Partios Wholesale catalogue

Febi Bilstein Distributor | Parts

Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)

59,785 current catalogue lines

About the FEBI BILSTEIN range

The Febi Bilstein range at Partios is broad rather than specialised. It has 59,785 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 59,785 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

FEBI BILSTEIN Tie rod end 02278

Tie rod end L fits: AUDI 100 C3 1.8-2.5D 08.82-07.91

View part

FEBI BILSTEIN Tie rod (with end) 02279

Tie rod (with end) R fits: AUDI 100 C3, 200 C3 1.8-2.5D 08.82-12.91

View part

FEBI BILSTEIN Tie rod end 02280

Tie rod end R fits: AUDI 100 C3 1.8-2.5D 08.82-07.91

View part

FEBI BILSTEIN Center link 02281

Longitudinal steering rod (L-635mm 14) fits: VW TRANSPORTER T2 1.6-2.0 08.68-07.79

View part

FEBI BILSTEIN Tie rod end 02284

Tie rod end L fits: VW GARBUS, TRANSPORTER T2 1.2-2.0 08.67-03.81

View part

FEBI BILSTEIN Tie rod end 02285

Tie rod end R fits: VW GARBUS, TRANSPORTER T2 1.2-2.0 08.65-03.81

View part

FEBI BILSTEIN Water pump 02286

Water pump, with a gasket fits: MERCEDES G (W460), MB (W631), MB (W661), T1 (601), T1 (601, 611), T1 (B602), T1/TN 2.0D/2.4D/3.0D 12.77-12.02

View part

FEBI BILSTEIN Tie rod (with no end) 02287

Tie rod (with no end) L/R fits: VW TRANSPORTER T2, TRANSPORTER T3 1.6-2.1 08.67-07.92

View part

FEBI BILSTEIN Tie rod (with end) 02289

Tie rod (with end) L (dł.400mm) fits: VW LT 28-35 I, LT 40-55 I 2.0-2.7D 04.75-06.96

View part

FEBI BILSTEIN Tie rod end 02290

Tie rod end R fits: VW LT 28-35 I, LT 40-55 I, TRANSPORTER T2 1.6-2.7D 08.68-06.96

View part

FEBI BILSTEIN Tie rod end 02291

Tie rod end L fits: VW LT 28-35 I, LT 40-55 I 2.0-2.7D 04.75-06.96

View part

FEBI BILSTEIN Water pump 02292

Water pump, with a gasket fits: MERCEDES 124 (C124), 124 (W124), 124 T-MODEL (S124), 190 (W201), E (W124), E T-MODEL (S124), G (W463), S (W126), SL (R107) BMW 3 (E30) 2.3-3.0 09.83-09.97

View part

FEBI BILSTEIN Wheel hub cover 02296

Wheel hub cover (wheel cap)

View part

FEBI BILSTEIN Cylinder head bolt set 02312

Cylinder head bolt kit fits: FORD ESCORT III, ESCORT III EXPRESS, ESCORT IV, ESCORT IV EXPRESS, ESCORT V, ESCORT V EXPRESS, ESCORT VI, FIESTA, FIESTA II, FIESTA III, ORION I 1.1-1.6 09.80-08.00

View part

FEBI BILSTEIN Flywheel bolt set 02313

Flywheel Bolt

View part

FEBI BILSTEIN Engine mount 02314

Engine mount front R, rubber-metal fits: MERCEDES 190 (W201) 2.0/2.0D 10.82-08.93

View part

FEBI BILSTEIN Engine mount 02315

Engine mount front R, rubber-metal fits: MERCEDES 123 (C123), 123 (W123), 123 T-MODEL (S123) 2.0/2.3 02.76-12.85

View part

FEBI BILSTEIN Stabilizer link 02317

1233200989 adapter (bracket) rear stabilizer DB W123/126 SPRINTER (BM906 4/06-)

View part

FEBI BILSTEIN Gear shifting, outer 02318

Gear shifting, outer fits: MERCEDES /8 (W114) 200 (115.015)/200 (123.020)/200 (123.220)/200 D (115.115)/200 D (123.120)/200 G (460.136, 460.237, 460.236)/200 GE (460.216)/220 (115.010)/220 D (115.110)

