Partios Wholesale catalogue

FAG Suspension Distributor | Suspension & Steering

Wheel suspension track control arm, front (958) · Tie rod end (803) · Stabilizer link (665) · Front track control arm silent block (493) · Tie rod (with no end) (487) · Front ball joint (374) · Macpherson strut mount (315) · Stabilizer bar bushing (275) · 41 further part types (1,123)

5,501 current catalogue lines

About the FAG SUSPENSION range

FAG Suspension is a suspension & steering brand, and the range Partios carries reaches across 49 part types. The largest groups are wheel suspension track control arm, front (958), tie rod end (803), stabilizer link (665), front track control arm silent block (493) and tie rod (with no end) (487). Beyond those, 1,713 lines are spread across 43 further part types. That tail includes macPherson strut mount, stabilizer bar bushing and wheel suspension track control arm, rear. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 5,501 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

FAG SUSPENSION Stabilizer bar bushing 819 0126 10

Stabilizer bar bushing front L/R (16mm) fits: AUDI A2 SEAT CORDOBA, IBIZA III, IBIZA IV, IBIZA IV SC, IBIZA IV ST, MII SKODA CITIGO, E-CITIGO, FABIA I, FABIA I PRAKTIK, FABIA II 1.0-Electric 08.99-

View part

FAG SUSPENSION Stabilizer bar bushing 819 0127 10

Stabilizer bar bushing rear L/R (11mm) fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93) 1.6-3.0 06.04-12.13

View part

FAG SUSPENSION Stabilizer bar bushing 819 0128 10

Stabilizer bar bushing front L/R (24mm) fits: OPEL ASTRA H, ASTRA H GTC, MERIVA B, SIGNUM, VECTRA C, VECTRA C GTS, ZAFIRA B, ZAFIRA B FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.2-3.2 04.02-03.17

View part

FAG SUSPENSION Stabilizer bar bushing 819 0129 10

Stabilizer bar bushing rear inner L/R (22mm) fits: PEUGEOT 406 1.6-3.0 11.95-12.04

View part

FAG SUSPENSION Stabilizer bar bushing 819 0130 10

Stabilizer bar bushing front inner L/R (22mm) fits: CITROEN C4, C4 GRAND PICASSO I, C4 I, C4 II, C4 PICASSO I, DS4 PEUGEOT 307, 308, 308 I 1.2-2.0D 08.00-

View part

FAG SUSPENSION Stabilizer bar bushing 819 0131 10

Stabilizer bar bushing front L/R (18mm) fits: PEUGEOT 206 1.1-1.9D 08.98-12.12

View part

FAG SUSPENSION Stabilizer bar bushing 819 0132 10

Stabilizer bar bushing front L/R (20mm) fits: PEUGEOT 205, 205 I, 205 II, 309 I 1.0-1.9D 02.83-09.98

View part

FAG SUSPENSION Stabilizer bar bushing 819 0133 10

Stabilizer bar bushing front L/R (22mm) fits: PEUGEOT 205, 205 I, 205 II, 309 I 1.0-1.9D 02.83-09.98

View part

FAG SUSPENSION Stabilizer bar bushing 819 0135 10

Stabilizer bar bushing rear L/R (18mm) fits: FORD COUGAR, MONDEO I, MONDEO II 1.6-2.5 01.93-12.01

View part

FAG SUSPENSION Stabilizer bar bushing 819 0136 10

Stabilizer bar bushing front L/R (22mm) fits: OPEL ASTRA G, ASTRA H, ASTRA H CLASSIC, ZAFIRA A 1.3D-2.2D 03.01-05.14

View part

FAG SUSPENSION Stabilizer bar bushing 819 0137 10

Stabilizer bar bushing rear L/R (16mm) fits: FORD MONDEO I, MONDEO II 1.6-2.5 01.93-09.00

View part

FAG SUSPENSION Stabilizer bar bushing 819 0138 10

Stabilizer bar bushing front L/R (25mm) fits: HONDA ACCORD IV, ACCORD V, PRELUDE IV, PRELUDE V ROVER 600 I 1.8-2.3 01.90-12.01

View part

FAG SUSPENSION Stabilizer bar bushing 819 0139 10

Stabilizer bar bushing rear L/R (20mm) fits: ALFA ROMEO 166 2.0-3.2 09.98-06.07

View part

FAG SUSPENSION Stabilizer bar bushing 819 0140 10

Stabilizer bar bushing front L/R (21mm) fits: SUZUKI ALTO IV, ALTO V, IGNIS I, WAGON R+ 1.0-1.3D 09.94-

