Partios Wholesale catalogue
Febi Bilstein Distributor | Parts
Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)
60,262 current catalogue lines
About the FEBI BILSTEIN range
The Febi Bilstein range at Partios is broad rather than specialised. It has 60,262 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 60,262 lines, is normally bought on fitment coverage rather than on any one part number.
Catalogue products
Vehicle references are indicative — confirm against the article number.
FEBI BILSTEIN Servo-motor diaphragm 07095
Servo-motor diaphragm 12" fits: MERCEDES NG SCANIA 2, 3, 3 BUS, 4, 4 BUS, G I, K I, N BUS, P I, R I, T VOLVO FM9 NEOPLAN CITYLINER, JETLINER, SKYLINER, SPACELINER, TRANSLINER 08.73-
View partFEBI BILSTEIN Servo-motor diaphragm 07096
Servo-motor diaphragm 16" fits: MERCEDES NG SCANIA 2, 3, 3 BUS, 4, 4 BUS, G I, K I, N BUS, P I, R I, T VOLVO FM9 NEOPLAN CITYLINER, JETLINER, SKYLINER, SPACELINER, TRANSLINER 08.73-
View partFEBI BILSTEIN Servo-motor diaphragm 07097
Servo-motor diaphragm 20" fits: MERCEDES NG SCANIA 2, 3, 3 BUS, 4, 4 BUS, G I, K I, N BUS, P I, R I, T VOLVO FM9 NEOPLAN CITYLINER, JETLINER, SKYLINER, SPACELINER, TRANSLINER 08.73-
View partFEBI BILSTEIN Servo-motor diaphragm 07098
Servo-motor diaphragm 24" fits: MERCEDES NG SCANIA 2, 3, 3 BUS, 4, 4 BUS, G I, K I, N BUS, P I, R I, T VOLVO FM9 NEOPLAN CITYLINER, JETLINER, SKYLINER, SPACELINER, TRANSLINER 08.73-
View partFEBI BILSTEIN Servo-motor diaphragm 07099
Servo-motor diaphragm 30" fits: MERCEDES NG SCANIA 2, 3, 3 BUS, 4, 4 BUS, G I, K I, N BUS, P I, R I, T VOLVO 7000, 7300, 7500, 7700, 8500, 8700, 8900, 9400, 9700, 9900, B10, B12, B58, B7 01.73-
View partFEBI BILSTEIN Servo-motor diaphragm 07100
Servo-motor diaphragm 36" fits: MERCEDES NG SCANIA 2, 3, 3 BUS, 4, 4 BUS, G I, K I, N BUS, P I, R I, T VOLVO FM9 NEOPLAN CITYLINER, JETLINER, SKYLINER, SPACELINER, TRANSLINER 08.73-
View partFEBI BILSTEIN Servo-motor diaphragm 07101
Servo-motor diaphragm 16" fits: MERCEDES NG SCANIA 2, 3, 3 BUS, 4, 4 BUS, G I, K I, N BUS, P I, R I, T NEOPLAN CITYLINER, JETLINER, SKYLINER, SPACELINER, TRANSLINER 08.73-
View partFEBI BILSTEIN Servo-motor diaphragm 07102
Servo-motor diaphragm 20" fits: MERCEDES NG SCANIA 2, 3, 3 BUS, 4, 4 BUS, G I, K I, N BUS, P I, R I, T VOLVO FM9 NEOPLAN CITYLINER, JETLINER, SKYLINER, SPACELINER, TRANSLINER 08.73-
View partFEBI BILSTEIN Servo-motor diaphragm 07103
Servo-motor diaphragm 24" fits: DAF CF, XD, XF 106 MERCEDES NG SCANIA 2, 3, 3 BUS, 4, 4 BUS, G I, K I, N BUS, P I, R I, T VOLVO FM9 NEOPLAN CITYLINER, JETLINER, SKYLINER, SPACELINER 08.73-
View partFEBI BILSTEIN Servo-motor diaphragm 07104
Servo-motor diaphragm 30" fits: MERCEDES NG SCANIA 2, 3, 3 BUS, 4, 4 BUS, G I, K I, N BUS, P I, R I, T VOLVO FM9 NEOPLAN CITYLINER, JETLINER, SKYLINER, SPACELINER, TRANSLINER 08.73-
View partFEBI BILSTEIN Rubber carburettor stand 07105
Rubber carburettor stand fits: SEAT CORDOBA, IBIZA II VW GOLF III, POLO, POLO II, VENTO 1.3/1.4 07.87-10.02
View partFEBI BILSTEIN Oil sump drain hole bolt gasket/seal 07106
Sump drain hole bolt seal (12,4x15,3x1,5) fits: FIAT BRAVO II 1.4 10.07-12.14
View partFEBI BILSTEIN Rubber carburettor stand 07107
Rubber carburettor stand fits: AUDI 100 C3, 80 B2, 80 B3, 80 B4, COUPE B2 VW GOLF II, JETTA II, PASSAT B2 1.6/1.8 08.78-12.94
