Partios Wholesale catalogue

Febi Bilstein Distributor | Parts

Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)

61,646 current catalogue lines

About the FEBI BILSTEIN range

The Febi Bilstein range at Partios is broad rather than specialised. It has 61,646 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 61,646 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

FEBI BILSTEIN Crankshaft oil seal 102041

Crankshaft oil seal housing of a gearbox (90x104x9) fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 1 (F20), 1 (F21), 1 (F40), 2 (F22, F87), 2 (F23), 2 (F45), 2 GRAN COUPE (F44) 1.5D-3.0DH 06.04-

View part

FEBI BILSTEIN Crankshaft pulley 102042

Crankshaft pulley (number of ribs: 5) fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E46), 3 (E90), 3 (E91), 3 (E92), 5 (E60), X1 (E84), X3 (E83), Z4 (E85) 1.6/2.0 12.00-06.15

View part

FEBI BILSTEIN Crankshaft pulley 102043

Crankshaft pulley (number of ribs: 5) fits: FORD COUGAR, ESCORT CLASSIC, ESCORT VI, FOCUS I, MAVERICK, MONDEO I, MONDEO II, ORION III, TRANSIT CONNECT 1.6-2.0 01.92-

View part

FEBI BILSTEIN Crankshaft pulley 102044

Crankshaft pulley (number of ribs: 7) fits: MAZDA 5, 6 2.0D 06.02-05.10

View part

FEBI BILSTEIN Crankshaft pulley 102045

Crankshaft pulley (number of ribs: 3) fits: FIAT DUCATO PEUGEOT BOXER 2.0D/2.2D 12.01-07.06

View part

FEBI BILSTEIN Engine mount 102046

Engine mount front L, rubber-metal fits: HONDA HR-V 1.6 03.99-09.05

View part

FEBI BILSTEIN MacPherson strut mount 102047

MacPherson strut mount front R (with a bearing) fits: CITROEN JUMPER III FIAT DUCATO OPEL MOVANO C PEUGEOT BOXER 2.0D-Electric 04.06-

View part

FEBI BILSTEIN Valve cover gasket 102048

Rocker cover gasket fits: RVI MIDLUM, PREMIUM dCi11C-MIDR06.02.26W/4 04.96-

View part

FEBI BILSTEIN Steering knuckle repair kit 102053

King pin set (set per 1 wheel, with pivot 35mmx206mm) fits: DAF LF, LF 45 01.01-

View part

FEBI BILSTEIN Side mirror 102056

Side mirror L/R, manual, length: 437mm, width: 319mm, height: 103mm fits: RVI C, D, KERAX, MIDLUM, PREMIUM 2 10.05-

View part

FEBI BILSTEIN Side mirror 102057

Side mirror L, with heating, length: 551mm, width: 250mm, height: 200mm fits: SCANIA 3 BUS, 4 BUS, F, K I, N BUS 07.93-

View part

FEBI BILSTEIN Side mirror glass 102058

Side mirror glass R (157 x69mm, with heating) fits: IRISBUS MY WAY 01.02-12.07

View part

FEBI BILSTEIN Propeller shaft support 10206

Propeller shaft support (50mm) fits: MERCEDES E T-MODEL (S210), E (W210) 2.0-3.2 06.95-03.03

View part

FEBI BILSTEIN Electropneumatic control valve 102060

Electropneumatic control valve fits: DACIA DUSTER, LOGAN, LOGAN EXPRESS, LOGAN MCV, SANDERO RENAULT CLIO III, DUSTER, ESPACE IV, KANGOO EXPRESS, KANGOO II, LAGUNA 1.5D/2.0D/2.3D 09.02-

View part

FEBI BILSTEIN Axle rubber boot set 102062

Joint rubber boot inside (fi: 27/78) (length100) fits: MERCEDES M (W164), R (W251, V251) 3.0-6.3 02.05-12.14