View part

FEBI BILSTEIN Cylinder head bolt 02321

Cylinder head bolt fits: MERCEDES CITARO (O 530), CONECTO (O 345), MK, NG, O 303, O 304, O 305, O 307, O 330, O 340, O 403, O 404, O 405, O 407, O 408, OH, SK M476.920-OM489.961 01.70-

View part

FEBI BILSTEIN Cylinder head bolt 02322

Cylinder head bolt fits: MERCEDES CITARO (O 530), CONECTO (O 345), MK, NG, O 303, O 304, O 305, O 307, O 330, O 340, O 403, O 404, O 405, O 407, O 408, OH, SK M476.920-OM489.961 01.70-

View part

FEBI BILSTEIN Connecting rod bolt 02323

Connecting rod bolt fits: MERCEDES T2/L 11.6D 01.59-01.95

View part

FEBI BILSTEIN Wheel cover 02326

Wheel cap front, material: steel,, silver, number of holes: 10, rim diameter: 20-22,5inch (painted) fits: DAF XF II, XG, XG+ MAN E2000 MERCEDES ACTROS, ACTROS MP2 / MP3, ACTROS MP4 / MP5, ANTOS

View part

FEBI BILSTEIN Gear shifter lever ball joint 02331

Gearshift control rod ball-and-socket joint (M12x1,75mm M10x1,5mm) fits: DAF 65, 65 CF, 75, 75 CF, 85, 85 CF, 95, F 2700, F 2800, F 2900, F 3200, F 3300, F 3600, SB SCANIA 3, 3 BUS, 4 01.74-

View part

FEBI BILSTEIN Gear shifter lever ball joint 02332

Gearshift control rod ball-and-socket joint (M12x1,75mm M10x1,5mm L- 55mm) fits: DAF 65, 65 CF, 75, 75 CF, 85, 85 CF, 95, 95 XF, CF 75, CF 85, F 2700, F 2800, F 2900, F 3200, F 3300 01.74-

View part

FEBI BILSTEIN MacPherson strut mount 02336

MacPherson strut mount front L/R (with a bearing) fits: VW CADDY I, GOLF I, JETTA I, SCIROCCO 1.1-1.8 02.74-07.92

View part

FEBI BILSTEIN Leaf spring pivot o-ring 02343

Shock absorber pivot o-ring 23,5 mm x 6,5mm NBR (from the front) fits: SCANIA 2, 3, 3 BUS, 4, G I, P I, R I, T 05.80-

View part

FEBI BILSTEIN Leaf spring pivot o-ring 02344

Shock absorber pivot o-ring 31,5 mm x 6,5mm NBR

View part

FEBI BILSTEIN Steering system repair kit 02345

Steering rack repair kit fits: MERCEDES 190 (W201) 1.8-2.6 10.82-08.93

View part

FEBI BILSTEIN Wheel hub nut 02346

Wheel hub nut rear (M24, 17mm) fits: MERCEDES 124 (A124), 124 (C124), 124 (W124), 124 T-MODEL (S124), 190 (W201), C (W202), C T-MODEL (S202), CLK (A208), CLK (C208), E (A124) 1.8-6.0 10.82-03.03

View part

FEBI BILSTEIN Brake pad wear sensor 02352

Brake pad wear sensor front (quantity per packaging: 1pcs) fits: MERCEDES SPRINTER 5-T (B905), T2/LN1, VARIO (B667, B670, B668), VARIO (B670, B668, B667) 2.3-4.3D 04.86-

View part

FEBI BILSTEIN Brake shoe 02353

Brake shoe (310x190, wVA number: 19604 19605) fits: MERITOR TM

View part

FEBI BILSTEIN Radiator/Coolant pressure cap 02359

Radiator filler cap (1,2bar) fits: MERCEDES /8 (W114), /8 (W115), 123 (C123), 123 (W123), 123 T-MODEL (S123), S (C126), S (W108, W109), S (W116), S (W126), SL (C107), SL (R107) 2.0-6.8 10.67-

