Partios Wholesale catalogue

Febi Bilstein Distributor | Parts

Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)

59,785 current catalogue lines

About the FEBI BILSTEIN range

The Febi Bilstein range at Partios is broad rather than specialised. It has 59,785 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 59,785 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

FEBI BILSTEIN Handbrake cable 01958

Handbrake cable front L/R (830mm, brake type: drum) fits: MERCEDES T1 (601), T1 (601, 611), T1 (602), T1 (B601), T1 (B602) 2.3-3.0D 04.77-02.96

View part

FEBI BILSTEIN Door seal 01960

Door seal rear L fits: MERCEDES C (W202), C T-MODEL (S202) 03.93-03.01

View part

FEBI BILSTEIN Door seal 01961

Door seal rear R fits: MERCEDES C (W202), C T-MODEL (S202) 03.93-03.01

View part

FEBI BILSTEIN Oil pump 01962

Oil pump fits: MERCEDES LK/LN2, MK, NG, OH, UNIMOG OM353.950-OM382.950 01.70-

View part

FEBI BILSTEIN Tensioner roll bolt 01963

Tensioner roll bolt fits: MERCEDES 124 (W124), 124 T-MODEL (S124), C (W202), C T-MODEL (S202), E (W124), E (W210), E T-MODEL (S124), E T-MODEL (S210), G (W463), S (W140) 2.0D-3.4D 01.88-

View part

FEBI BILSTEIN Connecting rod bolt 01964

Connecting rod bolt fits: MERCEDES 123 (C123), 123 (W123), 123 T-MODEL (S123), 124 (A124), 124 (C124), 124 (W124), 124 T-MODEL (S124), 190 (W201), C (W202), C T-MODEL (S202), CLK (A208) 1.8-6.0

View part

FEBI BILSTEIN MacPherson strut mount 01967

MacPherson strut mount rear L/R fits: BMW 3 (E30), 3 (E36), 3 (E46), 7 (E32), Z3 (E36) 1.6-3.4 09.82-07.06

View part

FEBI BILSTEIN Handbrake cable 01969

Handbrake cable front R (1130mm, brake type: drum) fits: MERCEDES T1 (601), T1 (601, 611), T1 (B601), T1 (B602) 2.3-3.0D 04.77-02.96

View part

FEBI BILSTEIN Wheel bearing 01971

Wheel bearing - single rear fits: OPEL CALIBRA A, OMEGA A, OMEGA B, SENATOR B, VECTRA A 1.8-3.6 09.86-07.03

View part

FEBI BILSTEIN Wheel bearing 01972

Wheel bearing - single rear fits: OPEL OMEGA A 1.8/2.0/2.3D 09.86-03.94

View part

FEBI BILSTEIN Drive shaft flexible joint 01975

Propeller shaft elastic coupling in the front (outer diameter 132mm, bolts) fits: MERCEDES 123 (W123), 124 (C124), 124 (W124), 124 T-MODEL (S124), 190 (W201), E (A124), E (C124) 2.0-3.0D 01.76-03.98

View part

FEBI BILSTEIN Drive shaft flexible joint 01976

Propeller shaft elastic coupling front/rear (outer diameter 132mm, Automatic/Manual) fits: MERCEDES 123 (C123), 123 (W123), 123 T-MODEL (S123), 124 (C124), 124 (W124) 2.0-3.0D 01.76-03.98

View part

FEBI BILSTEIN Brake shoe 01978

Febi ham.2 jaw pieces (without lining), 175mm Volvo FL7/10 F10/12/16, FH12/16 (Z-CAM

View part

FEBI BILSTEIN Brake shoe 01979

Febi brake shoes 2 pcs (without lining), 200mm Volvo F10/12, FH12/16 (Z-CAM)

View part

FEBI BILSTEIN Brake shoe 01980

Febi ham.2 jaw pieces (without lining Z-CAM), 225mm Volvo FL7/10, F10/12/16, FH12 / 6

View part

FEBI BILSTEIN Oil pump 01981

Oil pump fits: MERCEDES SPRINTER 2-T (B901, B902), SPRINTER 3-T (B903), SPRINTER 4-T (B904), T1 (601), T1 (601, 611), T1 (602), T1 (B601), T1 (B602), T1/TN 2.8D/2.9D 10.88-05.06

