Partios Wholesale catalogue

FAG Suspension Distributor | Suspension & Steering

Wheel suspension track control arm, front (958) · Tie rod end (803) · Stabilizer link (665) · Front track control arm silent block (493) · Tie rod (with no end) (487) · Front ball joint (374) · Macpherson strut mount (315) · Stabilizer bar bushing (275) · 41 further part types (1,123)

5,360 current catalogue lines

About the FAG SUSPENSION range

FAG Suspension is a suspension & steering brand, and the range Partios carries reaches across 49 part types. The largest groups are wheel suspension track control arm, front (958), tie rod end (803), stabilizer link (665), front track control arm silent block (493) and tie rod (with no end) (487). Beyond those, 1,713 lines are spread across 43 further part types. That tail includes macPherson strut mount, stabilizer bar bushing and wheel suspension track control arm, rear. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 5,360 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

FAG SUSPENSION Tie rod (with no end) 840 1223 10

Tie rod (with no end) L/R (length: 200mm) fits: NISSAN CUBE, MICRA III, NOTE, NV200, NV200 / EVALIA, TIIDA 1.0-Electric 01.03-

View part

FAG SUSPENSION Tie rod (with no end) 840 1224 10

Tie rod (with no end) L/R (length: 214mm) fits: ALFA ROMEO 159, BRERA, SPIDER 1.8-3.2 06.05-12.12

View part

FAG SUSPENSION Tie rod (with no end) 840 1225 10

Tie rod (with no end) L/R (length: 193mm) fits: DACIA DOKKER, DOKKER FURGON/NADWOZIE WIELKOPRZESTRZENNE, LODGY, LOGAN II, LOGAN MCV II, SANDERO II 0.9-1.6LPG 03.12-

View part

FAG SUSPENSION Tie rod (with no end) 840 1226 10

Tie rod (with no end) L/R (length: 342mm) fits: CITROEN C-CROSSER, C-CROSSER ENTERPRISE MITSUBISHI LANCER VIII, OUTLANDER II PEUGEOT 4007 1.5-3.0 11.06-

View part

FAG SUSPENSION Tie rod (with no end) 840 1227 10

Tie rod (with no end) L/R (length: 329mm) fits: CUPRA ATECA SEAT ATECA, TARRACO SKODA KAROQ, KODIAQ I, SUPERB III VW ARTEON, ARTEON SHOOTING BRAKE, BEETLE, PASSAT ALLTRACK B8 1.0-2.5 01.11-

View part

FAG SUSPENSION Tie rod (with no end) 840 1228 10

Tie rod (with no end) L/R (length: 200mm) fits: CHEVROLET AVEO / KALOS DAEWOO KALOS, LANOS 1.2-1.6 02.97-

View part

FAG SUSPENSION Tie rod (with no end) 840 1229 10

Tie rod (with no end) L/R (length: 302mm) fits: SUBARU FORESTER, IMPREZA, LEGACY III, LEGACY IV, LEGACY OUTBACK, LEGACY V, OUTBACK, TRIBECA, WRX 1.5-3.6 01.96-

View part

FAG SUSPENSION Tie rod (with no end) 840 1230 10

Tie rod (with no end) L/R (length: 274mm) fits: MERCEDES C (C204), C T-MODEL (S204), C (W204), SLC (R172), SLK (R172) 1.6-6.3 02.08-

View part

FAG SUSPENSION Tie rod (with no end) 840 1231 10

Tie rod (with no end) L/R (length: 276mm) fits: OPEL MERIVA B 1.3D-1.7D 06.10-03.17

View part

FAG SUSPENSION Tie rod (with no end) 840 1232 10

Tie rod (with no end) L/R (length: 232mm) fits: TOYOTA AURIS, COROLLA 1.2-2.2D 10.06-12.18

View part

FAG SUSPENSION Tie rod (with no end) 840 1233 10

Tie rod (with no end) L/R (length: 237mm) fits: MERCEDES CLS (C218), CLS SHOOTING BRAKE (X218), E (C207), E T-MODEL (S212), E (W212), GLK (X204), S (A217), S (C217), S (W222 2.0-6.2 06.08-07.20

View part

FAG SUSPENSION Tie rod (with no end) 840 1234 10

Tie rod (with no end) L/R (length: 290mm) fits: CHEVROLET CRUZE, VOLT OPEL AMPERA, ASTRA H CLASSIC, ASTRA J, ASTRA J GTC 1.3D-2.0D 01.09-

