Partios Wholesale catalogue

FAG Suspension Distributor | Suspension & Steering

Wheel suspension track control arm, front (958) · Tie rod end (803) · Stabilizer link (665) · Front track control arm silent block (493) · Tie rod (with no end) (487) · Front ball joint (374) · Macpherson strut mount (315) · Stabilizer bar bushing (275) · 41 further part types (1,123)

5,501 current catalogue lines

About the FAG SUSPENSION range

FAG Suspension is a suspension & steering brand, and the range Partios carries reaches across 49 part types. The largest groups are wheel suspension track control arm, front (958), tie rod end (803), stabilizer link (665), front track control arm silent block (493) and tie rod (with no end) (487). Beyond those, 1,713 lines are spread across 43 further part types. That tail includes macPherson strut mount, stabilizer bar bushing and wheel suspension track control arm, rear. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 5,501 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

FAG SUSPENSION Stabilizer bar bushing 819 0277 10

Stabilizer bar bushing front L/R (24,5mm) fits: OPEL MOVANO A RENAULT MASTER II 1.9D-3.0D 12.97-

View part

FAG SUSPENSION Stabilizer bar bushing 819 0280 10

Stabilizer bar bushing rear L/R (11mm) fits: DACIA DUSTER RENAULT DUSTER 1.2-2.0 06.10-

View part

FAG SUSPENSION Stabilizer bar bushing 819 0282 10

Stabilizer bar bushing front L/R (22,5mm) fits: HYUNDAI NEXO, TUCSON KIA OPTIMA, SPORTAGE IV 1.6-Electric 06.15-

View part

FAG SUSPENSION Stabilizer bar bushing 819 0283 10

Stabilizer bar bushing front L/R (22mm) fits: HYUNDAI TUCSON KIA OPTIMA, SPORTAGE IV, SPORTAGE V 1.6-2.4 06.15-

View part

FAG SUSPENSION Stabilizer bar bushing 819 0284 10

Stabilizer bar bushing front/rear L/R (21mm) fits: HYUNDAI ELANTRA VI, GRAND SANTA FÉ, I20 ACTIVE, I20 II, I20 III, I30, IONIQ, KONA, SANTA FÉ III, TUCSON KIA CARENS IV, CEE'D 1.0-Electric 11.11-

View part

FAG SUSPENSION Tie rod repair kit 820 0001 30

Tie rod repair kit fits: MERCEDES 190 (W201) 1.8-2.6 10.82-08.93

View part

FAG SUSPENSION Stabilizer link repair kit 820 0002 30

Link stabilizer repair kit front L/R fits: MERCEDES 124 (C124), 124 T-MODEL (S124), 124 (W124), 190 (W201), E (A124), E (C124), E T-MODEL (S124), E (W124) 2.0-2.5D 12.84-03.98

View part

FAG SUSPENSION Tie rod repair kit 820 0003 30

Tie rod repair kit fits: MERCEDES 124 (C124), 124 T-MODEL (S124), 124 (W124), E (A124), E (C124), E T-MODEL (S124), E (W124) 2.0-2.3 12.84-03.98

View part

FAG SUSPENSION Tie rod repair kit 820 0004 30

Tie rod repair kit fits: MERCEDES 124 (A124), 124 (C124), 124 T-MODEL (S124), 124 (W124), E (A124), E (C124), E T-MODEL (S124), E (W124) 2.5D-6.0 12.84-03.98

View part

FAG SUSPENSION Stabilizer link repair kit 820 0005 30

Link stabilizer repair kit front L/R fits: MERCEDES /8 (W114), /8 (W115), SL (C107), SL (R107) 2.0-4.9 01.68-08.89

View part

FAG SUSPENSION Stabilizer bar bushing 820 0006 30

Stabilizer bar bushing front L/R (12mm) fits: ABARTH RITMO FIAT RITMO 1.1-2.0 11.81-12.87

