Partios Wholesale catalogue

Febi Bilstein Distributor | Parts

Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)

61,646 current catalogue lines

About the FEBI BILSTEIN range

The Febi Bilstein range at Partios is broad rather than specialised. It has 61,646 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 61,646 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

FEBI BILSTEIN Timing set (chain+ elements) 106729

Timing set (chain + elements) fits: OPEL ASTRA K, INSIGNIA B, INSIGNIA B COUNTRY, INSIGNIA B GRAND SPORT, MOKKA / MOKKA X 1.4/1.4CNG/1.5 06.15-06.22

View part

FEBI BILSTEIN Tie rod (with no end) 106730

Tie rod (with no end) L/R (length: 223mm, with counter-nut) fits: MAZDA CX-7 2.2D/2.3/2.5 06.06-12.14

View part

FEBI BILSTEIN Coolant temperature sensor 106731

Coolant temperature sensor (number of pins: 1, black) fits: DAEWOO EVANDA, LACETTI, LANOS, LEGANZA, MATIZ, NEXIA, NUBIRA, TACUMA / REZZO OPEL ANTARA A 0.8-2.4LPG 02.95-

View part

FEBI BILSTEIN Intake manifold pressure sensor 106732

Intake manifold pressure sensor (3 pin) fits: CHEVROLET AVEO, CAMARO, CORVETTE, CRUZE, ORLANDO, TRAX OPEL ADAM, ASTRA J, ASTRA J GTC, CASCADA, CORSA D, CORSA E, INSIGNIA A, MERIVA B 1.4-6.2 09.08-

View part

FEBI BILSTEIN Coolant temperature sensor 106733

Coolant temperature sensor (number of pins: 3, grey) fits: FORD MONDEO III, RANGER, TRANSIT HONDA LOGO MAZDA 323 F V, 323 F VI, 323 S VI, 626 V, BT-50, DEMIO, MPV II, MX-5 II 1.0-3.0D 12.89-

View part

FEBI BILSTEIN Coolant temperature sensor 106734

Coolant temperature sensor (number of pins: 2, black) fits: FORD FOCUS II, TRANSIT JAGUAR F-PACE, F-TYPE, S-TYPE II, XE, XF I, XF II, XJ, XK II LAND ROVER DEFENDER, DISCOVERY III 1.6-5.0 06.98-

View part

FEBI BILSTEIN MacPherson strut mount 106735

MacPherson strut mount front L fits: NISSAN NOTE, NV200, QASHQAI I 1.4-2.0D 01.06-

View part

FEBI BILSTEIN Timing set (chain+ elements) 106736

Timing set (chain + elements) fits: OPEL ASTRA J, ASTRA J GTC, ASTRA K, CASCADA, INSIGNIA A, INSIGNIA A COUNTRY, INSIGNIA B, INSIGNIA B GRAND SPORT, ZAFIRA C 1.6 06.12-06.22

View part

FEBI BILSTEIN Radiator mounting 106738

Radiator mounting fits: VW TIGUAN 1.4 09.07-07.18

View part

FEBI BILSTEIN Radiator mounting 106739

Radiator mounting fits: VW TIGUAN 2.0 09.07-07.18

View part

FEBI BILSTEIN Timing set (chain+ elements) 106740

Timing set (chain + elements) fits: CHEVROLET TRAX OPEL ASTRA J, ASTRA J GTC, ASTRA K, INSIGNIA A, INSIGNIA A COUNTRY, INSIGNIA B, INSIGNIA B GRAND SPORT, MERIVA B 1.6D 02.13-06.22

View part

FEBI BILSTEIN Engine mount 106741

Engine mount front L/R (rubber-metal) fits: MAN TGL I D0834LFL40-D0834LFLAH 01.04-03.22

View part

FEBI BILSTEIN Front track control arm silent block 106742

Front track control arm silent block in the front L/R (12,3x49x45 mm) fits: DAEWOO NUBIRA 1.6/1.8/2.0 04.97-

View part

FEBI BILSTEIN Tie rod (with no end) 106743

Tie rod (with no end) L/R (length: 226mm) fits: HYUNDAI ELANTRA V, VELOSTER 1.6/1.6D/1.8 09.10-12.17

