Partios Wholesale catalogue

Febi Bilstein Distributor | Parts

Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)

61,645 current catalogue lines

About the FEBI BILSTEIN range

The Febi Bilstein range at Partios is broad rather than specialised. It has 61,645 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 61,645 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

FEBI BILSTEIN Rocker arm 05828

Rocker arm fits: BMW 3 (E21), 3 (E30), 5 (E12), 5 (E28), 5 (E34), Z1 2.0-2.7 03.77-11.93

View part

FEBI BILSTEIN Engine mount 05829

Engine mount front L/R, hydraulic fits: MERCEDES 124 T-MODEL (S124), 124 (W124), 190 (W201), E (W124) 1.8-3.0 10.82-06.95

View part

FEBI BILSTEIN Brake camshaft repair kit 05839

Brake expander shaft repair kit fits: BPW KH, KR, NR 01.82-

View part

FEBI BILSTEIN Wheel hub ring 05840

Wheel hub ring (42,5x46,5x3,6) fits: BPW

View part

FEBI BILSTEIN Steering system repair kit 05841

Steering rack repair kit fits: MERCEDES 123 (C123), 123 T-MODEL (S123), 123 (W123), 124 (A124), 124 (C124), 124 T-MODEL (S124), 124 (W124), /8 (W115), E (A124), E (C124) 2.0-6.3 01.68-03.98

View part

FEBI BILSTEIN Wheel bearing kit 05845

Wheel bearing kit front L/R (19x45x17) fits: FORD TRANSIT VW TRANSPORTER T2 1.6-2.5D 08.67-03.00

View part

FEBI BILSTEIN Wheel bearing kit 05847

Wheel bearing kit rear L/R (45x80x45) fits: VW CALIFORNIA T4 CAMPER, TRANSPORTER T4 1.8-2.8 07.90-06.03

View part

FEBI BILSTEIN Wheel bearing kit 05848

Wheel bearing kit front L/R (45x80x45) fits: VW CALIFORNIA T4 CAMPER, TRANSPORTER T4 1.8-2.8 07.90-06.03

View part

FEBI BILSTEIN Multiple V-belt tensioning roll 05853

Multiple V-belt tensioning roll fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, SAXO, ZX PEUGEOT 106 I, 106 II, 205, 205 II, 306, 309 II, PARTNER 1.0-2.0 10.87-12.15

View part

FEBI BILSTEIN Drive shaft flexible joint 05854

Propeller shaft elastic coupling rear (outer diameter 131mm, Manual) fits: FORD ESCORT V, ESCORT VI, GRANADA, GRANADA II, SCORPIO I, SIERRA II, TRANSIT 1.6-2.9 08.77-10.98

View part

FEBI BILSTEIN Drive shaft flexible joint 05856

Propeller shaft elastic coupling

View part

FEBI BILSTEIN Stabilizer fitting elements 05857

Stabilizer fitting element (bolt) fits: BPW

View part

FEBI BILSTEIN Wheel bearing kit 05860

Wheel bearing kit rear L/R (45x80x26) fits: MERCEDES T1 (601), T1 (601, 611), T1 (602), T1 (B601), T1 (B602) 2.3-3.0D 04.77-02.96

View part

FEBI BILSTEIN Engine mount 05865

Engine mount front L/R, hydraulic fits: MERCEDES 124 (W124) 3.0 08.85-08.92

View part

FEBI BILSTEIN Engine mount 05866

Engine mount front L/R, hydraulic fits: MERCEDES 124 (C124), 124 T-MODEL (S124), 124 (W124), 190 (W201), E (C124) 2.5D-3.6 08.85-06.97

View part

FEBI BILSTEIN Steering knuckle seal 05868

Steering knuckle seal (51x58x4) fits: MERCEDES LK/LN2, MK, SK 01.84-12.98

View part

FEBI BILSTEIN Steering knuckle repair kit 05869

King pin set (set per 1 wheel, with pivot 50mmx109mm) fits: MAN E2000, F2000, F8, F9, F90, L2000, M 2000 L, M 2000 M, M90, TGA, TGM I, TGS I MERCEDES ACTROS, ACTROS MP2 / MP3, AROCS 08.73-

