Partios Wholesale catalogue

FAG Suspension Distributor | Suspension & Steering

Wheel suspension track control arm, front (958) · Tie rod end (803) · Stabilizer link (665) · Front track control arm silent block (493) · Tie rod (with no end) (487) · Front ball joint (374) · Macpherson strut mount (315) · Stabilizer bar bushing (275) · 41 further part types (1,123)

5,360 current catalogue lines

About the FAG SUSPENSION range

FAG Suspension is a suspension & steering brand, and the range Partios carries reaches across 49 part types. The largest groups are wheel suspension track control arm, front (958), tie rod end (803), stabilizer link (665), front track control arm silent block (493) and tie rod (with no end) (487). Beyond those, 1,713 lines are spread across 43 further part types. That tail includes macPherson strut mount, stabilizer bar bushing and wheel suspension track control arm, rear. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 5,360 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

FAG SUSPENSION Tie rod (with no end) 840 0019 10

Tie rod (with no end) L/R (length: 240mm) fits: TOYOTA ECHO, PLATZ, YARIS, YARIS VERSO 1.0-1.5 04.99-11.05

View part

FAG SUSPENSION Tie rod (with no end) 840 0020 10

Tie rod (with no end) L/R (length: 133mm) fits: TOYOTA 4 RUNNER III, LAND CRUISER 90 2.7/3.0D/3.4 04.95-12.02

View part

FAG SUSPENSION Tie rod (with no end) 840 0022 10

Tie rod (with no end) L/R (length: 300mm) fits: MAZDA 323 III 1.1-1.7D 08.85-10.95

View part

FAG SUSPENSION Tie rod (with no end) 840 0024 10

Tie rod (with no end) L/R (length: 280mm) fits: MAZDA 626 II 1.6/2.0/2.0D 11.82-01.90

View part

FAG SUSPENSION Tie rod (with no end) 840 0025 10

Tie rod (with no end) L/R (length: 255mm) fits: MAZDA 626 II 1.6/2.0/2.0D 11.82-01.90

View part

FAG SUSPENSION Tie rod (with no end) 840 0028 10

Tie rod (with no end) L/R (length: 285mm) fits: MAZDA 626 III 1.6-2.2 06.87-09.97

View part

FAG SUSPENSION Tie rod (with no end) 840 0030 10

Tie rod (with no end) L/R (length: 325mm) fits: MAZDA 323 C IV, 323 F IV, 323 III, 323 S IV, MX-3 1.3-1.8 04.87-09.98

View part

FAG SUSPENSION Tie rod (with no end) 840 0031 10

Tie rod (with no end) L/R (length: 325mm) fits: MAZDA 323 C IV, 323 F IV, 323 S IV 1.3/1.8 09.89-07.94

View part

FAG SUSPENSION Tie rod (with no end) 840 0037 10

Tie rod (with no end) L/R (length: 280mm) fits: MAZDA DEMIO 1.3/1.5 08.98-07.03

View part

FAG SUSPENSION Tie rod (with no end) 840 0038 10

Tie rod (with no end) L/R (length: 333mm) fits: MAZDA MPV II 2.0-3.0 09.99-12.06

View part

FAG SUSPENSION Tie rod (with no end) 840 0039 10

Tie rod (with no end) L/R (length: 305mm) fits: MAZDA MX-5 I, MX-5 II 1.6/1.8 05.90-10.05

View part

FAG SUSPENSION Tie rod (with no end) 840 0040 10

Tie rod (with no end) L/R (length: 310mm) fits: MAZDA 323 F VI, 323 S VI, PREMACY 1.3-2.0D 05.98-03.05

View part

FAG SUSPENSION Tie rod (with no end) 840 0041 10

Tie rod (with no end) L/R (length: 210mm) fits: MAZDA XEDOS 9 2.0/2.3/2.5 07.93-09.02

View part

FAG SUSPENSION Tie rod (with no end) 840 0042 10

Tie rod (with no end) L/R (length: 335mm) fits: MAZDA 323 C V, 323 F V, 323 P V, 323 S V, MX-3 1.3-2.0D 05.91-12.98

View part

FAG SUSPENSION Tie rod (with no end) 840 0043 10

Tie rod (with no end) L/R (length: 335mm) fits: MAZDA 323 C V, 323 F V, 323 P V, 323 S V, MX-3 1.3-2.0D 05.91-12.98

