Partios Wholesale catalogue

Febi Bilstein Distributor | Parts

Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)

59,785 current catalogue lines

About the FEBI BILSTEIN range

The Febi Bilstein range at Partios is broad rather than specialised. It has 59,785 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 59,785 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

FEBI BILSTEIN Clutch servo 01000

Clutch actuator (20,64mm) fits: BMW 3 (E21), 3 (E30), 5 (E12), 5 (E28), 6 (E24), Z1 1.6-3.5 03.72-06.94

View part

FEBI BILSTEIN Steering rack 01001

Steering rack mechanical (new) fits: FORD FIESTA, FIESTA III 1.0-1.6 01.89-01.97

View part

FEBI BILSTEIN Axle rubber boot set 01003

Joint rubber boot front/outside (fi: 32/82) (length107) fits: FORD FOCUS I, MONDEO III 1.4-2.0 08.98-03.07

View part

FEBI BILSTEIN Axle rubber boot set 01005

Joint rubber boot front/outside (fi: 32/82) (length107) fits: FORD FOCUS I, MONDEO III 1.4-2.0 08.98-03.07

View part

FEBI BILSTEIN Axle rubber boot set 01006

Washer

View part

FEBI BILSTEIN Axle rubber boot set 01007

Joint rubber boot front/outside (fi: 24/72) (length105) fits: FORD KA 1.3 09.96-11.08

View part

FEBI BILSTEIN Driver’s cab suspension nut 01010

Cab bracket nut M14x1,5mm (hexagonal)

View part

FEBI BILSTEIN Valve cover gasket 01012

Rocker cover gasket R fits: BMW 5 (E28), 5 (E34), 6 (E24), 7 (E23), 7 (E32) 2.5-3.5 05.77-03.94

View part

FEBI BILSTEIN Valve cotter 01014

Valve cotter fits: AUDI 100 C4, 80 B3, 80 B4, A2, A3, A4 B5, A4 B6, A4 B7, A6 C4, A6 C5, A8 D2, CABRIOLET B3, COUPE B3 BMW 3 (E21), 3 (E30), 3 (E36), 3 (E46), 5 (E12), 5 (E28) 1.0-5.6 03.77-

View part

FEBI BILSTEIN Valve cotter 01017

Valve cotter fits: MERCEDES A (V177), A (W168), A (W169), A (W176), A (W177), AMG GT (C190), AMG GT (C192), AMG GT (R190), AMG GT (X290), B SPORTS TOURER (W245), B SPORTS TOURER (W246 1.0-6.3 09.89-

View part

FEBI BILSTEIN Brake shoe 01019

Brake shoe fits: BMW 3 (E36) 1.6-1.8 09.90-08.00

View part

FEBI BILSTEIN Rear wishbone silent block 01022

Rear track control arm silent block L/R (bottom/inner rear) fits: BMW 3 (E30), 3 (E36), 3 (E46), X3 (E83), Z1, Z4 (E85), Z4 (E86), Z4 (E89) 1.6-3.2 09.82-08.16

View part

FEBI BILSTEIN Exhaust system bumping block 01026

Buffer of the exhaust system (śr.50 M10x1,5mm M10x1,5mm) fits: MAN F8, FOC, HOCL, L2000, LION ́S CITY, LION ́S CLASSIC, LION ́S COACH, M 2000 L, M 2000 M, ND, NG, NL, NÜ, SG, SL II, SÜ 04.81-

View part

FEBI BILSTEIN Wheel suspension track control arm, front 01032

Front axle track control arm R top front 16,4 mm (no silentblock) fits: BMW 5 (E34) 1.8-4.0 06.87-07.96

View part

FEBI BILSTEIN Leaf spring fixing nut 01033

Shock absorber fixing nut M24 x 1,5mm (SW37) fits: MERCEDES

View part

FEBI BILSTEIN Wheel suspension track control arm, front 01034

Front axle track control arm L top front 16,4 mm (no silentblock) fits: BMW 5 (E34) 1.8-4.0 06.87-07.96

View part

FEBI BILSTEIN Pedal pad 01035

Pedal pad brake/clutches fits: MAN F8, F9, F90 UNTERFLUR, FOC, G, G90, HOCL, SL, SR, SÜ 10.75-01.99