View part

FAG SUSPENSION Tie rod end 840 1236 10

Tie rod end R fits: MERCEDES CLS (C218), CLS SHOOTING BRAKE (X218), E T-MODEL (S212), E (W212), GLK (X204) 2.0-5.5 06.08-12.17

View part

FAG SUSPENSION Tie rod end 840 1237 10

Tie rod end L fits: MERCEDES CLS (C218), CLS SHOOTING BRAKE (X218), E T-MODEL (S212), E (W212), GLK (X204) 2.0-5.5 06.08-12.17

View part

FAG SUSPENSION Tie rod end 840 1238 10

Tie rod end R fits: TOYOTA 4 RUNNER III, LAND CRUISER 90 2.7/3.0D/3.4 04.95-12.02

View part

FAG SUSPENSION Tie rod end 840 1239 10

Tie rod end L fits: TOYOTA 4 RUNNER III, LAND CRUISER 90 2.7/3.0D/3.4 04.95-12.02

View part

FAG SUSPENSION Tie rod end 840 1240 10

Tie rod end R fits: SEAT IBIZA IV, IBIZA IV SC, IBIZA IV ST, TOLEDO IV SKODA FABIA III, FABIA III PRAKTIK, RAPID VW POLO V 1.0-2.0D 03.08-12.22

View part

FAG SUSPENSION Tie rod end 840 1241 10

Tie rod end L fits: TOYOTA RAV 4 II 1.8-2.4 05.00-11.05

View part

FAG SUSPENSION Tie rod end 840 1242 10

Tie rod end R fits: TOYOTA RAV 4 II 1.8-2.4 05.00-11.05

View part

FAG SUSPENSION Tie rod end 840 1243 10

Tie rod end R fits: SUBARU TREZIA TOYOTA YARIS, YARIS / VIOS 1.0-1.8 01.05-

View part

FAG SUSPENSION Tie rod end 840 1244 10

Tie rod end R fits: MAZDA 2 1.3-1.6D 07.07-06.15

View part

FAG SUSPENSION Tie rod end 840 1245 10

Tie rod end L fits: SUBARU TREZIA TOYOTA YARIS, YARIS / VIOS 1.0-1.8 01.05-

View part

FAG SUSPENSION Tie rod end 840 1246 10

Tie rod end R fits: DAIHATSU CHARADE VIII SUBARU TREZIA TOYOTA YARIS, YARIS / VIOS 1.0-1.8 01.05-

View part

FAG SUSPENSION Tie rod end 840 1247 10

Tie rod end L fits: MAZDA 2 1.3-1.6D 07.07-06.15

View part

FAG SUSPENSION Tie rod end 840 1248 10

Tie rod end L fits: DAIHATSU CHARADE VIII SUBARU TREZIA TOYOTA YARIS, YARIS / VIOS 1.0-1.8 01.05-

View part

FAG SUSPENSION Tie rod (with no end) 840 1249 10

Tie rod (with no end) L/R fits: RENAULT 4, 6 0.8/1.1 10.62-06.90

View part

FAG SUSPENSION Tie rod (with end) 840 1250 10

Tie rod (with end) L (dł.367mm) fits: AUDI A1 SEAT IBIZA IV, IBIZA IV SC, IBIZA IV ST, TOLEDO IV SKODA FABIA III, RAPID VW POLO V 1.0-2.0D 03.08-05.22

View part

FAG SUSPENSION Tie rod (with end) 840 1251 10

Tie rod (with end) R (dł.367mm) fits: AUDI A1 SEAT IBIZA IV, IBIZA IV SC, IBIZA IV ST, TOLEDO IV SKODA FABIA III, RAPID VW POLO V 1.0-2.0D 03.08-05.22

View part

FAG SUSPENSION Tie rod end 840 1252 10

Tie rod end L fits: MERCEDES CLS (C218), CLS SHOOTING BRAKE (X218), E T-MODEL (S212), E (W212) 1.6-6.2 01.09-12.17

View part

FAG SUSPENSION Tie rod end 840 1253 10

Tie rod end R fits: MERCEDES CLS (C218), CLS SHOOTING BRAKE (X218), E T-MODEL (S212), E (W212) 1.6-6.2 01.09-12.17

View part

FAG SUSPENSION Tie rod (with no end) 840 1254 10

Tie rod (with no end) L/R (length: 204mm) fits: MERCEDES GL (X164), M (W164), R (W251, V251) 3.0-6.3 02.05-12.14

