller shaft elastic coupling MERCEDES SPRINTER 2-T (901, 902), SPRINTER 3-T (903), SPRINTER 4-T (904) 2.3/2.3D/2.9D 01.95-05.06

View part

FEBI BILSTEIN Rear suspension beam repair kit 12009

Rear suspension beam repair kit (55mm) fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE PEUGEOT 405 I, 405 II, PARTNER 1.1-Electric 01.87-12.15

View part

FEBI BILSTEIN Wheel brake cylinder 12010

Brake cylinder rear L/R fits: FIAT CINQUECENTO, DUNA, ELBA, FIORINO, FIORINO FURGON/NADWOZIE WIELKOPRZESTRZENNE, PANDA, PENNY, SEICENTO / 600, UNO INNOCENTI ELBA 0.65-1.9D 09.79-01.10

View part

FEBI BILSTEIN Wheel brake cylinder 12011

Brake cylinder rear L/R fits: FIAT 500, 500 C, PANDA, PUNTO FORD KA LANCIA Y 1.0-1.7D 09.93-

View part

FEBI BILSTEIN Automatic transmission gasket/seal 12012

Automatic transmission gasket/seal fits: CITROEN SAXO PEUGEOT 106 I, 106 II RENAULT 19 I, 19 II, 19 II CHAMADE, 5, SUPER 5, TWINGO I 1.0-1.6 01.82-06.07

View part

FEBI BILSTEIN Wheel brake cylinder 12014

Brake cylinder rear L/R fits: ALFA ROMEO AR 6 CITROEN C25 FIAT DUCATO PEUGEOT J5 1.8-2.5D 09.81-05.94

View part

FEBI BILSTEIN Wheel brake cylinder 12015

Brake cylinder rear L/R fits: CITROEN JUMPER I, JUMPER II FIAT DUCATO PEUGEOT BOXER 1.9D-2.8D 02.94-06.06

View part

FEBI BILSTEIN Wheel brake cylinder 12016

Brake cylinder rear L/R fits: CITROEN JUMPER I, JUMPER II FIAT DUCATO PEUGEOT BOXER 1.9D-2.8D 02.94-09.09

View part

FEBI BILSTEIN Stabilizer bar bushing 12017

7700760264 cushion stabilizer ext. RENAULT 9, 11

View part

FEBI BILSTEIN Stabilizer bar bushing 12018

Stabilizer bar bushing front outer L/R (23mm) fits: RENAULT RAPID FURGON/NADWOZIE WIELKOPRZESTRZENNE, SUPER 5 1.0-1.9D 10.84-08.98

View part

FEBI BILSTEIN Engine mount 12019

Engine mount front L, hydraulic fits: RENAULT 19 I, 19 I CHAMADE, 19 II, 19 II CHAMADE, MEGANE I, MEGANE I CLASSIC, MEGANE I COACH, MEGANE SCÉNIC 1.2-1.8 01.88-08.03

View part

FEBI BILSTEIN Tie rod (with no end) 12020

Tie rod (with no end) L/R (length: 290mm) fits: FORD ESCORT IV, ESCORT IV EXPRESS, ORION II 1.1-1.8D 10.85-10.90

View part

FEBI BILSTEIN Pedal pad 12021

Pedal pad clutches fits: RENAULT 19 I, 19 I CHAMADE, 19 II, 19 II CHAMADE, CLIO I, ESPACE I, RAPID FURGON/NADWOZIE WIELKOPRZESTRZENNE, SUPER 5, TWINGO I 07.84-06.12

View part

FEBI BILSTEIN Engine mount 12022

Engine mount rear R, rubber-metal fits: RENAULT 19 I, 19 I CHAMADE, 19 II, 19 II CHAMADE, MEGANE I, MEGANE I CLASSIC, MEGANE I COACH, MEGANE SCÉNIC 1.2-2.0 01.88-08.03

View part

FEBI BILSTEIN Tie rod (with no end) 12025

Tie rod (with no end) L/R (length: 295,9mm) fits: CITROEN JUMPER I, JUMPER II FIAT DUCATO PEUGEOT BOXER 1.9D-2.8D 02.94-

View part

FEBI BILSTEIN MacPherson strut mount 12026

MacPherson strut mount front L/R (with a bearing) fits: CITROEN JUMPER I FIAT DUCATO PEUGEOT BOXER 1.9D-2.8D 02.94-04.02

View part

FEBI BILSTEIN MacPherson strut mount 12027

MacPherson strut mount front L/R (with a bearing) fits: CITROEN JUMPER I FIAT DUCATO PEUGEOT BOXER 1.9D-2.8D 02.94-04.02

View part

FEBI BILSTEIN MacPherson strut mount 12028

MacPherson strut mount front L/R fits: CITROEN JUMPER I FIAT DUCATO PEUGEOT BOXER 1.9D-2.8D 02.94-04.02

View part

FEBI BILSTEIN MacPherson strut mount 12029

MacPherson strut mount front L/R fits: CITROEN JUMPER I FIAT DUCATO PEUGEOT BOXER 1.9D-2.8D 02.94-04.02

View part

FEBI BILSTEIN MacPherson strut bearing 12030

MacPherson strut bearing front L/R fits: CITROEN JUMPER I, JUMPER II, JUMPER III FIAT DUCATO PEUGEOT BOXER 1.9D-Electric 03.89-

View part

FEBI BILSTEIN MacPherson strut mount 12031

MacPherson strut mount front L/R (with a bearing) fits: CITROEN JUMPER I, JUMPER II FIAT DUCATO PEUGEOT BOXER 1.9D-2.8D 02.94-09.09

View part

FEBI BILSTEIN Cylinder head bolt set 12032

Cylinder head bolt kit fits: BMW 1 (E87), 3 (E36), 3 (E46), 3 (E90), 3 (E91), 5 (E39), 5 (E60), 5 (E61), X3 (E83) 1.7D/2.0D 01.95-06.12

View part

FEBI BILSTEIN Cylinder head bolt set 12033

Cylinder head bolt kit fits: BMW 3 (E36), 3 (E46), 5 (E39), 5 (E60), 5 (E61), 7 (E38), 7 (E65, E66, E67), X3 (E83), X5 (E53), Z3 (E36), Z4 (E85) 2.0-3.0 01.91-12.10

View part

FEBI BILSTEIN Tie rod (with end) 12034

Tie rod (with end) L/R fits: CITROEN JUMPER I FIAT DUCATO PEUGEOT BOXER 1.9D-2.8D 02.94-

View part

Buying with Partios

Buying FEBI BILSTEIN parts through Partios

Are these genuine FEBI BILSTEIN parts?

Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FEBI BILSTEIN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.

Do you supply FEBI BILSTEIN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FEBI BILSTEIN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FEBI BILSTEIN order?

It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FEBI BILSTEIN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account