View part

FEBI BILSTEIN Side mirror 102063

Side mirror L/R, manual, length: 444mm, width: 208mm fits: VOLVO F10, F12, F16, FL10, FL6, FL7, FLC, NL 01.76-09.00

View part

FEBI BILSTEIN Steering gear boot 102065

Steering gear boot L/R (length155mm 14mm/51mm) fits: NISSAN CUBE, MICRA III, NOTE, NV200, NV200 / EVALIA, TIIDA 1.0-1.8 03.02-

View part

FEBI BILSTEIN Steering gear boot 102067

Steering gear boot L/R (length166mm 14mm/50mm) fits: NISSAN JUKE, LEAF, QASHQAI +2, QASHQAI I, ROGUE, X-TRAIL, X-TRAIL II, X-TRAIL III RENAULT KOLEOS I 1.2-Electric 11.06-

View part

FEBI BILSTEIN Steering gear boot 102069

Steering gear boot L/R (length181mm 14mm/67mm) fits: MERCEDES S (C216), S (W221, V221) 2.2D-6.3 10.05-12.13

View part

FEBI BILSTEIN Steering gear boot 102071

Steering gear boot L/R (length200mm 16mm/53mm) fits: LEXUS GX TOYOTA 4 RUNNER V, COROLLA, FJ CRUISER, LAND CRUISER, LAND CRUISER PRADO 1.3-4.6 09.02-

View part

FEBI BILSTEIN Steering gear boot 102073

Steering gear boot L/R (length160mm 15mm/49mm) fits: TOYOTA RAV 4 III 2.0-3.5 11.05-12.13

View part

FEBI BILSTEIN Side mirror glass 102074

Side mirror glass L/R (305 x158mm) fits: MERCEDES ACTROS MP2 / MP3, ACTROS MP4 / MP5, ANTOS, AROCS, ATEGO, ATEGO 2, ATEGO 3, AXOR, AXOR 2 01.98-

View part

FEBI BILSTEIN Side mirror glass 102075

Side mirror glass R (409 x168mm, with heating) fits: IRISBUS CROSSWAY, EVADYS, MY WAY 01.02-

View part

FEBI BILSTEIN Propeller shaft support 102076

Propeller shaft support (with a bearing) fits: HYUNDAI GALLOPER II MITSUBISHI L200, PAJERO I, PAJERO II, PAJERO PININ I 1.8-2.8D 11.86-12.07

View part

FEBI BILSTEIN Rear wishbone silent block 102077

Rear track control arm silent block L/R (bottom rear) fits: MITSUBISHI PAJERO I 2.0/2.5D/3.0 01.83-12.91

View part

FEBI BILSTEIN MacPherson strut mount 102078

MacPherson strut mount front L/R fits: MITSUBISHI COLT V, LANCER VI 1.3/1.6 12.95-09.03

View part

FEBI BILSTEIN MacPherson strut mount 102079

MacPherson strut mount front L fits: HONDA CIVIC VII, CR-V II, STREAM 1.7/2.0/2.2D 05.01-03.07

View part

FEBI BILSTEIN MacPherson strut mount 102080

MacPherson strut mount front R fits: HONDA CIVIC VII, CR-V II, STREAM 1.7/2.0/2.2D 05.01-03.07

View part

FEBI BILSTEIN Front track control arm silent block 102081

Front track control arm silent block L/R (x73x60/73 mm) fits: ACURA TSX HONDA ACCORD VII 2.0-3.0 02.03-12.08

View part

FEBI BILSTEIN Front track control arm silent block 102082

Front track control arm silent block L/R (x80x66/80 mm) fits: HONDA ACCORD VIII 2.0-3.5 06.08-06.15

View part

FEBI BILSTEIN Engine mount 102083

Engine mount front R, bottom, rubber-metal fits: HONDA CIVIC V, CIVIC VI, CRX III, HR-V ROVER 400 II 1.4/1.5/1.6 10.91-09.05