View part

FEBI BILSTEIN Leaf spring pad 106744

Suspension spring elements rear (length: 86mm, width: 42mm) fits: DAF CF 65, CF 75, CF 85, LF, LF 45, LF 55, XF 105 01.01-

View part

FEBI BILSTEIN Driver's cab suspension repair kit 106745

Cab tilt repair kit (for one side) fits: RVI MAGNUM 03.05-

View part

FEBI BILSTEIN Tie rod (with no end) 106746

Tie rod (with no end) L/R (length: 233,5mm, with counter-nut) fits: LEXUS LX TOYOTA LAND CRUISER 200 4.5D-5.7 08.07-

View part

FEBI BILSTEIN Tie rod end 106747

Tie rod end R fits: MERCEDES EQV (W447), MARCO POLO CAMPER (W447), V (W447), VITO MIXTO (DOUBLE CABIN), VITO TOURER (W447), VITO (W447) 2.0-Electric 03.14-

View part

FEBI BILSTEIN Tie rod end 106748

Tie rod end L fits: MERCEDES EQV (W447), MARCO POLO CAMPER (W447), V (W447), VITO MIXTO (DOUBLE CABIN), VITO TOURER (W447), VITO (W447) 2.0-Electric 03.14-

View part

FEBI BILSTEIN Shock absorber bumper 106749

Shock absorber bumper front L/R fits: HYUNDAI ACCENT IV, COUPE I, COUPE II, ELANTRA IV, ELANTRA V, I10 II, IX20, TIBURON, VELOSTER KIA RIO III, VENGA 1.0-2.7 08.96-

View part

FEBI BILSTEIN Fuel feed system one-way valve 10675

Fuel feed system one-way valve fits: MERCEDES 124 T-MODEL (S124), 124 (W124), E T-MODEL (S124), E (W124), S (C126), S (W126), SL (R107) 2.8-5.5 12.79-06.96

View part

FEBI BILSTEIN ABS sensor 106750

ABS sensor rear R fits: DACIA LOGAN, LOGAN EXPRESS, LOGAN MCV, SANDERO RENAULT LOGAN EXPRESS, LOGAN I, SANDERO/STEPWAY I, TWINGO I 1.2-1.6LPG 05.96-

View part

FEBI BILSTEIN MacPherson strut mount 106751

MacPherson strut mount front L/R fits: CHEVROLET CAPTIVA OPEL ANTARA A 2.0D-3.2 06.06-

View part

FEBI BILSTEIN Crankshaft pulley 106752

Crankshaft pulley (number of ribs: 6) fits: CHEVROLET AVEO / KALOS, SPARK 1.2 01.08-

View part

FEBI BILSTEIN Wheel hub 106753

Wheel hub front fits: MERCEDES ACTROS MP2 / MP3, ACTROS MP4 / MP5, ANTOS, ATEGO, ATEGO 2, ATEGO 3, AXOR 2 01.98-

View part

FEBI BILSTEIN Rear wishbone silent block 106758

Rear track control arm silent block R (in the front/rear) fits: HYUNDAI IX35 KIA SPORTAGE III 1.6-2.4 08.09-12.16

View part

FEBI BILSTEIN Rear wishbone silent block 106759

Rear track control arm silent block L (in the front/rear) fits: HYUNDAI IX35 KIA SPORTAGE III 1.6-2.4 08.09-12.16

View part

FEBI BILSTEIN Engine mount 10676

Engine mount front L/R, rubber-metal fits: MERCEDES CLK (C208), SPRINTER 2-T (B901, B902), SPRINTER 3-T (B903), SPRINTER 4-T (B904), T1 (601), T1 (601, 611), T1 (602), T1 (B601) 2.1D-4.3D

View part

FEBI BILSTEIN Vehicle frame silent block 106760

Vehicle frame silent block rear fits: KIA CARNIVAL II, CARNIVAL III 2.2D-3.5 07.02-06.15