View part

FEBI BILSTEIN Mountain brake servomotor 01036

Working cylinder (250N, L-168mm, stroke: 48mm, diameter: 28mm, fitting hole diameter: 8mm) fits: MERCEDES LP, MK, NG, O 301, O 303, O 305, O 307, O 330, O 402, O 403, O 404, OH, SK 09.63-

View part

FEBI BILSTEIN Brake expander lever repair kit 01038

Brake expander lever repair kit fits: MAN CLA 10.163 LAC, LAEC, LARC, LAERC/10.163 LAEK, LAEK-L, LAERK, LAERK-L, LAK, LAK-L, LARK/10.185 LAC, LAEC, LARC, LAERC, LA-LA (LE180C)/10.185 LAEK, LAEK-L, LAE

View part

FEBI BILSTEIN Axle rubber boot set 01043

Joint rubber boot front/outside (fi: 24/72) (length105) fits: FORD KA 1.3 09.96-11.08

View part

FEBI BILSTEIN Timing chain tensioner 01044

Timing chain tensioner fits: MERCEDES /8 (W114), 123 (C123), 123 (W123), 123 T-MODEL (S123), G (W460), S (W116), S (W126), SL (C107), SL (R107) 2.7 06.72-05.93

View part

FEBI BILSTEIN Timing chain tensioner 01045

Timing chain tensioner fits: MERCEDES /8 (W115), 123 (C123), 123 (W123), 123 T-MODEL (S123), T2/L, O 309 2.0/2.2/2.3 01.68-02.89

View part

FEBI BILSTEIN Axle rubber boot set 01047

Joint rubber boot front/inside (fi: 22/76) (length102) fits: FORD FIESTA, FIESTA IV, KA, PUMA 1.25-1.8D 08.95-11.08

View part

FEBI BILSTEIN Timing chain tensioner 01048

Timing chain tensioner fits: MERCEDES /8 (W115), 123 (W123), 123 T-MODEL (S123), G (W460), MB (W631), MB (W661), T1 (601), T1 (601, 611), T1 (B601), T1 (B602), T1/TN, T2/L, T2/LN1 1.8-3.0D 01.68-

View part

FEBI BILSTEIN Timing chain tensioner 01049

Timing chain tensioner fits: MERCEDES 123 (W123), 123 T-MODEL (S123) 2.9D 02.76-11.85

View part

FEBI BILSTEIN Timing chain tensioner 01050

Timing chain tensioner fits: MERCEDES 123 (C123), 123 (W123), 123 T-MODEL (S123), 124 (C124), 124 (W124), 124 T-MODEL (S124), 190 (W201), G (W460), G (W461), G (W463) 1.8/2.0/2.3 01.68-07.00

View part

FEBI BILSTEIN Stabilizer link repair kit 01052

Link stabilizer repair kit front L/R (45mm) fits: MERCEDES MK, NG, SK 08.73-12.96

View part

FEBI BILSTEIN Steering knuckle repair kit 01055

King pin set (length 131,5mm) fits: VW LT 28-35 I, LT 40-55 I 2.0-2.7D 04.75-06.96

View part

FEBI BILSTEIN Wheel bearing kit 01063

Wheel bearing kit rear L/R (45x80x26) fits: MERCEDES T1 (601), T1 (601, 611), T1 (602), T1 (B601), T1 (B602) 2.3-3.0D 04.77-02.96

View part

FEBI BILSTEIN Stabilizer link repair kit 01064

Link stabilizer repair kit front L/R fits: MERCEDES NG, SK 08.73-12.96

View part

FEBI BILSTEIN Tow bar element 01070

Bearing bush (30x36x100)

View part

FEBI BILSTEIN Wheel suspension track control arm, front 01071

Front axle track control arm R bottom front 16,4 mm (aluminium) fits: BMW 5 (E34), 7 (E32) 1.8-5.0 03.85-07.96

View part

FEBI BILSTEIN Water pump 01073

Water pump, with a gasket fits: AUDI 100 C2, 100 C3, 200 C2, 200 C3, 80 B2, 90 B2, 90 B3, COUPE B2, QUATTRO VW PASSAT B2, SANTANA 1.9-2.3 03.77-12.91