View part

FEBI BILSTEIN Steering knuckle repair kit 05875

King pin set (50/64mmx119mm) fits: MAN E2000, F2000, F8, F9, F90, L2000, M 2000 L, M 2000 M, M90, TGA, TGM I, TGS I MERCEDES ACTROS, ACTROS MP2 / MP3, AROCS, ATEGO, AXOR 2, NG, SK 08.73-

View part

FEBI BILSTEIN Steering knuckle pivot 05880

Steering pivot (M24x6,5mm) fits: MERCEDES AL

View part

FEBI BILSTEIN Steering knuckle seal 05881

Steering knuckle seal (10x14x1)

View part

FEBI BILSTEIN Handbrake cable 05886

Handbrake cable rear L/R (3960mm, brake type: disc) fits: FORD FIESTA, FIESTA FURGON/NADWOZIE WIELKOPRZESTRZENNE, FIESTA III 1.0-1.8D 01.89-01.97

View part

FEBI BILSTEIN Timing belt tension roll/pulley 05889

Timing belt tension roll/pulley fits: RENAULT 21, ESPACE I, ESPACE II, MASTER I, SAFRANE I, TRAFIC 2.0D/2.1D 03.80-07.98

View part

FEBI BILSTEIN Timing belt support roller/pulley 05892

Timing belt support roller/pulley fits: RENAULT 19 I, 19 I CHAMADE, 19 II, 19 II CHAMADE, CLIO I, CLIO II, KANGOO, KANGOO EXPRESS, MEGANE I, MEGANE I COACH, SPORT SPIDER, THALIA I 1.8/1.9D/2.0 06.89-

View part

FEBI BILSTEIN Wheel bearing 05894

Wheel bearing - single front fits: VOLVO 240, 260 2.0-2.8 08.74-08.93

View part

FEBI BILSTEIN Wheel bearing 05895

Wheel bearing - single front fits: VOLVO 440, 460, 480 1.6-2.0 04.86-12.96

View part

FEBI BILSTEIN Timing belt tension roll/pulley 05897

Timing belt tension roll/pulley fits: NISSAN KUBISTAR RENAULT 19 I, 19 II, 19 II CHAMADE, CLIO I, CLIO II, KANGOO, KANGOO EXPRESS, MEGANE I, MEGANE I COACH, MEGANE SCÉNIC 1.0-1.6 01.88-

View part

FEBI BILSTEIN Centering rings 05901

Centring ring (22x32x5,5mm) fits: BPW KH, KR, NH, NR 01.82-

View part

FEBI BILSTEIN Centering rings 05901 100SET

Centring ring (22x32x5,5mm) fits: BPW KH, KR, NH, NR 01.82-

View part

FEBI BILSTEIN Wheel hub 05902

Wheel hub front fits: VOLVO 740, 760, 940, 940 II, 960 2.0-2.9 08.81-10.98

View part

FEBI BILSTEIN Timing belt tension roll/pulley 05906

Timing belt tension roll/pulley fits: RENAULT 19 I, 19 I CHAMADE, 19 II, 19 II CHAMADE, CLIO I, MEGANE I, MEGANE I COACH, SPORT SPIDER 1.8/2.0 06.89-08.03

View part

FEBI BILSTEIN Wheel bearing kit 05913

Wheel bearing set with hub front L/R (43x82x37) fits: AUDI 100 C3, 100 C4, 200 C3, A4 B5, A6 C4, V8 SKODA SUPERB I VW PASSAT B5, PASSAT B5.5 1.8-4.2 08.82-03.08

View part

FEBI BILSTEIN Bolts, nuts and pins 05915

Wheel bolt rear 7/8"-11BSFx97/109mm (thread length 73mm, Phosphate conversion coated / Steel) fits: SCANIA 4 05.95-04.08