View part

FEBI BILSTEIN Stabilizer bar bushing 01982

Stabilizer bar bushing front L/R (28mm) fits: MERCEDES S (C140), S (W140) 2.8-6.0 02.91-12.99

View part

FEBI BILSTEIN Exhaust system bolt 01983

Exhaust system bolt x MERCEDES ACTROS, ACTROS MP2 / MP3, ATEGO, AXOR, CITARO (O 530), CITO (O 520), CONECTO (O 345), ECONIC, LK/LN2, LP, MK, NG, O 100, O 301, O 302, O 303 01.99D-18.3D 01.55-

View part

FEBI BILSTEIN Exhaust system bolt 01984

Exhaust system bolt x MERCEDES ACTROS, ACTROS MP2 / MP3, ATEGO, AXOR, CITARO (O 530), CITO (O 520), CONECTO (O 345), ECONIC, LK/LN2, LP, MK, NG, O 100, O 301, O 302, O 303 01.99D-18.3D 01.55-

View part

FEBI BILSTEIN Bolts, nuts and pins 01985

Febi pin wheels TRILEX M18x2x110mm SCANIA MAN BPW DB

View part

FEBI BILSTEIN Exhaust system bolt 01986

Exhaust system bolt x MERCEDES ACTROS, ACTROS MP2 / MP3, ATEGO, AXOR, CITARO (O 530), CITO (O 520), CONECTO (O 345), ECONIC, LK/LN2, LP, MK, NG, O 100, O 301, O 302, O 303 01.99D-18.3D 01.55-

View part

FEBI BILSTEIN Stabilizer bar bushing 01987

Stabilizer bar bushing front L/R (26mm) fits: MERCEDES E (W210), S (C140), S (W140) 2.0-6.0 02.91-03.02

View part

FEBI BILSTEIN Engine mount 01988

Engine mount front L/R, hydraulic fits: MERCEDES C (W202), E (W210), E T-MODEL (S210) 2.8-5.0 05.93-05.00

View part

FEBI BILSTEIN Steering system repair kit 01989

Steering rack repair kit fits: MERCEDES S (C140), S (W140) 2.8-6.0 02.91-12.99

View part

FEBI BILSTEIN Hub seal 01992

Wheel hub seal (117/152x152,8/152,8x25) fits: SAF 5, B, ESNMP, EU, EZN, IERDZW, KRZ, RBM, RLBM, RLSM, RS, RSM, RST, RZ, RZM, SKRS, WRLZM, WRSM, WRZ, WRZM, WZRLZM MERITOR LM, LMC

View part

FEBI BILSTEIN Dipstick gasket/seal 01993

Dipstick gasket (length: 72mm) fits: AUDI 100 C3, 100 C4, 80 B2, 80 B3, 80 B4, A4 B5, A6 C4, A6 C5, CABRIOLET B3, COUPE B2, COUPE B3 SEAT ALHAMBRA, CORDOBA, CORDOBA VARIO, IBIZA II 1.3-2.9 08.75-

View part

FEBI BILSTEIN Oil sump 02004

Oil sump (steel) (with cap with seal) fits: SEAT ALHAMBRA, CORDOBA, CORDOBA VARIO, IBIZA II, INCA, TOLEDO I VW CADDY I, CADDY II, CORRADO, GOLF I, GOLF II, GOLF III, GOLF IV 1.6-2.0 08.82-03.10

View part

FEBI BILSTEIN Oil sump 02005

Oil sump (steel) fits: AUDI 100 C3, 100 C4, 80 B1, 80 B2, 80 B3, 80 B4, 90 B3, A4 B5, A6 C4, CABRIOLET B3, COUPE B2, COUPE B3 VW PASSAT B1, PASSAT B2, SANTANA 1.3-2.0 05.72-

View part

FEBI BILSTEIN Front track control arm silent block 02008

Front track control arm silent block in the front L/R (10x38x52 mm) fits: CHEVROLET CHEVY OPEL COMBO, CORSA B, TIGRA 1.0-1.7D 03.93-09.06

View part

FEBI BILSTEIN MacPherson strut mount 02009

MacPherson strut mount front L/R fits: OPEL ASTRA F, ASTRA F CLASSIC, ASTRA G 1.4-2.0 09.91-01.05

