Partios Wholesale catalogue
Febi Bilstein Distributor | Parts
Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)
61,645 current catalogue lines
About the FEBI BILSTEIN range
The Febi Bilstein range at Partios is broad rather than specialised. It has 61,645 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 61,645 lines, is normally bought on fitment coverage rather than on any one part number.
Catalogue products
Vehicle references are indicative — confirm against the article number.
FEBI BILSTEIN Tie rod (with end) 11817
Tie rod (with end) L (dł.352mm) fits: BMW 5 (E39) 2.0-4.9 09.95-05.04
View partFEBI BILSTEIN Tie rod (with end) 11818
Tie rod (with end) R (dł.352mm) fits: BMW 5 (E39) 2.0-4.9 09.95-05.04
View partFEBI BILSTEIN Wheel suspension track control arm, front 11819
Front axle track control arm L top front fits: BMW 7 (E38) 2.5D-5.4 03.94-11.01
View partFEBI BILSTEIN Wheel suspension track control arm, front 11820
Front axle track control arm R top front fits: BMW 7 (E38) 2.5D-5.4 03.94-11.01
View partFEBI BILSTEIN Wheel suspension track control arm, front 11821
Front axle track control arm L bottom front fits: BMW 7 (E38) 2.5D-5.4 03.94-11.01
View partFEBI BILSTEIN Wheel suspension track control arm, front 11822
Front axle track control arm R bottom front fits: BMW 7 (E38) 2.5D-5.4 03.94-11.01
View partFEBI BILSTEIN Clutch servo repair kit 11827
Clutch servo repair kit , fits: VOLVO 7500, 8700, 8900, 9400, B10, B12, B58, B7, F10, F12, F16, FH12, FH16, FL, FL10, FL12, FL6, FL7, FM10, FM12, FM7, FS7, N10, N12, NH12, NL 01.73-
View partFEBI BILSTEIN Front ball joint 11829
Axle ball joint L/R (bottom front) (cone diameter 15,8mm) fits: CITROEN C5 I, C5 II, XANTIA, XM PEUGEOT 405 I, 405 II, 406, 605, 607 1.4-3.0 01.87-07.11
View partFEBI BILSTEIN Crankshaft oil seal 11830
Crankshaft oil seal in the front (42x66x6) fits: CITROEN AX, BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, BERLINGO MULTISPACE, BX, C15 1.0-1.6LPG 10.82-
View partFEBI BILSTEIN Tie rod (with no end) 11831
Tie rod (with no end) L/R (length: 320mm) fits: CITROEN EVASION, JUMPY I, JUMPY II FIAT MAREA, MULTIPLA, SCUDO, ULYSSE LANCIA ZETA PEUGEOT 806, EXPERT, EXPERT TEPEE 1.2-2.4D 06.94-
View partFEBI BILSTEIN Thermostat gasket 11834
Coolant thermostat gasket (80mmx80mmx4,5mm) fits: RVI KERAX, PREMIUM VOLVO 7500, 7700, 8700, 9400, B7, FL6, FL7 D6A180-TD73ES 09.85-
View partFEBI BILSTEIN Coolant temperature sensor 11839
Coolant temperature sensor (number of pins: 4, wrench size: 27mm, black) fits: VOLVO 7000, 7500, 8500, 8700, 9400, F10, F16, FL10, FL4, FL6, FL7, FS7 D10A310-THD104KF 09.85-
View partFEBI BILSTEIN Brake slack adjuster 11840
Brake slack adjuster L fits: VOLVO B58, F10, F12, N10, N12 01.73-12.98
View partFEBI BILSTEIN Valve cover gasket 11842
Febi cover gasket push Volvo F10/12, FL10 (TD100-3, TD120-3)
View partFEBI BILSTEIN Turbocharger gasket 11843
Turbocharger gasket (thickness 1mm) fits: VOLVO 7000, 7500, 8500, B10, B58 9.6/9.6D 01.78-
View partFEBI BILSTEIN Leaf spring rubber cushion 11844