View part

FAG SUSPENSION Stabilizer bar bushing 820 0007 30

Stabilizer bar bushing front L/R (12mm) fits: FIAT RITMO 1.1 10.82-12.87

View part

FAG SUSPENSION Stabilizer link repair kit 820 0008 30

Link stabilizer repair kit front L/R (14mm) fits: SEAT IBIZA I, MALAGA, RONDA 0.9-1.7D 06.82-12.93

View part

FAG SUSPENSION Stabilizer bar bushing 820 0010 30

Stabilizer bar bushing front L/R (23mm) fits: FIAT TALENTO NISSAN NV300, PRIMASTAR OPEL VIVARO A, VIVARO B RENAULT TRAFIC II, TRAFIC III 1.6D-2.5D 02.01-

View part

FAG SUSPENSION Stabilizer link repair kit 820 0011 30

Link stabilizer repair kit front L/R (25mm) fits: CITROEN JUMPER III, JUMPY II FIAT DUCATO, SCUDO PEUGEOT BOXER, EXPERT, EXPERT TEPEE TOYOTA PROACE 1.6D-Electric 04.06-

View part

FAG SUSPENSION Stabilizer link repair kit 820 0012 30

Link stabilizer repair kit fits: MERCEDES SPRINTER 3,5-T (B906) 1.8-3.5 06.06-09.20

View part

FAG SUSPENSION Stabilizer link repair kit 820 0013 30

Link stabilizer repair kit (16mm) fits: MERCEDES SPRINTER 3,5-T (B906), SPRINTER 3,5-T (B907), SPRINTER 3,5-T (B907, B910), SPRINTER 3-T (B906), SPRINTER 4-T (B907) 1.8-3.5 06.06-

View part

FAG SUSPENSION Stabilizer link repair kit 820000930

Link stabilizer repair kit

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0001 10

Front axle track control arm top 13,5 mm fits: MITSUBISHI ECLIPSE I, ECLIPSE II, GALANT VII, GALANT VIII 1.8-2.5 04.91-10.04

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0002 10

Front axle track control arm bottom 15 mm fits: MITSUBISHI ECLIPSE I, ECLIPSE II, GALANT VII, GALANT VIII 1.8-2.5 04.91-10.04

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0003 10

Front axle track control arm bottom 15 mm fits: MITSUBISHI ECLIPSE I, ECLIPSE II, GALANT VII, GALANT VIII 1.8-2.5 04.91-10.04

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0004 10

Front axle track control arm bottom 15 mm fits: MITSUBISHI ECLIPSE I, ECLIPSE II, GALANT VII, GALANT VIII 1.8-2.5 04.91-10.04

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0005 10

Front axle track control arm bottom 15 mm fits: MITSUBISHI ECLIPSE I, ECLIPSE II, GALANT VII, GALANT VIII 1.8-2.5 04.91-10.04

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0006 10

Front axle track control arm L bottom front fits: HYUNDAI GRACE, H100 MITSUBISHI L 300 III 1.6-2.6D 08.86-

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0007 10

Front axle track control arm bottom fits: HYUNDAI GRACE, H100 MITSUBISHI DELICA / SPACE GEAR, L 300 III 1.6-2.6D 08.86-

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0008 10

Front axle track control arm top 12,7 mm fits: HONDA ACCORD IV 1.8/2.0/2.2 01.90-12.93

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0009 10

Front axle track control arm top 12,7 mm fits: HONDA ACCORD IV 1.8/2.0/2.2 01.90-12.93

View part

FAG SUSPENSION Wheel suspension track control arm, rear 821 0012 10

Rear axle track control arm (top, rear, longitudinal) fits: HONDA ACCORD IV, ACCORD V ROVER 600 I 1.8-2.3 01.90-06.99

View part

FAG SUSPENSION Wheel suspension track control arm, rear 821 0013 10

Rear axle track control arm (top, rear, longitudinal) fits: HONDA ACCORD IV, ACCORD V ROVER 600 I 1.8-2.3 01.90-06.99