View part

FAG SUSPENSION Stabilizer bar bushing 819 0141 10

Stabilizer bar bushing rear L/R (25mm) fits: MITSUBISHI PAJERO IV, PAJERO SPORT II 3.0-3.8 10.06-

View part

FAG SUSPENSION Stabilizer bar bushing 819 0142 10

Stabilizer bar bushing front L/R (19,5mm) fits: HYUNDAI I20 I, IX20 1.1D-1.6D 08.08-07.19

View part

FAG SUSPENSION Stabilizer bar bushing 819 0143 10

Stabilizer bar bushing rear L/R (20mm) fits: FORD MONDEO III 1.8-3.0 10.00-03.07

View part

FAG SUSPENSION Stabilizer bar bushing 819 0144 10

Stabilizer bar bushing front L/R (16mm) fits: FORD GALAXY I, GALAXY MK I SEAT ALHAMBRA VW SHARAN, SHARAN FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.8-2.8 03.95-03.10

View part

FAG SUSPENSION Stabilizer bar bushing 819 0145 10

Stabilizer bar bushing front L/R (31mm) fits: JAGUAR S-TYPE II, XJ, XK II 2.5-5.0 01.99-07.14

View part

FAG SUSPENSION Stabilizer bar bushing 819 0146 10

Stabilizer bar bushing front L/R (20mm) fits: FORD TRANSIT 2.0-2.9 01.91-06.00

View part

FAG SUSPENSION Stabilizer bar bushing 819 0147 10

Stabilizer bar bushing front outer L/R (19mm) fits: VW CALIFORNIA T4 CAMPER, TRANSPORTER T4 1.8-2.8 07.90-06.03

View part

FAG SUSPENSION Stabilizer bar bushing 819 0148 10

Stabilizer bar bushing front L/R (25mm) fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, BERLINGO MULTISPACE, C4 II, DS4 PEUGEOT 3008 I, PARTNER 1.2-Electric 04.08-

View part

FAG SUSPENSION Stabilizer bar bushing 819 0149 10

Stabilizer bar bushing front L/R (24,3mm) fits: RENAULT LAGUNA, LAGUNA III 1.5D-3.5 10.07-12.15

View part

FAG SUSPENSION Stabilizer bar bushing 819 0150 10

Stabilizer bar bushing front inner L/R (22mm) fits: RENAULT 11, 9, RAPID FURGON/NADWOZIE WIELKOPRZESTRZENNE, SUPER 5 1.0-Electric 09.81-11.98

View part

FAG SUSPENSION Stabilizer bar bushing 819 0151 10

Stabilizer bar bushing front inner L/R (24mm) fits: DS DS 4 CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, BERLINGO MULTISPACE, C4 II, DS4 PEUGEOT PARTNER 1.2-Electric 04.08-

View part

FAG SUSPENSION Stabilizer bar bushing 819 0152 10

Stabilizer bar bushing front L/R (22,5mm) fits: CITROEN C4, C4 GRAND PICASSO I, C4 I, C4 PICASSO I PEUGEOT 308, 308 I, RCZ 1.4-2.0D 11.04-12.15

View part

FAG SUSPENSION Stabilizer bar bushing 819 0153 10

Stabilizer bar bushing front inner L/R (21mm) fits: PEUGEOT 307, 308, 308 I 1.4-2.0D 08.00-12.14

View part

FAG SUSPENSION Stabilizer bar bushing 819 0154 10

Stabilizer bar bushing front L/R (24,5mm) fits: CITROEN C5 III PEUGEOT 407, 508, 508 I 1.6-3.0D 03.04-

View part

FAG SUSPENSION Stabilizer bar bushing 819 0155 10

Stabilizer bar bushing front inner L/R (24mm) fits: RENAULT 21 1.9D-2.2 03.86-09.95

View part

FAG SUSPENSION Stabilizer bar bushing 819 0156 10

Stabilizer bar bushing front inner L/R (23mm) fits: VW CALIFORNIA T4 CAMPER, TRANSPORTER T4 1.8-2.8 07.90-06.03

View part

FAG SUSPENSION Stabilizer bar bushing 819 0157 10

Stabilizer bar bushing front inner L/R (21mm) fits: CITROEN C4 AIRCROSS, C-CROSSER MITSUBISHI ASX, LANCER VIII, OUTLANDER II, OUTLANDER III PEUGEOT 4007, 4008 1.5-3.0 11.06-

View part

FAG SUSPENSION Stabilizer bar bushing 819 0158 10

Stabilizer bar bushing rear L/R (24mm) fits: MERCEDES SPRINTER 3,5-T (B906), V (638/2), VIANO (W639), VITO / MIXTO (W639), VITO (W638), VITO (W639) 1.8-3.7 02.96-