Leafspring rubber pad/cushion (height: 76mm, width: 85mm) fits: VOLVO 7000, 7300, 7500, 7700, 8500, 8700, 8900, 9400, 9700, 9900, B10, B12, B58, B6, B7, B9, F10, F12, F16, FH12, FH16, FL10 01.76-
View partFEBI BILSTEIN Leaf spring fixing nut 11846
Shock absorber fixing nut M14 x 2mm (SW21)
View partFEBI BILSTEIN Tie rod (with no end) 11847
Tie rod (with no end) L/R (length: 315mm) fits: CITROEN XM PEUGEOT 605 2.0-3.0 05.89-10.00
View partFEBI BILSTEIN Front ball joint 11850
Axle ball joint L/R (bottom front) (cone diameter 16mm) fits: CITROEN AX, SAXO PEUGEOT 106 I, 106 II 1.0-Electric 07.86-07.04
View partFEBI BILSTEIN Tie rod end 11851
Tie rod end L fits: PEUGEOT 305 II, 405 I, 405 II 1.4-2.0 10.82-05.97
View partFEBI BILSTEIN Cooling system rubber hose 11852
Cooling system rubber hose top R fits: MERCEDES 123 T-MODEL (S123), 123 (W123) 2.0D/2.2D/2.9D 02.76-11.85
View partFEBI BILSTEIN Tie rod (with no end) 11853
Tie rod (with no end) L/R (length: 330mm) fits: CITROEN XANTIA PEUGEOT 406 1.6-3.0 06.95-12.04
View partFEBI BILSTEIN Tie rod (with no end) 11854
Tie rod (with no end) L/R (length: 375mm) fits: PEUGEOT 306 1.1-2.0D 04.93-12.02
View partFEBI BILSTEIN Tie rod end 11855
Tie rod end R fits: PEUGEOT 305 II, 405 I, 405 II 1.4-2.0 10.82-05.97
View partFEBI BILSTEIN Tie rod (with end) 11856
Tie rod (with end) L/R fits: PEUGEOT 306 1.1-2.0D 04.93-12.02
View partFEBI BILSTEIN Stabilizer bar bushing 11857
Stabilizer bar bushing front (53/70x91,5) fits: VOLVO FH12, FH16, FL6, FM10, FM12, FM7, FS7 09.85-
View partFEBI BILSTEIN Stabilizer bar bushing 11858
Stabilizer bar bushing front (35/56x50) fits: VOLVO FH12, FH16 08.93-
View partFEBI BILSTEIN Stabilizer bar bushing 11859
Stabilizer bar bushing front (60/74x96) fits: VOLVO FH12, FH16, FM10, FM12, FM7, FM9 08.93-
View partFEBI BILSTEIN Stabilizer bar bushing 11860
Stabilizer bar bushing rear (60/80/105x96) fits: RVI C, D, K, KERAX, PREMIUM 2 VOLVO FE, FH, FH II, FH III, FH12, FH16, FH16 II, FL, FL6, FM, FM II, FM III, FM10, FM12, FM7, FM9, FMX 09.85-
View partFEBI BILSTEIN Stabilizer bar bushing 11861
Stabilizer bar bushing rear (49/81,5x97) fits: VOLVO F10, F12, F16, FH, FH II, FH III, FH12, FH16, FH16 II, FL, FL10, FL12, FL6, FL7, FM, FM II, FM III, FM10, FM12, FM7, FM9, FMX, FMX II 01.73-
View partFEBI BILSTEIN Stabilizer bar bushing 11862
Febi bottom cushion stabilizer (truncated) P VOLVO FL4, FL608-17
View partFEBI BILSTEIN Brake shoe spring 11863
Brake shoe spring fits: VOLVO 7000, 7500, 8500, B10, B12, F10, F12, F16, FH, FH II, FH12, FH16, FH16 II, FL, FL10, FL12, FL6, FL7, FM, FM II, FM10, FM12, FM7, FM9, FMX, FMX II, FMX III 01.76-
View partFEBI BILSTEIN Stabilizer bar bushing 11864
Stabilizer bar bushing rear inner L/R (23mm) fits: MERCEDES SPRINTER 2-T (B901, B902), SPRINTER 3-T (B903) VW LT 28-35 II, LT 28-46 II 2.1D-2.9D 01.95-07.06
View partFEBI BILSTEIN Clutch master cylinder 11865
Clutch master cylinder (hole diameter 29mm) fits: VOLVO 8900, B10, B12, B58, B6, B7, F10, F12, F16, FL10, FL12, FL7, N10, N12, NL 01.73-
View partFEBI BILSTEIN Clutch master cylinder repair kit 11866