View part

FEBI BILSTEIN Cooling system metal pipe 02010

Cooling system metal pipe fits: MERCEDES 124 (A124), 124 (C124), 124 (W124), 124 T-MODEL (S124), E (W124), S (W126), SL (R107), SL (R129) 2.6/2.9/3.0 08.85-06.95

View part

FEBI BILSTEIN Propeller shaft support 02011

Propeller shaft support (35mm, with a bearing) fits: MERCEDES LK/LN2, T2/LN1, VARIO, VARIO (B667, B670, B668), VARIO (B670), VARIO (B670, B668, B667) 03.84-

View part

FEBI BILSTEIN Propeller shaft support 02012

Podpora wału napędowego

View part

FEBI BILSTEIN Brake shoe spring 02013

Brake shoe spring 99x31x2,8 fits: SAF BP, KRZP, RSK, RSM, RSMP, RZMP, SK, SKRLS, SKRLZ, WESNM, WEZN, WEZNMP, WRLZM, WZRLZM, Z

View part

FEBI BILSTEIN Front track control arm silent block 02014

Front track control arm silent block in the front L/R (10x33x52 mm) fits: OPEL CORSA A, CORSA A TR 1.0-1.6 09.82-07.94

View part

FEBI BILSTEIN Front track control arm silent block 02015

Front track control arm silent block in the back L/R (16x60/68x58 mm) fits: OPEL ASTRA F, ASTRA F CLASSIC, ASTRA G, CALIBRA A, VECTRA A 1.4-2.5 04.88-01.05

View part

FEBI BILSTEIN Wheel bearing 02017

Wheel bearing - single

View part

FEBI BILSTEIN Engine mount 02023

Engine mount rear, bottom, rubber-metal fits: OPEL ASTRA F, CALIBRA A, VECTRA A 1.7D/1.8/2.0 09.88-03.01

View part

FEBI BILSTEIN Transmission mount 02024

Transmission mount rear L (automatic/manual) fits: OPEL COMBO, CORSA B, TIGRA 1.0-1.7D 03.93-12.02

View part

FEBI BILSTEIN Engine mount 02025

Engine mount front R, rubber-metal fits: OPEL COMBO, CORSA B 1.5D/1.7D 03.93-12.02

View part

FEBI BILSTEIN Engine mount 02026

Engine mount front R, rubber-metal fits: OPEL CORSA B 1.0-1.6 03.93-09.00

View part

FEBI BILSTEIN Engine mount 02027

Engine mount front R, rubber-metal fits: OPEL CORSA B, TIGRA 1.0/1.2/1.4 07.94-12.00

View part

FEBI BILSTEIN Engine mount 02028

Engine mount front L, rubber-metal fits: DAEWOO LANOS OPEL COMBO, CORSA B 1.2-1.6 03.93-

View part

FEBI BILSTEIN Engine mount 02029

Engine mount front L, rubber-metal fits: OPEL COMBO, CORSA B, TIGRA 1.2/1.4/1.6 03.93-10.01

View part

FEBI BILSTEIN Engine mount 02032

Engine mount rear R, rubber-metal fits: OPEL ASTRA F, ASTRA G, ASTRA H, VECTRA A, ZAFIRA B 1.4-1.8 04.88-04.15

View part

FEBI BILSTEIN Engine mount 02033

Engine mount front L, rubber-metal fits: DAEWOO LANOS OPEL COMBO, CORSA B 1.5/1.5D/1.7D 03.93-12.02

View part

FEBI BILSTEIN Engine mount 02034

Engine mount rear R, rubber-metal fits: OPEL CORSA A, KADETT E, KADETT E COMBO 1.2-2.0 09.84-07.94

View part

FEBI BILSTEIN Valve stem gasket/seal 02036

Valve stem gasket/seal (9x11/9/11) fits: MERCEDES C (W202), C T-MODEL (S202), E (W210) 2.0D/2.2D 08.93-03.02

View part

Buying with Partios

Buying FEBI BILSTEIN parts through Partios

Are these genuine FEBI BILSTEIN parts?

Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FEBI BILSTEIN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.

Do you supply FEBI BILSTEIN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FEBI BILSTEIN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FEBI BILSTEIN order?

It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FEBI BILSTEIN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account