View partFEBI BILSTEIN Propeller shaft support 07108
Propeller shaft support (30mmx30mm, with a bearing) fits: BMW 3 (E30) 1.8-2.7 09.82-11.93
View partFEBI BILSTEIN Oil pressure retention valve 07115
Oil pressure valve fits: MERCEDES /8 (W114), /8 (W115), 123 (W123), 123 T-MODEL (S123), G (W460), S (W108, W109), S (W116), T1 (601), T1 (B602), T1/TN, O 309 2.0D-6.8 03.68-12.91
View partFEBI BILSTEIN Stabilizer bar bushing 07116
Poduszka stabilizatora L/P (ścięta, 40x67x60) MERCEDES LK/LN2 01.84-12.98
View partFEBI BILSTEIN Oil pump suction pipe 07117
Oil pump suction pipe (24,5/33,5) fits: MERCEDES /8 (W115), 123 (C123), 123 (W123), 123 T-MODEL (S123), G (W460), MB (W631), PAGODE (W113), S (W108, W109), T1 (601), T1 (601 2.0-3.0D 10.67-02.96
View partFEBI BILSTEIN Rubber carburettor stand 07120
Rubber carburettor stand fits: AUDI 100 C3, 80 B3 1.8 08.82-07.90
View partFEBI BILSTEIN Engine mount 07121
Engine mount rear R, hydraulic fits: SEAT CORDOBA, CORDOBA VARIO, IBIZA II, INCA VW CADDY II, GOLF III, GOLF IV, POLO, POLO III, POLO III CLASSIC, VENTO 1.3-2.0 08.91-01.04
View partFEBI BILSTEIN Engine mount 07122
Engine mount rear R, hydraulic fits: SEAT CORDOBA, IBIZA II, INCA, TOLEDO I VW CADDY II, GOLF III, GOLF IV, PASSAT B3/B4, POLO, POLO III, POLO III CLASSIC, VENTO 1.6-2.0 08.91-01.04
View partFEBI BILSTEIN Engine mount 07124
Engine mount rear R, hydraulic fits: SEAT CORDOBA, CORDOBA VARIO, IBIZA II, INCA VW CADDY II, GOLF III, GOLF IV, POLO, POLO III, POLO III CLASSIC, VENTO 1.0-Electric 08.91-01.04
View partFEBI BILSTEIN Stabilizer bar bushing 07143
Stabilizer bar bushing rear (50/66x70) fits: MERCEDES LK/LN2 01.84-12.98
View partFEBI BILSTEIN Engine mount 07145
Engine mount front L, hydraulic fits: AUDI 100 C4, A6 C4, A6 C5 2.4/2.6/2.8 12.90-01.05
View partFEBI BILSTEIN Engine mount 07147
Engine mount front R, rubber-metal fits: AUDI 100 C4, A6 C4, A6 C5 2.4/2.6/2.8 12.90-01.05
View partFEBI BILSTEIN Propeller shaft support 07149
Propeller shaft support (30mmx30mm, with a bearing) fits: MERCEDES /8 (W115) 2.0/2.2/2.3 01.68-01.77
View partFEBI BILSTEIN Propeller shaft support 07150
Propeller shaft support (30mmx30mm, with a bearing)
View partFEBI BILSTEIN Propeller shaft support 07151
Propeller shaft support (30mm, with a bearing) fits: MERCEDES 123 (C123), 123 (W123), 123 T-MODEL (S123), 124 (W124), S (W116), SL (C107), SL (R107) 2.0-6.8 05.71-06.93
View partFEBI BILSTEIN Front ball joint 07153
Axle ball joint L/R (bottom front) (cone diameter 15mm, no bolts) fits: PORSCHE 924 VW GOLF I, SCIROCCO 1.1-2.0 02.74-08.89
View partFEBI BILSTEIN Propeller shaft support 07158
Podpora wału napędowego DB
View partFEBI BILSTEIN Propeller shaft support 07160
Podpora wału napędowego DB
View partFEBI BILSTEIN V-belt pulley 07162
V-belt pulley fits: MERCEDES /8 (W114), /8 (W115), 123 (C123), 123 (W123), 123 T-MODEL (S123), 190 (W201), G (W460), G (W463), HECKFLOSSE (W110), S (C126), S (W116), S (W126) 11.0D-6.8 07.65-
View partFEBI BILSTEIN Stabilizer bar bushing 07163
Stabilizer bar bushing rear (47/81x74) fits: MERCEDES LK/LN2 01.84-12.98
View partFEBI BILSTEIN Brake shoe pivot 07166
View partFEBI BILSTEIN Wheel suspension track control arm, front 07167
Front axle track control arm L/R bottom front 17 mm (with ball joint, silent blocks and bolts) fits: VW CADDY I, GOLF I, JETTA I, SCIROCCO 1.1-1.8 02.74-04.93