View part

FEBI BILSTEIN Stabilizer clasp 02362

Stabilizer rear L/R (32mm/56/65mmx51mm) fits: MAN FOC, G, G90, L2000 D0224MF-D0836LFL02 10.79-

View part

FEBI BILSTEIN Rubber carburettor stand 02365

Rubber carburettor stand fits: AUDI 50 VW DERBY, GOLF I, JETTA I, POLO, POLO II, SCIROCCO 0.8-1.3 04.74-09.89

View part

FEBI BILSTEIN Brake shoe roll 02373

Febi brake shoe roller 25.5 / 32x36/57mm ROR

View part

FEBI BILSTEIN Antifreeze/coolant fluids and concentrates 02374

Antifreeze/coolant fluids and concentrates (coolant type G11/G48) (1,5L, 1:1=-35°C), yellow, contains: mono-ethyleneglycol fits: MERCEDES VARIO, VARIO (B667, B670, B668), VARIO (B670) 11.0D-6.4D

View part

FEBI BILSTEIN Brake shoe o-ring 02377

Febi brake shoe roller-ring (28x2) ROR

View part

FEBI BILSTEIN Front ball joint 02380

Axle ball joint L/R (bottom front) (cone diameter 18mm) fits: MERCEDES 124 (A124), 124 (C124), 124 (W124), 124 T-MODEL (S124), 190 (W201), E (A124), E (C124), E (W124) 1.8-6.0 10.82-10.01

View part

FEBI BILSTEIN Steering centre link 02381

Steering centre link L (538mm) fits: MERCEDES 124 (C124), 124 (W124), 124 T-MODEL (S124) 2.0-3.0D 12.84-08.93

View part

FEBI BILSTEIN Steering centre link 02382

Steering centre link R fits: MERCEDES 124 (C124), 124 (W124), 124 T-MODEL (S124) 2.0-4.2 12.84-08.93

View part

FEBI BILSTEIN Tie rod end 02383

Tie rod end L/R fits: MERCEDES 124 (A124), 124 (C124), 124 (W124), 124 T-MODEL (S124), E (A124), E (C124), E (W124), E T-MODEL (S124) 2.0-3.6 12.84-03.98

View part

FEBI BILSTEIN Tie rod end 02384

Tie rod end L/R fits: MERCEDES 123 (C123), 123 (W123), 123 T-MODEL (S123), 124 (A124), 124 (C124), 124 (W124), 124 T-MODEL (S124), 190 (W201), E (A124), E (C124), E (W124) 1.8-6.8 08.72-03.98

View part

FEBI BILSTEIN Tie rod (with end) 02386

Tie rod (with end) L/R fits: MERCEDES 124 (A124), 124 (C124), 124 (W124), 124 T-MODEL (S124), E (A124), E (C124), E (W124), E T-MODEL (S124) 2.0-6.0 12.84-03.98

View part

FEBI BILSTEIN Engine mount 02388

Engine mount rear/from gearbox side, rubber-metal fits: MERCEDES /8 (W114), /8 (W115), 123 (C123), 123 (W123), 123 T-MODEL (S123), 124 (A124), 124 (C124), 124 (W124) 1.8-6.0 01.68-03.06

View part

FEBI BILSTEIN Hub seal 02390

Febi seal (O-ring), 122.5 x114x2 hub, 5 BPW

View part

FEBI BILSTEIN Camshaft 02391

Camshaft fits: OPEL ASCONA C, CORSA A, CORSA A TR, KADETT D, KADETT E 1.3 08.79-02.93

View part

FEBI BILSTEIN Brake shoe sleeve 02392

Brake shoe bush (32x35x36,5)

View part

Buying with Partios

Buying FEBI BILSTEIN parts through Partios

Are these genuine FEBI BILSTEIN parts?

Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FEBI BILSTEIN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.

Do you supply FEBI BILSTEIN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FEBI BILSTEIN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FEBI BILSTEIN order?

It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FEBI BILSTEIN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account