View part

FEBI BILSTEIN Wheel suspension track control arm, front 01078

Front axle track control arm L bottom front 16,4 mm (aluminium) fits: BMW 5 (E34), 7 (E32) 1.8-5.0 03.85-07.96

View part

FEBI BILSTEIN Stabilizer bar bushing 01079

Stabilizer bar bushing rear L/R (13mm) fits: MERCEDES 124 (C124), 124 (W124), 124 T-MODEL (S124), 190 (W201), E (C124), E (W124), E T-MODEL (S124), SL (R129) 1.8-6.0 10.82-10.01

View part

FEBI BILSTEIN Stabilizer bar bushing 01080

Stabilizer bar bushing front L/R (21mm) fits: MERCEDES 123 T-MODEL (S123) 2.0-2.9D 09.77-11.85

View part

FEBI BILSTEIN Stabilizer bar bushing 01083

Stabilizer bar bushing rear L/R (14mm) fits: MERCEDES 190 (W201), C (W202), C T-MODEL (S202), SL (R129) 1.8-3.0 09.86-03.01

View part

FEBI BILSTEIN Stabilizer bar bushing 01084

Stabilizer bar bushing front inner L/R (24mm) fits: MERCEDES 124 (C124), 124 (W124), 190 (W201), E (W124) 2.0-2.5D 01.85-06.95

View part

FEBI BILSTEIN Stabilizer bar bushing 01085

Stabilizer bar bushing front L/R (24,5mm) fits: MERCEDES S (C126), S (W126) 2.5-5.5 10.79-06.91

View part

FEBI BILSTEIN Antifreeze/coolant fluids and concentrates 01089

Antifreeze/coolant fluids and concentrates (coolant type G11/G48) (1,5L, 1:1=-35°C), blue, contains: mono-ethyleneglycol fits: IVECO DAILY II, DAILY III, DAILY IV, DAILY V, DAILY VI 0.6-Electric

View part

FEBI BILSTEIN Crankshaft oil seal 01090

Crankshaft oil seal housing of a gearbox (85x105x11) fits: AUDI 100 C1, 100 C2, 100 C3, 100 C4, 200 C2, 200 C3, 50, 80 B1, 80 B2, 80 B3, 80 B4, 90 B2, 90 B3, A4 B5, A4 B6, A8 D2 0.8-6.0 11.68-

View part

FEBI BILSTEIN Engine mount 01091

Engine mount front L/R, cartridge fits: SEAT CORDOBA, CORDOBA VARIO, IBIZA II, INCA, TOLEDO I VW CADDY II, CORRADO, GOLF II, GOLF III, GOLF IV, JETTA II, PASSAT B3/B4 1.0-Electric 08.83-01.04

View part

FEBI BILSTEIN Water pump 01092

Water pump, with a gasket fits: AUDI 100 C4, 80 B4, A6 C4, CABRIOLET B3, COUPE B3 2.2/2.3 10.88-12.97

View part

FEBI BILSTEIN Lubricant fitting 01094 100SET

Lubricant fitting 100pcs 15mm fits: SAF RZMP, SK, SKRLB, SKRLS

View part

FEBI BILSTEIN Lubricant fitting 01095

Lubricant fitting 1pcs M8x1/90°

View part

FEBI BILSTEIN Lubricant fitting 01096/100

Lubricant fitting 100pcs M10x1/0° (set straight) fits: SAF IDZ, IERDZW, IRDZW, IRDZWI, IRUDZ, IRUDZW, KRSP, KRZP, RZMP, RZP, SKRSP, VDS, VDZ, VERZT, VRDS, VRS, VRZ BPW KH, KM, SH, SKH, SKM

View part

FEBI BILSTEIN Lubricant fitting 01097

Lubricant fitting 1pcs M10x1 fits: SAF EBN, ERZ, ERZM, ERZT, ESN, RBM, RS, RSK, RSM, RST, RZ, RZM, RZMP, RZT, WRZ, WRZM, ZRLS

View part

FEBI BILSTEIN Lubricant fitting 01098

Lubricant fitting 1pcs M10x1

View part

Buying with Partios

Buying FEBI BILSTEIN parts through Partios

Are these genuine FEBI BILSTEIN parts?

Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FEBI BILSTEIN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.

Do you supply FEBI BILSTEIN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FEBI BILSTEIN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FEBI BILSTEIN order?

It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FEBI BILSTEIN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account