Partios Wholesale catalogue
FAG Suspension Distributor | Suspension & Steering
Wheel suspension track control arm, front (958) · Tie rod end (803) · Stabilizer link (665) · Front track control arm silent block (493) · Tie rod (with no end) (487) · Front ball joint (374) · Macpherson strut mount (315) · Stabilizer bar bushing (275) · 41 further part types (1,123)
5,360 current catalogue lines
About the FAG SUSPENSION range
FAG Suspension is a suspension & steering brand, and the range Partios carries reaches across 49 part types. The largest groups are wheel suspension track control arm, front (958), tie rod end (803), stabilizer link (665), front track control arm silent block (493) and tie rod (with no end) (487). Beyond those, 1,713 lines are spread across 43 further part types. That tail includes macPherson strut mount, stabilizer bar bushing and wheel suspension track control arm, rear. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 5,360 lines on the catalogue, most common applications in this area are covered without needing a second source.
Catalogue products
Vehicle references are indicative — confirm against the article number.
FAG SUSPENSION Rear wishbone assembly 823 0003 30
Rear suspension track control arm set fits: FORD C-MAX, FOCUS C-MAX, FOCUS I, FOCUS II 1.4-2.0D 10.98-09.12
View partFAG SUSPENSION Rear wishbone assembly 823 0004 30
Rear suspension track control arm set fits: BMW 5 (E60), 5 (E61) 2.0-5.0 12.01-12.10
View partFAG SUSPENSION Front wishbone assembly 823 0006 30
Suspension track control arm set front fits: MERCEDES C (CL203), C T-MODEL (S203), C (W203), CLC (CL203), CLK (A209), CLK (C209), CLS (C219), E T-MODEL (S211), E (W211) 1.6-5.5 10.98-06.11
View partFAG SUSPENSION Front wishbone assembly 823 0018 30
Suspension track control arm set front fits: PEUGEOT 206, 206+ 1.1-2.0D 08.98-
View partFAG SUSPENSION Front wishbone assembly 823 0036 30
Suspension track control arm set front fits: AUDI A4 B5, A4 B6, A6 C5 SKODA SUPERB I VW PASSAT B5, PASSAT B5.5 1.6-4.2 11.94-03.08
View partFAG SUSPENSION Wheel suspension track control arm, front 824 0003 30
Front axle track control arm L bottom front 15 mm (with ball joint with silentblock) fits: SEAT CORDOBA, IBIZA III SKODA FABIA I, FABIA I PRAKTIK, FABIA II, ROOMSTER 1.0-2.0 08.99-
View partFAG SUSPENSION Wheel suspension track control arm, front 824 0004 30
Front axle track control arm R front 15 mm (with ball joint with silentblock) fits: SEAT CORDOBA, IBIZA III SKODA FABIA I, FABIA I PRAKTIK, FABIA II, ROOMSTER, ROOMSTER PRAKTIK 1.0-2.0 08.99-
View partFAG SUSPENSION Wheel suspension track control arm, front 824 0005 30
Front axle track control arm L front fits: BMW 3 (E46), Z4 (E85), Z4 (E86) 1.6-3.2 12.97-02.09
View partFAG SUSPENSION Wheel suspension track control arm, front 824 0006 30
Front axle track control arm R front fits: BMW 3 (E46), Z4 (E85), Z4 (E86) 1.6-3.0D 12.97-02.09
View partFAG SUSPENSION Control arm repair kit 824 0007 30
Control arm repair kit front L/R fits: MERCEDES SL (R107) 2.9/4.1/4.9 09.85-08.89
View partFAG SUSPENSION Control arm repair kit 824 0008 30
Control arm repair kit front L/R fits: MERCEDES 123 (C123), 123 T-MODEL (S123), 123 (W123) 2.0-3.0D 01.76-12.85
View partFAG SUSPENSION Control arm repair kit 824 0009 30
Control arm repair kit front L/R fits: MERCEDES 124 (A124), 124 (C124), 124 T-MODEL (S124), 124 (W124), 190 (W201), E (A124), E (C124), E T-MODEL (S124), E (W124), SL (R129) 1.8-7.3 10.82-12.01
View partFAG SUSPENSION Control arm repair kit 824 0011 30
Control arm repair kit front L/R fits: MERCEDES 190 (W201) 1.8-2.5D 10.82-08.93