Clutch master cylinder repair kit fits: VOLVO 7300, 7500, 8300, 8500, 8700, 8900, 9400, 9500, 9700, 9900, B10, B12, B58, B7, F10, F12, F16, FH12, FH16, FL10, FL12, FL7, FM10, FM12 12.0D-9.6D 01.73-
View partFEBI BILSTEIN Injector elements 11867
Injector element (10mm rubber seal) fits: VOLVO 7000, 7500, 7700, 8500, 8700, 8900, 9400, B10, B12, B58, B6, B7, F10, F12, F16, F6, F7, FL, FL10, FL6, FL7, FM10, FS7, N10, N12 D10A310-THG103K
View partFEBI BILSTEIN Injector elements 11868
Injector element (5mm rubber seal) fits: VOLVO 7000, 7500, 7700, 8500, 8700, 8900, 9400, B10, B12, B58, B6, B7, F10, F12, F6, F7, FL10, FL6, FL7, FS7, N10, N12, NL D10A310-THG103K
View partFEBI BILSTEIN Injector elements 11869
Injector element (12mm Sleeve) fits: VOLVO 7000, 7500, 7700, 8500, B10, B12, B7, F10, F12, F6, F7, FL, FL10, FL6, FL7, FM10, FM7, FS7 D10A310-THG103K
View partFEBI BILSTEIN Injector elements 11870
Injector element (2,3mm rubber seal) fits: VOLVO 7300, 7500, 7700, 8300, 8500, 8700, 8900, 9400, 9500, 9700, 9900, B10, B12, B6, B7, F10, F12, F6, F7, FH, FH II, FH III, FH12 D10A310-THD103KF
View partFEBI BILSTEIN Propeller shaft support 11871
Febi prop shaft cpl. 60mm VOLVO FL6/7/10/12, F6/7/10/12/16, FS7, B9/10
View partFEBI BILSTEIN Propeller shaft support 11872
Febi prop shaft cpl. 70mm VOLVO FL7/10, F10/12/16, FH12/16
View partFEBI BILSTEIN Tie rod end 11873
Tie rod end L fits: MERCEDES MB (W631) 2.4D 02.88-02.96
View partFEBI BILSTEIN Tie rod end 11874
Tie rod end R fits: MERCEDES MB (W631) 2.4D 02.88-02.96
View partFEBI BILSTEIN Leaf spring silent block 11876
Silentblock/spring bush rear (131x80mm) fits: VOLVO F10, F12, F16, FH12, FH16, FL, FL10, FL12, FL6, FL7, FM10, FM12, FM7, FM9, N10, N12, NH12, NL, VNL 01.73-
View partFEBI BILSTEIN Axle brackets washer 11877
Axle brackets washer (inner diameter: 136mm/outer diameter: 175mm, thickness: 2,6mm) fits: VOLVO F10, F12, F16, FH, FH II, FH III, FH12, FH16, FH16 II, FL, FL10, FL12, FL6, FL7, FM, FM II 01.73-
View partFEBI BILSTEIN Leaf spring silent block 11878
Silentblock/spring bush (130) fits: VOLVO F10, F12, F16, FH12, FH16, FL10, FL12, FL7, FM10, FM12, FM7, FM9, N10, N12, NH12, NL 01.73-
View partFEBI BILSTEIN Spring cushion damper 11879
Suspension spring fender rear L/R fits: RVI T VOLVO F10, F12, F16, F7, FH II, FL10, FL12, FL7, FM, FM II, FM12, FM9, FMX, FMX II, FMX III, N10, N12, NL 01.73-
View partFEBI BILSTEIN Leaf spring silent block 11880
Silentblock/spring bush (x130) fits: VOLVO FH12, FH16, FL, FL6, FM10, FM12, FM7, FM9, NH12 09.85-
View partBuying with Partios
Buying FEBI BILSTEIN parts through Partios
Are these genuine FEBI BILSTEIN parts?
- Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source FEBI BILSTEIN parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.
Do you supply FEBI BILSTEIN parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on FEBI BILSTEIN parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a FEBI BILSTEIN order?
- It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for FEBI BILSTEIN parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account