View part

FAG SUSPENSION Stabilizer bar bushing 819 0159 10

Stabilizer bar bushing front L/R (23mm) fits: DS DS 4 CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, BERLINGO MULTISPACE, C4, C4 GRAND PICASSO I, C4 I, C4 II 1.2-Electric 08.00-

View part

FAG SUSPENSION Stabilizer bar bushing 819 0160 10

Stabilizer bar bushing front L/R (21mm) fits: OPEL ASTRA H, ASTRA H GTC, COMBO TOUR, MERIVA A 1.2-2.0 10.01-12.11

View part

FAG SUSPENSION Stabilizer bar bushing 819 0161 10

Stabilizer bar bushing front outer L/R (23mm) fits: RENAULT 19 I, 19 I CHAMADE, 19 II, 19 II CHAMADE, 21 1.2-2.2 03.86-06.01

View part

FAG SUSPENSION Stabilizer bar bushing 819 0162 10

Stabilizer bar bushing rear L/R (17mm) fits: OPEL SIGNUM, VECTRA C, VECTRA C GTS SAAB 9-3 1.6-3.2 04.02-02.15

View part

FAG SUSPENSION Stabilizer bar bushing 819 0163 10

Stabilizer bar bushing front inner L/R (22mm) fits: RENAULT 25, ESPACE II, ESPACE III 1.9D-3.0 04.84-10.02

View part

FAG SUSPENSION Stabilizer bar bushing 819 0164 10

Stabilizer bar bushing rear inner L/R (27mm) fits: MERCEDES SPRINTER 4-T (B904), SPRINTER 5-T (B906) 1.8-3.5 02.95-12.19

View part

FAG SUSPENSION Stabilizer bar bushing 819 0165 10

Stabilizer bar bushing rear L/R (33mm) fits: MERCEDES SPRINTER 4-T (B904) 2.1D-2.9D 02.95-05.06

View part

FAG SUSPENSION Stabilizer bar bushing 819 0166 10

Stabilizer bar bushing front outer L/R (25mm) fits: RENAULT 21 1.7 03.86-06.94

View part

FAG SUSPENSION Stabilizer bar bushing 819 0167 10

Stabilizer bar bushing front L/R (19,5mm) fits: RENAULT CLIO III, MEGANE II 1.4-2.0D 09.02-

View part

FAG SUSPENSION Stabilizer bar bushing 819 0168 10

Stabilizer bar bushing front L/R (20mm) fits: MERCEDES C (CL203), C T-MODEL (S203), C (W203), CLC (CL203), CLK (C209) 1.6-5.0 05.00-06.11

View part

FAG SUSPENSION Stabilizer bar bushing 819 0169 10

Stabilizer bar bushing front L/R (24mm) fits: BMW 3 (E36), Z3 (E36) 1.7D-2.8 09.90-01.03

View part

FAG SUSPENSION Stabilizer bar bushing 819 0170 10

Stabilizer bar bushing front inner L/R (25,5mm) fits: RENAULT TRAFIC 1.4-2.5D 03.89-03.01

View part

FAG SUSPENSION Stabilizer bar bushing 819 0171 10

Stabilizer bar bushing front L/R (25mm) fits: BMW 3 (E36), Z3 (E36) 1.6-3.0 09.90-01.03

View part

FAG SUSPENSION Stabilizer bar bushing 819 0172 10

Stabilizer bar bushing front L/R (20mm) fits: AUDI A3, TT SKODA OCTAVIA I VW BORA, BORA I, GOLF IV 1.4-3.2 09.96-12.13

View part

FAG SUSPENSION Stabilizer bar bushing 819 0173 10

Stabilizer bar bushing front L/R (22,5mm) fits: BMW 5 (E39) 2.0-3.0D 09.95-05.04

View part

FAG SUSPENSION Stabilizer bar bushing 819 0174 10

Stabilizer bar bushing front L/R (19,5mm) fits: RENAULT LAGUNA II 1.6-3.0 03.01-12.07

View part

Buying with Partios

Buying FAG SUSPENSION parts through Partios

Are these genuine FAG SUSPENSION parts?

Yes. Every FAG SUSPENSION line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FAG SUSPENSION parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FAG SUSPENSION lines that aren't currently available.

Do you supply FAG SUSPENSION parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FAG SUSPENSION parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FAG SUSPENSION order?

It depends on the line. Stocked FAG SUSPENSION items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FAG SUSPENSION parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FAG SUSPENSION lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account