View part

FEBI BILSTEIN Engine mount 102084

Engine mount front L, rubber-metal fits: HONDA CIVIC VI, CR-V I, LOGO 1.3-2.0 10.95-03.02

View part

FEBI BILSTEIN Engine mount 102087

Engine mount rear L, top, hydraulic fits: HONDA CIVIC V, CIVIC VI, CRX III 1.4/1.5/1.6 10.91-02.01

View part

FEBI BILSTEIN Engine mount 102088

Engine mount front R, rubber-metal fits: HONDA CIVIC VI, CR-V I 1.4-2.0 10.95-02.02

View part

FEBI BILSTEIN Engine mount 102089

Engine mount rear L, rubber-metal fits: HONDA CIVIC V, CIVIC VI, CR-V I, CRX III 1.4-2.0 10.91-02.02

View part

FEBI BILSTEIN Propeller shaft support 10209

Propeller shaft support (25mm, with a bearing) fits: MERCEDES E T-MODEL (S210), E (W210) 2.0-3.2 06.95-03.03

View part

FEBI BILSTEIN Front track control arm silent block 102090

Front track control arm silent block L/R (12,5x34x34/53,5 mm) fits: FORD B-MAX, FIESTA VI MAZDA 2 1.0-1.6D 07.07-12.17

View part

FEBI BILSTEIN Torque arm silent block 102091

Lateral control rod silentblock rear L/R fits: NISSAN PATROL GR IV, PATROL GR V 2.8D/4.2/4.2D 09.88-

View part

FEBI BILSTEIN Stabilizer bar bushing 102092

Stabilizer bar bushing front L/R (19,5mm) fits: MAZDA 323 F VI, 323 S VI 1.3-2.0D 05.98-05.04

View part

FEBI BILSTEIN Front track control arm silent block 102093

Front track control arm silent block L/R (16,5x37,2x49/59,5 mm) fits: FORD RANGER MAZDA BT-50 2.5D/3.0D 05.06-

View part

FEBI BILSTEIN Propeller shaft support 102094

Propeller shaft support (32mm, with a bearing) fits: NISSAN PICK UP 2.4/2.5D 03.86-02.98

View part

FEBI BILSTEIN Propeller shaft support 102095

Propeller shaft support (32mm, with a bearing) fits: NISSAN NAVARA, PICK UP, TERRANO I, TERRANO II 2.4-3.0D 03.86-

View part

FEBI BILSTEIN Propeller shaft support 102096

Propeller shaft support (30mm, with a bearing) fits: NISSAN BLUEBIRD, LAUREL, PICK UP 1.6-2.8D 01.80-12.12

View part

FEBI BILSTEIN MacPherson strut mount 102097

MacPherson strut mount front L/R (with a bearing) fits: NISSAN LARGO, PRIMERA 1.6/2.0/2.0D 07.90-06.99

View part

FEBI BILSTEIN Propeller shaft support 102099

Propeller shaft support (30mm, with a bearing) fits: TOYOTA HILUX VI, HILUX VII, RAV 4 I, RAV 4 II, TUNDRA 2.0-4.7 01.94-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 10210

Front axle track control arm R bottom front 17 mm fits: FORD FIESTA III 1.8 02.92-12.95

View part

FEBI BILSTEIN Drive shaft flexible joint 102100

Propeller shaft elastic coupling in the back (outer diameter 129mm) fits: TOYOTA PREVIA I 2.4 01.90-08.00

View part

FEBI BILSTEIN Engine mount 102101

Engine mount front L, rubber-metal fits: TOYOTA COROLLA 1.3/1.6 05.87-10.94

View part

Buying with Partios

Buying FEBI BILSTEIN parts through Partios

Are these genuine FEBI BILSTEIN parts?

Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FEBI BILSTEIN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.

Do you supply FEBI BILSTEIN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FEBI BILSTEIN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FEBI BILSTEIN order?

It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FEBI BILSTEIN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account