View part

FEBI BILSTEIN Bolts, nuts and pins 05916

Wheel bolt 7/8"-11BSFx68/81mm (thread length 46mm, Phosphate conversion coated / Steel) fits: SCANIA 3, 3 BUS, 4, 4 BUS, F, G I, K I, N BUS, P I, R I, T 05.87-

View part

FEBI BILSTEIN Bolts, nuts and pins 05917

Wheel bolt front 7/8"-11BSFx86/98mm (thread length 63mm, Phosphate conversion coated / Steel) fits: SCANIA 4 05.95-04.08

View part

FEBI BILSTEIN Wheel bearing 05918

Wheel bearing - single rear fits: AUDI 80 B3, 80 B4, 90 B3, A4 B6, A4 B7, A6 C5, A8 D2, ALLROAD C5, COUPE B3 1.6-6.0 09.86-03.09

View part

FEBI BILSTEIN Wheel suspension track control arm, front 05920

Front axle track control arm R bottom front 17 mm fits: FORD ESCORT CLASSIC, ESCORT V, ESCORT V EXPRESS, ESCORT VI, ORION III 1.3-2.0 07.90-06.01

View part

FEBI BILSTEIN Wheel suspension track control arm, front 05921

Front axle track control arm L bottom front 17 mm fits: FORD ESCORT CLASSIC, ESCORT V, ESCORT V EXPRESS, ESCORT VI, ORION III 1.3-2.0 07.90-06.01

View part

FEBI BILSTEIN Engine mount 05922

Engine mount front L/R (rubber-metal) fits: SCANIA 3, 3 BUS NEOPLAN CITYLINER DS11.34-OSC11G01 05.87-

View part

FEBI BILSTEIN Gear shifting, outer 05925

Gear shifting, outer fits: SCANIA 3 113/113 E/310/113 E/320/113 E/340/113 E/360/113 E/380/113 H/310/113 H/320/113 H/360/113 H/380/113 M/310/113 M/320/113 M/340/113 M/360/113 M/380/113 M/400/143 E/400/

View part

FEBI BILSTEIN Leaf spring silent block 05926

Silentblock/spring bush rear L/R (65x30) fits: SCANIA 3, 3 BUS, 4, 4 BUS, F, G I, K I, N BUS, P I, R I, T 05.87-

View part

FEBI BILSTEIN Multi V-belt pulley 05929

Multi V-belt pulley (metal) fits: RENAULT 19 II, 19 II CHAMADE 1.8 04.92-06.96

View part

FEBI BILSTEIN Steering knuckle repair kit 05930

King pin set (with bearing 45/46mmx225mm) fits: MERCEDES T2/L 01.59-01.95

View part

FEBI BILSTEIN Steering knuckle repair kit 05931

Febi crossover repair kit (two pages) 45x225 DB

View part

FEBI BILSTEIN Multiple V-belt tensioning roll 05933

Multiple V-belt tensioning roll fits: RENAULT 19 I, 19 I CHAMADE, 19 II, 19 II CHAMADE, CLIO I, ESPACE III, LAGUNA I, MEGANE I, MEGANE I COACH, MEGANE SCÉNIC 1.8/2.0 06.89-08.03

View part

FEBI BILSTEIN Brake shoe spring 05940

Brake shoe spring 170x22x4

View part

FEBI BILSTEIN Fuel filler cap 05942

Fuel filler cap (width 60mm, with the key, key pad on the side) fits: SCANIA 3 BUS, G I, P I, R I, T 01.91-09.22

View part

FEBI BILSTEIN Stabilizer bar sleeve 05944

Rubber ring for stabilizing bar front/rear (20/57x30mm) fits: SCANIA 3, 3 BUS, 4, 4 BUS, F, G I, K I, N BUS, P I, R I, S, T 05.87-

View part

FEBI BILSTEIN Crankshaft gear bolt 05945

View part

Buying with Partios

Buying FEBI BILSTEIN parts through Partios

Are these genuine FEBI BILSTEIN parts?

Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FEBI BILSTEIN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.

Do you supply FEBI BILSTEIN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FEBI BILSTEIN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FEBI BILSTEIN order?

It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FEBI BILSTEIN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account