View part

FEBI BILSTEIN ABS sensor 106761

ABS sensor rear L/R fits: FIAT IDEA LANCIA MUSA, YPSILON 1.2-1.9D 10.03-

View part

FEBI BILSTEIN ABS sensor 106762

ABS sensor rear L fits: FIAT FIORINO, FIORINO FURGON/NADWOZIE WIELKOPRZESTRZENNE, GRANDE PUNTO, LINEA, QUBO 1.2-Electric 10.05-

View part

FEBI BILSTEIN ABS sensor 106763

ABS sensor rear L/R fits: FIAT PANDA 1.1-1.4 09.03-

View part

FEBI BILSTEIN Engine mount 106764

Engine mount front R, top, hydraulic fits: HYUNDAI ACCENT III 1.4/1.6 11.05-11.10

View part

FEBI BILSTEIN Engine mount 106765

Engine mount front R, rubber-metal fits: HYUNDAI SANTA FÉ II KIA SORENTO II 2.0D-3.5 11.05-12.15

View part

FEBI BILSTEIN Torque arm repair kit 106766

Torque arm repair kit front L/R (M35x1,5, 85x248mm) fits: MERCEDES CITARO (O 530), CONECTO (O 345), O 405, TOURO (O 500) VOLVO B10 12.84-

View part

FEBI BILSTEIN Driver's cab shock absorber 106767

Driver's cab shock absorber front fits: SCANIA 3 BUS, G I, P I, R I, T 01.91-09.22

View part

FEBI BILSTEIN Air suspension bellows 106768

Air suspension bellows rear (diameter: 130/216mm) fits: IVECO EUROSTAR, EUROTECH MH, EUROTECH MP, EUROTRAKKER, STRALIS I, STRALIS II, TRAKKER I, TRAKKER II 01.93-

View part

FEBI BILSTEIN Air suspension bellows 106769

Air suspension bellows rear (diameter: 200/258mm)

View part

FEBI BILSTEIN Engine mount 10677

Engine mount front L/R, rubber-metal fits: MERCEDES CLK (C208), SPRINTER 2-T (B901, B902), SPRINTER 3,5-T (B909), SPRINTER 3-T (B903), SPRINTER 4,6-T (B909), SPRINTER 4-T (B904) 2.1D-4.3D 04.82-

View part

FEBI BILSTEIN Air suspension bellows 106770

Air suspension bellows rear (diameter: 197/228mm) fits: MERCEDES ACTROS MP4 / MP5, ANTOS, AROCS 07.11-

View part

FEBI BILSTEIN Air suspension bellows 106771

Air suspension bellows rear (diameter: 311mm)

View part

FEBI BILSTEIN Air suspension bellows 106772

Air suspension bellows rear (diameter: 226/258mm) fits: MERCEDES ACTROS MP4 / MP5, ANTOS, AROCS 07.11-

View part

FEBI BILSTEIN ABS sensor 106773

ABS sensor rear L/R fits: ALFA ROMEO 147 1.6-3.2 01.01-03.10

View part

FEBI BILSTEIN Torque arm repair kit 106774

Torque arm repair kit rear L/R (bushing, 23/75x166mm) fits: MAN TGA, TGS I, TGX I 04.00-

View part

FEBI BILSTEIN MacPherson strut mount 106777

MacPherson strut mount front L/R fits: BMW X5 (F15, F85), X6 (F16, F86) 2.0-4.4 08.13-07.19

View part

FEBI BILSTEIN Crankshaft sensor 106779

Crankshaft position sensor fits: MITSUBISHI ECLIPSE IV, GRANDIS, OUTLANDER I 2.4 03.01-12.12

View part

FEBI BILSTEIN Brake disc 10678

Brake disc front L/R fits: PEUGEOT 406 1.6-3.0 11.95-12.04

View part

FEBI BILSTEIN Knock sensor 106780

Knock combustion sensor fits: SUZUKI GRAND VITARA II, IGNIS I, IGNIS II 1.3-2.0 08.03-

View part

Buying with Partios

Buying FEBI BILSTEIN parts through Partios

Are these genuine FEBI BILSTEIN parts?

Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FEBI BILSTEIN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.

Do you supply FEBI BILSTEIN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FEBI BILSTEIN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FEBI BILSTEIN order?

It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FEBI BILSTEIN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account