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0014 10

Front axle track control arm L top front 12,7 mm fits: HONDA ACCORD V, SHUTTLE ROVER 600 I 1.8-2.3 03.93-06.04

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0015 10

Front axle track control arm R top front 12,7 mm fits: HONDA ACCORD V, SHUTTLE ROVER 600 I 1.8-2.3 03.93-06.04

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0016 10

Front axle track control arm bottom fits: HONDA ACCORD V ROVER 600 I 1.8-2.3 03.93-06.99

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0017 10

Front axle track control arm bottom fits: HONDA ACCORD V ROVER 600 I 1.8-2.3 03.93-06.99

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0018 10

Front axle track control arm L top front 12,7 mm fits: HONDA ACCORD VI 1.6-3.0 03.97-06.03

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0019 10

Front axle track control arm R top front 12,7 mm fits: HONDA ACCORD VI 1.6-3.0 03.97-06.03

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0020 10

Front axle track control arm bottom fits: HONDA ACCORD VI 1.6-3.0 03.97-06.03

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0021 10

Front axle track control arm bottom 15,5 mm fits: HONDA ACCORD VI 1.6-3.0 03.97-06.03

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0023 10

Front axle track control arm R top front 12,7 mm fits: HONDA CIVIC IV, CRX II 1.2-1.6 09.87-02.95

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0024 10

Front axle track control arm L bottom front fits: HONDA CIVIC IV, CRX II 1.2-1.6 09.87-02.95

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0025 10

Front axle track control arm R bottom front fits: HONDA CIVIC IV, CRX II 1.2-1.6 09.87-02.95

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0026 10

Front axle track control arm L top front 12,7 mm fits: HONDA CIVIC V, CIVIC VI, CRX III ROVER 400 II, 45 I 1.3-2.0D 10.91-05.05

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0027 10

Front axle track control arm top 12,7 mm fits: HONDA CIVIC V, CIVIC VI, CRX III ROVER 400 II, 45 I 1.3-2.0D 10.91-05.05

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0028 10

Front axle track control arm bottom fits: HONDA CIVIC V, CIVIC VI, CRX III ROVER 400 II, 45 I 1.3-2.0D 10.91-05.05

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0029 10

Front axle track control arm bottom fits: HONDA CIVIC V, CIVIC VI, CRX III ROVER 400 II, 45 I 1.3-2.0D 10.91-05.05

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0032 10

Front axle track control arm bottom 14 mm fits: HONDA CIVIC VI 1.4-1.6 10.95-03.01

View part

FAG SUSPENSION Wheel suspension track control arm, front 821 0033 10

Front axle track control arm bottom 14 mm fits: HONDA CIVIC VI 1.4-1.6 06.95-03.01

View part

FAG SUSPENSION Wheel suspension track control arm, rear 821 0034 10

Rear axle track control arm (top, rear, transverse) fits: HONDA CIVIC V, CIVIC VI, CR-V I, CRX III, INTEGRA 1.3-2.0D 10.91-02.02

View part

FAG SUSPENSION Wheel suspension track control arm, rear 821 0035 10

Rear axle track control arm R (top, rear, transverse) fits: HONDA CIVIC V, CIVIC VI, CR-V I, CRX III, INTEGRA 1.3-2.0D 10.91-02.02

View part

Buying with Partios

Buying FAG SUSPENSION parts through Partios

Are these genuine FAG SUSPENSION parts?

Yes. Every FAG SUSPENSION line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FAG SUSPENSION parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FAG SUSPENSION lines that aren't currently available.

Do you supply FAG SUSPENSION parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FAG SUSPENSION parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FAG SUSPENSION order?

It depends on the line. Stocked FAG SUSPENSION items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FAG SUSPENSION parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FAG SUSPENSION lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account