View partFAG SUSPENSION Control arm repair kit 824 0012 30
Control arm repair kit front L/R fits: MERCEDES 190 (W201), E (A124), E (C124), E T-MODEL (S124), E (W124), SL (R129) 2.0-7.3 04.84-12.01
View partFAG SUSPENSION Control arm repair kit 824 0013 30
Control arm repair kit front L/R fits: MERCEDES S (C140), S (W140) 2.8-6.0 02.91-12.99
View partFAG SUSPENSION Control arm repair kit 824 0014 30
Control arm repair kit front L/R fits: MERCEDES /8 (W114), /8 (W115), SL (C107), SL (R107) 2.0-4.9 01.68-08.89
View partFAG SUSPENSION Control arm repair kit 824 0015 30
Control arm repair kit front L/R fits: MERCEDES C T-MODEL (S202), C (W202) 1.8-4.3 03.93-03.01
View partFAG SUSPENSION Control arm repair kit 824 0016 30
Control arm repair kit front L/R fits: MERCEDES E T-MODEL (S210), E (W210) 2.0-5.4 06.95-03.03
View partFAG SUSPENSION Control arm repair kit 824 0017 30
Control arm repair kit rear L/R fits: BMW 1500-2000 (115, 116, 118, 121), 1502-2002 (E10), 2000 (120), 2500-3.3 (E3), 2.5-3.2 (E9), 3 (E21), 3 (E30), 3 (E36), 5 (E12), 5 (E28) 1.5-3.5 10.62-06.03
View partFAG SUSPENSION Control arm repair kit 824 0018 30
Control arm repair kit front L/R (track control arm type: transverse) fits: BMW 3 (E46), Z4 (E85), Z4 (E86) 1.6-3.2 12.97-02.09
View partFAG SUSPENSION Front ball joint 825 0001 10
Axle ball joint L/R (bottom front) (cone diameter 16,9 42mm) fits: NISSAN MAXIMA / MAXIMA QX IV 2.0/2.5/3.0 01.95-12.00
View partFAG SUSPENSION Front ball joint 825 0002 10
Axle ball joint L/R (bottom front) (cone diameter 15,2mm) fits: NISSAN ALMERA II, ALMERA TINO, MAXIMA / MAXIMA QX V, PRIMERA VW TOUAREG 1.6-3.5 03.00-
View partFAG SUSPENSION Front ball joint 825 0003 10
Axle ball joint L/R (bottom front) (cone diameter 16mm) fits: TOYOTA CAMRY, MR2 I, MR2 II 1.6-2.5 10.82-05.00
View partFAG SUSPENSION Front ball joint 825 0005 10
Axle ball joint L/R (bottom front) (cone diameter 15,8mm) fits: TOYOTA CARINA V, CELICA, COROLLA 1.3-2.0D 08.85-10.95
View partFAG SUSPENSION Front ball joint 825 0006 10
Axle ball joint L/R (bottom front) (cone diameter 15mm) fits: TOYOTA 4 RUNNER II, AVENSIS, CARINA E VI, CELICA, COROLLA, HILUX IV, HILUX V, HILUX VI, PICNIC 1.3-3.0D 11.85-07.05
View partFAG SUSPENSION Front ball joint 825 0007 10
Axle ball joint L/R (bottom front) (cone diameter 14,3mm) fits: TOYOTA STARLET 1.0/1.3/1.5D 10.84-12.89
View partFAG SUSPENSION Front ball joint 825 0008 10
Axle ball joint L/R (top front) (cone diameter 17,2mm) fits: TOYOTA DYNA 100, HIACE IV 1.8-2.4D 08.87-12.04
View partFAG SUSPENSION Front ball joint 825 0009 10
Axle ball joint L (bottom front) (cone diameter 13,5mm) fits: TOYOTA PASEO, STARLET 1.0-1.5D 12.89-07.99
View partFAG SUSPENSION Front ball joint 825 0010 10
Axle ball joint L/R (bottom front) (cone diameter 14,3mm) fits: TOYOTA MR2 I, MR2 II, TERCEL 1.3-2.0 03.79-05.00
View partFAG SUSPENSION Front ball joint 825 0011 10
Axle ball joint L/R (bottom front) (cone diameter 18mm) fits: TOYOTA HIACE III, HIACE IV 1.8-2.7 12.82-12.12
View partFAG SUSPENSION Front ball joint 825 0012 10
Axle ball joint L/R (bottom front) fits: TOYOTA CAMRY, SIENNA 2.2/3.0 06.91-12.02
View partFAG SUSPENSION Front ball joint 825 0013 10
Axle ball joint L/R (bottom front) fits: TOYOTA CELICA, COROLLA, COROLLA VERSO, PRIUS, PRIUS PHV, RAV 4 II, YARIS CROSS 1.2-2.4 05.92-
View partFAG SUSPENSION Front ball joint 825 0014 10
Axle ball joint L/R (top front) fits: TOYOTA 4 RUNNER III, LAND CRUISER 90 2.7/3.0D/3.4 04.95-12.02
View partFAG SUSPENSION Front ball joint 825 0015 10