View part

FAG SUSPENSION Tie rod (with no end) 840 0046 10

Tie rod (with no end) L/R (length: 325mm) fits: IVECO DAILY II, DAILY III, DAILY IV, DAILY V 2.3D-Electric 05.99-02.14

View part

FAG SUSPENSION Tie rod (with no end) 840 0047 10

Tie rod (with no end) L/R (length: 280mm) fits: MITSUBISHI COLT II, LANCER F, LANCER III, MIRAGE II 1.2-1.8D 03.83-06.92

View part

FAG SUSPENSION Tie rod (with no end) 840 0050 10

Tie rod (with no end) L/R (length: 315mm) fits: MITSUBISHI COLT IV, COLT V, LANCER IV, LANCER V, LANCER VI, LANCER VII, MIRAGE IV, MIRAGE V 1.3-2.0D 04.88-

View part

FAG SUSPENSION Tie rod (with no end) 840 0051 10

Tie rod (with no end) L/R (length: 295mm) fits: HYUNDAI H100 MITSUBISHI GALANT V, GALANT VI, SAPPORO III 1.6-2.6D 06.84-

View part

FAG SUSPENSION Tie rod (with no end) 840 0053 10

Tie rod (with no end) L/R (length: 233mm) fits: MITSUBISHI ECLIPSE, ECLIPSE I, ECLIPSE II, ECLIPSE III, GALANT IX, GALANT VII, GALANT VIII 1.8-3.8 04.91-

View part

FAG SUSPENSION Tie rod (with no end) 840 0054 10

Tie rod (with no end) L/R (length: 140mm) fits: HONDA ACCORD IV, ACCORD V ROVER 600 I 1.8-2.3 01.90-06.99

View part

FAG SUSPENSION Tie rod (with no end) 840 0055 10

Tie rod (with no end) L/R (length: 155mm) fits: HONDA CIVIC IV, CIVIC VI, CRX II 1.2-1.6 09.87-02.01

View part

FAG SUSPENSION Tie rod (with no end) 840 0057 10

Tie rod (with no end) L/R (length: 140mm) fits: HONDA ACCORD V 2.0/2.2/2.3 03.93-02.98

View part

FAG SUSPENSION Tie rod (with no end) 840 0058 10

Tie rod (with no end) L/R (length: 173mm) fits: HONDA CIVIC V, CIVIC VI, CRX III, INTEGRA ROVER 400 II, 45 I 1.3-2.0D 10.91-05.05

View part

FAG SUSPENSION Tie rod (with no end) 840 0059 10

Tie rod (with no end) L (length: 230mm) fits: BMW 3 (E30) 1.6-2.7 09.82-06.94

View part

FAG SUSPENSION Tie rod (with no end) 840 0060 10

Tie rod (with no end) R (length: 230mm) fits: BMW 3 (E30) 1.6-2.7 09.82-06.94

View part

FAG SUSPENSION Tie rod (with no end) 840 0061 10

Tie rod (with no end) L/R (length: 300mm) fits: HONDA LOGO 1.3 03.99-03.02

View part

FAG SUSPENSION Tie rod (with no end) 840 0062 10

Tie rod (with no end) L/R (length: 307mm) fits: HONDA HR-V 1.6 03.99-09.05

View part

FAG SUSPENSION Tie rod (with no end) 840 0065 10

Tie rod (with no end) L/R (length: 126mm) fits: HONDA LEGEND III, LEGEND IV, PRELUDE III, PRELUDE IV, PRELUDE V 2.0-3.5 04.86-12.12

View part

FAG SUSPENSION Tie rod (with no end) 840 0067 10

Tie rod (with no end) L/R (length: 280mm) fits: LANCIA KAPPA 2.0-3.0 08.94-10.01

View part

FAG SUSPENSION Tie rod (with no end) 840 0069 10

Tie rod (with no end) L/R (length: 317mm) fits: CITROEN C8 FIAT ULYSSE LANCIA PHEDRA PEUGEOT 807 2.0-3.0 06.02-

View part

FAG SUSPENSION Tie rod (with no end) 840 0070 10

Tie rod (with no end) L/R (length: 175mm) fits: BMW 5 (E39), Z8 (E52) 2.0-4.9 09.95-05.04

View part

FAG SUSPENSION Tie rod (with no end) 840 0071 10

Tie rod (with no end) L/R (length: 270mm) fits: SUBARU JUSTY II SUZUKI SWIFT, SWIFT II 1.0/1.3/1.6 03.89-12.05