View partFEBI BILSTEIN Engine mount 07170
Engine mount front R, hydraulic fits: AUDI 100 C4, 80 B4, 90 B3, A6 C4, COUPE B3 2.0/2.2/2.3 04.87-12.97
View partFEBI BILSTEIN Engine mount 07171
Engine mount front L/R, hydraulic fits: AUDI 100 C2, 100 C4, 200 C2, 200 C3, 80 B4, 90 B3, A6 C4, COUPE B3 1.9-2.5D 03.77-12.97
View partFEBI BILSTEIN Engine mount 07172
Engine mount front L, hydraulic fits: AUDI 80 B4, CABRIOLET B3, COUPE B3 1.9D/2.0/2.3 10.88-12.96
View partFEBI BILSTEIN Engine mount 07175
Engine mount front R, hydraulic fits: AUDI 80 B4, CABRIOLET B3, COUPE B3 1.6/1.9D/2.0 05.89-08.00
View partFEBI BILSTEIN Bolts, nuts and pins 07176
Wheel nut (M12x1,5, length: 27,5mm, wrench size: 19mm, cone, quantity per packaging: 1pcs) fits: FORD C-MAX, COUGAR, ESCORT CLASSIC, ESCORT III, ESCORT IV, ESCORT V 0.9-3.0 05.76-12.13
View partFEBI BILSTEIN Engine mount 07177
Engine mount front R, hydraulic fits: AUDI 80 B4, CABRIOLET B3, COUPE B3 2.2/2.3 10.88-12.96
View partFEBI BILSTEIN Front suspension beam silent block 07179
Engine mount L/R fits: AUDI 80 B3, 80 B4, CABRIOLET B3, COUPE B3 1.6-2.8 10.88-08.00
View partFEBI BILSTEIN Front suspension beam silent block 07180
Engine mount L/R fits: AUDI 80 B1, 80 B2, 80 B3, 80 B4, 90 B2, 90 B3, COUPE B2, COUPE B3 VW PASSAT B1, PASSAT B2 1.3-2.8 05.72-
View partFEBI BILSTEIN Front suspension beam silent block 07181
Front suspension beam silent block (front) L/R fits: AUDI 80 B2, 80 B4, 90 B2, 90 B3, CABRIOLET B3, COUPE B2, COUPE B3 VW PASSAT B2, SANTANA 1.9-2.8 08.80-12.96
View partFEBI BILSTEIN Front suspension beam silent block 07182
Front suspension beam silent block (in the back) L/R fits: AUDI 80 B2, 80 B3, 80 B4, 90 B2, 90 B3, CABRIOLET B3, COUPE B2, COUPE B3 VW PASSAT B2 1.3-2.8 08.78-12.96
View partFEBI BILSTEIN Engine mount 07183
Engine mount front L, middle, rubber-metal fits: SEAT CORDOBA, CORDOBA VARIO, IBIZA II, INCA VW CADDY II, GOLF III, GOLF IV, PASSAT B3/B4, POLO, POLO III, POLO III CLASSIC 1.0-2.9 02.88-01.04
View partFEBI BILSTEIN Engine mount 07184
Engine mount front L/R, middle, rubber-metal fits: SEAT CORDOBA, CORDOBA VARIO, IBIZA II, INCA VW CADDY II, GOLF III, GOLF IV, POLO, POLO III CLASSIC, VENTO 1.0-1.9D 08.91-01.04
View partFEBI BILSTEIN Engine mount 07185
Engine mount front R, rubber-metal fits: SEAT CORDOBA, CORDOBA VARIO, IBIZA II, INCA VW CADDY II, GOLF III, GOLF IV, POLO, POLO III, POLO III CLASSIC, VENTO 1.3-1.9D 08.91-06.03
View partFEBI BILSTEIN Engine mount 07186
Engine mount front L, middle, rubber-metal fits: SEAT CORDOBA, CORDOBA VARIO, IBIZA II, INCA, TOLEDO I VW GOLF III, GOLF IV, PASSAT B3/B4, POLO, POLO III CLASSIC, VENTO 1.4-2.0 08.91-06.03
View partBuying with Partios
Buying FEBI BILSTEIN parts through Partios
Are these genuine FEBI BILSTEIN parts?
- Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source FEBI BILSTEIN parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.
Do you supply FEBI BILSTEIN parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on FEBI BILSTEIN parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a FEBI BILSTEIN order?
- It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for FEBI BILSTEIN parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account