Axle ball joint L/R (top front) fits: TOYOTA 4 RUNNER I, 4 RUNNER II, HILUX IV, HILUX V, HILUX VI VW TARO 1.8-3.4 08.83-10.05
View partFAG SUSPENSION Front ball joint 825 0016 10
Axle ball joint L/R (bottom front) fits: TOYOTA CELICA, RAV 4 I 1.6/2.0 09.89-06.00
View partFAG SUSPENSION Front ball joint 825 0018 10
Axle ball joint L/R (bottom front) (cone diameter 16mm) fits: MAZDA 323 C IV, 323 C V, 323 F IV, 323 F V, 323 P V, 323 S IV, 323 S V, MX-3 1.3-2.0D 04.87-09.98
View partFAG SUSPENSION Front ball joint 825 0020 10
Axle ball joint L/R (bottom front) (cone diameter 18 42,5mm) fits: VOLVO XC60 I FORD MAVERICK FORD USA PROBE II HYUNDAI I40 I CW KIA CLARUS MAZDA 3, 323 F VI, 323 S VI, 5 1.3-3.0 11.82-
View partFAG SUSPENSION Front ball joint 825 0021 10
Axle ball joint L/R (bottom front) (cone diameter 18mm) fits: MAZDA 323 C IV, 323 C V, 323 F IV, 323 F V, 323 P V, 323 S IV, 323 S V, MX-3 1.3-2.0D 08.89-12.98
View partFAG SUSPENSION Front ball joint 825 0025 10
Axle ball joint L/R (top front) (cone diameter 14,9mm) fits: LADA 1200-1500, 1200-1600, NADESCHDA, NIVA, NIVA TRAVEL, NOVA 1.2-1.9D 01.70-
View partFAG SUSPENSION Front ball joint 825 0026 10
Axle ball joint L/R (bottom front) (cone diameter 14,9mm) fits: LADA 1200-1500, 1200-1600, NADESCHDA, NIVA, NIVA TRAVEL, NOVA 1.2-1.9D 01.70-
View partFAG SUSPENSION Front ball joint 825 0027 10
Axle ball joint L/R (bottom front) (cone diameter 13,4mm) fits: LADA 110, 111, 112, GRANTA, KALINA, KALINA II, PRIORA, SAMARA 1.1-2.0 01.86-
View partFAG SUSPENSION Front ball joint 825 0028 10
Axle ball joint L/R (top front) (cone diameter 16,4 40,2mm) fits: HYUNDAI GALLOPER II MITSUBISHI L 300 / DELICA II, PAJERO I 1.6-3.0 05.80-12.03
View partFAG SUSPENSION Front ball joint 825 0029 10
Axle ball joint L/R (bottom front) (cone diameter 19,5mm) fits: HYUNDAI GALLOPER II MITSUBISHI L200, PAJERO I 2.0-3.0 12.82-12.03
View partFAG SUSPENSION Front ball joint 825 0030 10
Axle ball joint L/R (top front) (cone diameter 18mm) fits: MITSUBISHI L200, PAJERO CLASSIC, PAJERO II, PAJERO III, PAJERO PININ I, PAJERO SPORT I 1.8-3.5 12.90-
View partFAG SUSPENSION Front ball joint 825 0031 10
Axle ball joint L (bottom front) fits: MITSUBISHI L200, PAJERO CLASSIC, PAJERO II, PAJERO SPORT I 1.8-3.5 12.90-
View partFAG SUSPENSION Front ball joint 825 0032 10
Axle ball joint R (bottom front) (cone diameter 22mm) fits: MITSUBISHI L200, PAJERO CLASSIC, PAJERO II, PAJERO SPORT I 1.8-3.5 12.90-
View partFAG SUSPENSION Front ball joint 825 0033 10
Axle ball joint L/R (bottom/top front) (cone diameter 17,7mm) fits: HYUNDAI H-1, H-1 / STAREX, H100 MITSUBISHI DELICA / SPACE GEAR, L 300 III, L400 1.6-2.8D 08.86-
View partFAG SUSPENSION Front ball joint 825 0034 10
Axle ball joint L/R (bottom front) fits: HYUNDAI GRACE, H100 MITSUBISHI L 300 III 1.6-2.6D 11.86-
View partBuying with Partios
Buying FAG SUSPENSION parts through Partios
Are these genuine FAG SUSPENSION parts?
- Yes. Every FAG SUSPENSION line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source FAG SUSPENSION parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FAG SUSPENSION lines that aren't currently available.
Do you supply FAG SUSPENSION parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on FAG SUSPENSION parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a FAG SUSPENSION order?
- It depends on the line. Stocked FAG SUSPENSION items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for FAG SUSPENSION parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some FAG SUSPENSION lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account