View part

FAG SUSPENSION Tie rod (with no end) 840 0072 10

Tie rod (with no end) L/R (length: 310mm) fits: SUZUKI BALENO 1.3-1.9D 07.95-05.02

View part

FAG SUSPENSION Tie rod (with no end) 840 0073 10

Tie rod (with no end) L/R (length: 205mm) fits: BMW 3 (E46), Z4 (E85), Z4 (E86) 1.6-3.2 12.97-02.09

View part

FAG SUSPENSION Tie rod (with no end) 840 0075 10

Tie rod (with no end) L/R (length: 226mm) fits: SUZUKI GRAND VITARA I 1.6-2.7 03.98-09.05

View part

FAG SUSPENSION Tie rod (with no end) 840 0077 10

Tie rod (with no end) L/R (length: 298mm) fits: SEAT CORDOBA, CORDOBA VARIO, IBIZA II, IBIZA III SKODA FABIA I, FABIA I PRAKTIK, FABIA II, ROOMSTER, ROOMSTER PRAKTIK VW FOX, POLO IV 1.0-2.0 08.96-

View part

FAG SUSPENSION Tie rod (with no end) 840 0078 10

Tie rod (with no end) L/R (length: 250mm) fits: BMW 7 (E65, E66, E67) 3.0-6.0 07.01-12.09

View part

FAG SUSPENSION Tie rod (with no end) 840 0079 10

Tie rod (with no end) L/R (length: 320mm) fits: SKODA FELICIA CUBE, FELICIA I, FELICIA II VW CADDY II 1.3/1.6/1.9D 10.94-04.02

View part

FAG SUSPENSION Tie rod (with no end) 840 0080 10

Tie rod (with no end) L/R (length: 350mm) fits: SKODA FELICIA CUBE, FELICIA I, FELICIA II 1.3/1.6/1.9D 10.94-04.02

View part

FAG SUSPENSION Tie rod (with no end) 840 0081 10

Tie rod (with no end) L/R (length: 266mm) fits: BMW 3 (E21) 1.6-2.3 06.75-03.84

View part

FAG SUSPENSION Tie rod (with no end) 840 0083 10

Tie rod (with no end) L/R (length: 258mm) fits: BMW 3 (E21) 1.6-2.3 06.75-03.84

View part

FAG SUSPENSION Tie rod (with no end) 840 0087 10

Tie rod (with no end) L/R (length: 296mm) fits: DAIHATSU TERIOS 1.3-1.5LPG 05.97-12.18

View part

FAG SUSPENSION Tie rod (with no end) 840 0091 10

Tie rod (with no end) L/R (length: 295mm) fits: SUBARU FORESTER, IMPREZA, LEGACY I, LEGACY II, LEGACY III, LEGACY OUTBACK, OUTBACK 1.5-3.0 01.89-06.09

View part

FAG SUSPENSION Tie rod (with no end) 840 0092 10

Tie rod (with no end) L/R (length: 195mm) fits: MERCEDES A (W168) 1.4-2.1 07.97-08.04

View part

FAG SUSPENSION Tie rod (with no end) 840 0096 10

Tie rod (with no end) L/R (length: 320mm) fits: HYUNDAI COUPE II, HIGHWAY, MATRIX, SANTA FÉ I, SONATA III, TRAJET 1.5D-3.0 05.93-08.10

View part

FAG SUSPENSION Tie rod (with no end) 840 0097 10

Tie rod (with no end) L/R (length: 240mm) fits: MERCEDES E T-MODEL (S210), E (VF210), E (W210) 2.0-5.4 06.95-03.03

View part

FAG SUSPENSION Tie rod (with no end) 840 0099 10

Tie rod (with no end) L/R (length: 297mm) fits: HYUNDAI ACCENT, ACCENT I, GRACE, H-1, H-1 / STAREX, H100, LANTRA I, PONY, PONY / EXCEL, S MITSUBISHI GALANT V, GALANT VI 1.3-3.0 01.84-

View part

Buying with Partios

Buying FAG SUSPENSION parts through Partios

Are these genuine FAG SUSPENSION parts?

Yes. Every FAG SUSPENSION line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FAG SUSPENSION parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FAG SUSPENSION lines that aren't currently available.

Do you supply FAG SUSPENSION parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FAG SUSPENSION parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FAG SUSPENSION order?

It depends on the line. Stocked FAG SUSPENSION items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FAG SUSPENSION parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FAG SUSPENSION lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account