View part

FAG SUSPENSION Tie rod end 840 1255 10

Tie rod end L fits: MERCEDES GL (X164), M (W164) 3.0-6.3 02.05-12.12

View part

FAG SUSPENSION Tie rod end 840 1256 10

Tie rod end R fits: MERCEDES GL (X164), M (W164) 3.0-6.3 02.05-12.12

View part

FAG SUSPENSION Tie rod (with no end) 840 1257 10

Tie rod (with no end) L/R (length: 223mm) fits: MERCEDES A (W176), B SPORTS TOURER (W246, W242), CLA (C117), CLA SHOOTING BRAKE (X117), GLA (X156) 1.5D-Electric 11.11-12.19

View part

FAG SUSPENSION Tie rod (with no end) 840 1258 10

Tie rod (with no end) L/R (length: 245mm) fits: MERCEDES C (A205), C (C205), C T-MODEL (S205), C (W205), CLS (C257), E (A238), E (C238), E T-MODEL (S213), E (W213) 1.5-4.0 12.13-

View part

FAG SUSPENSION Tie rod end 840 1259 10

Tie rod end L fits: MERCEDES C (A205), C (C205), C T-MODEL (S205), C (W205), CLS (C257), E (A238), E (C238), E T-MODEL (S213), E (W213) 1.5-4.0 12.13-

View part

FAG SUSPENSION Tie rod end 840 1260 10

Tie rod end R fits: MERCEDES C (A205), C (C205), C T-MODEL (S205), C (W205), CLS (C257), E (A238), E (C238), E T-MODEL (S213), E (W213) 1.5-4.0 12.13-

View part

FAG SUSPENSION Tie rod end 840 1261 10

Tie rod end L fits: FIAT DOBLO, DOBLO CARGO OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, COMBO TOUR 1.3D-2.0D 01.10-

View part

FAG SUSPENSION Tie rod end 840 1262 10

Tie rod end R fits: FIAT DOBLO, DOBLO CARGO OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, COMBO TOUR 1.3D-2.0D 01.10-

View part

FAG SUSPENSION Tie rod (with no end) 840 1263 10

Tie rod (with no end) L/R (length: 201mm) fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE FIAT DOBLO, DOBLO FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.2-Electric 09.13-

View part

FAG SUSPENSION Tie rod (with no end) 840 1264 10

Tie rod (with no end) L/R (length: 330mm) fits: ALFA ROMEO GIULIETTA 1.4-2.0D 04.10-12.20

View part

FAG SUSPENSION Tie rod (with no end) 840 1265 10

Tie rod (with no end) L/R (length: 222mm) fits: DS DS 7, DS 9 CITROEN C4 GRAND PICASSO II, C4 PICASSO II, C4 SPACETOURER, C5 AIRCROSS, GRAND C4 SPACETOURER 1.2-2.0D 02.13-

View part

FAG SUSPENSION Tie rod end 840 1267 10

Tie rod end R fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, C4 GRAND PICASSO II, C4 PICASSO II, C4 SPACETOURER, C5 AIRCROSS, GRAND C4 SPACETOURER 1.2-Electric 02.13-

View part

FAG SUSPENSION Tie rod end 840 1268 10

Tie rod end L fits: MAZDA 6 1.8-2.5 08.07-07.13

View part

FAG SUSPENSION Tie rod end 840 1269 10

Tie rod end R fits: MAZDA 6 1.8-2.5 08.07-07.13

View part

FAG SUSPENSION Tie rod (with no end) 840 1270 10

Tie rod (with no end) L/R (length: 165mm) fits: MAZDA 6 1.8-2.5 08.07-07.13

View part

FAG SUSPENSION Tie rod (with no end) 840 1271 10

Tie rod (with no end) L/R (length: 340mm) fits: CITROEN C4 AIRCROSS MITSUBISHI ASX, ECLIPSE CROSS, LANCER VIII, OUTLANDER III PEUGEOT 4008 1.5-3.0 03.07-

View part

FAG SUSPENSION Tie rod (with no end) 840 1272 10

Tie rod (with no end) L/R (length: 244mm) fits: CHEVROLET SPARK 1.0-Electric 12.09-

View part

Buying with Partios

Buying FAG SUSPENSION parts through Partios

Are these genuine FAG SUSPENSION parts?

Yes. Every FAG SUSPENSION line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FAG SUSPENSION parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FAG SUSPENSION lines that aren't currently available.

Do you supply FAG SUSPENSION parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FAG SUSPENSION parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FAG SUSPENSION order?

It depends on the line. Stocked FAG SUSPENSION items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FAG SUSPENSION parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FAG SUSPENSION lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account