Partios Wholesale catalogue

FAG Suspension Distributor | Suspension & Steering

Wheel suspension track control arm, front (958) · Tie rod end (803) · Stabilizer link (665) · Front track control arm silent block (493) · Tie rod (with no end) (487) · Front ball joint (374) · Macpherson strut mount (315) · Stabilizer bar bushing (275) · 41 further part types (1,123)

5,501 current catalogue lines

About the FAG SUSPENSION range

FAG Suspension is a suspension & steering brand, and the range Partios carries reaches across 49 part types. The largest groups are wheel suspension track control arm, front (958), tie rod end (803), stabilizer link (665), front track control arm silent block (493) and tie rod (with no end) (487). Beyond those, 1,713 lines are spread across 43 further part types. That tail includes macPherson strut mount, stabilizer bar bushing and wheel suspension track control arm, rear. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 5,501 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

FAG SUSPENSION Stabilizer link 818 0724 10

Stabilizer link front L 317mm fits: BMW X3 (G01), X3 (G01, F97, G08), X3 (G45), X4 (G02, F98) 1.6-Electric 08.17-

View part

FAG SUSPENSION Stabilizer link 818 0726 10

Stabilizer link rear L/R 133mm fits: BMW X3 (G01), X3 (G01, F97, G08), X4 (G02, F98) 1.6-Electric 08.17-

View part

FAG SUSPENSION Stabilizer link 818 0730 10

Stabilizer link rear L/R 174mm fits: AUDI A7, A8 D5, E-TRON, Q7, Q8, Q8 E-TRON BENTLEY BENTAYGA LAMBORGHINI URUS PORSCHE CAYENNE VW TOUAREG 2.0-Electric 01.15-

View part

FAG SUSPENSION Stabilizer link 818 0731 10

Stabilizer link front L 256mm fits: MERCEDES S (A217), S (C217), S (W222, V222, X222) 2.2DH-6.0 05.13-07.20

View part

FAG SUSPENSION Stabilizer link 818 0732 10

Stabilizer link front R 256mm fits: MERCEDES S (A217), S (C217), S (W222, V222, X222) 2.2DH-6.0 05.13-07.20

View part

FAG SUSPENSION Stabilizer link 818 0735 10

Stabilizer link front L/R 295mm fits: HYUNDAI ELANTRA VI, I30, IONIQ, KONA KIA CEED, CERATO IV, NIRO, NIRO I, PROCEED, SOUL III, SOUL III CARGO, XCEED 1.0-Electric 10.15-

View part

FAG SUSPENSION Stabilizer link 818 0736 10

Stabilizer link rear L/R 72mm fits: HYUNDAI ELANTRA VI, I30, IONIQ, KONA KIA CEED, CERATO IV, NIRO, NIRO I, PROCEED, SOUL III, SOUL III CARGO, XCEED 1.0-Electric 10.15-

View part

FAG SUSPENSION Stabilizer link 818 0737 10

Stabilizer link front L 295mm fits: MERCEDES GLE (C167), GLE (V167), GLS (X167) 2.0D-4.0H 10.18-

View part

FAG SUSPENSION Stabilizer link 818 0738 10

Stabilizer link front R 295mm fits: MERCEDES GLE (C167), GLE (V167), GLS (X167) 2.0D-4.0H 10.18-

View part

FAG SUSPENSION Stabilizer link 818 0739 10

Stabilizer link rear L/R 170mm fits: DS DS 7 PEUGEOT 508 II 1.2-2.0D 09.17-

View part

FAG SUSPENSION Stabilizer link 818 0818 10

Stabilizer link front L 347mm fits: MERCEDES MARCO POLO CAMPER (W447), V (W447), VITO MIXTO (DOUBLE CABIN), VITO TOURER (W447), VITO (W447) 2.0D/2.2D 12.14-

View part

FAG SUSPENSION Stabilizer link 818 0819 10

Stabilizer link front R 347mm fits: MERCEDES MARCO POLO CAMPER (W447), V (W447), VITO MIXTO (DOUBLE CABIN), VITO TOURER (W447), VITO (W447) 2.0D/2.2D 12.14-

View part

FAG SUSPENSION Stabilizer link 818 0820 10

Stabilizer link front L/R 316mm fits: MERCEDES EQV (W447), MARCO POLO CAMPER (W447), VITO MIXTO (DOUBLE CABIN), VITO TOURER (W447), VITO (W447) 1.6D/1.7D/Electric 10.14-

View part

FAG SUSPENSION Stabilizer link 818 0822 10

Stabilizer link front L fits: HYUNDAI H350 2.5D 04.15-

View part

FAG SUSPENSION Stabilizer link 818 0823 10

Stabilizer link front R 168mm fits: HYUNDAI H350 2.5D 04.15-

View part

FAG SUSPENSION Stabilizer link 818 0824 10

Stabilizer link rear L/R fits: HYUNDAI H350 2.5D 04.15-

View part

FAG SUSPENSION Stabilizer link 818 0825 10

Stabilizer link rear L/R 111mm fits: HYUNDAI NEXO, TUCSON KIA SPORTAGE IV 1.6-Electric 06.15-

View part

FAG SUSPENSION Stabilizer link 818 0826 10

Stabilizer link front L/R 287mm fits: ABARTH 500 / 595 / 695, 500C / 595C / 695C, 500E FIAT 500, 500 C, 500E, BRAVO, BRAVO II, PANDA, STILO LANCIA DELTA III, YPSILON 0.9-Electric 10.01-

View part

FAG SUSPENSION Stabilizer link 818072510

Stabilizer link front L 317mm fits: BMW X3 (G01), X3 (G01, F97, G08), X3 (G45), X4 (G02, F98) 1.6-Electric 08.17-

View part

FAG SUSPENSION Stabilizer bar bushing 819 0001 10

Stabilizer bar bushing front L/R (18,5mm) fits: BMW 3 (E30) 1.6-2.7 09.82-06.94

View part

FAG SUSPENSION Stabilizer bar bushing 819 0002 10

Stabilizer bar bushing front L/R (23mm) fits: BMW 3 (E36), 5 (E34) 1.8-4.0 06.87-01.98

View part

FAG SUSPENSION Stabilizer bar bushing 819 0003 10

Stabilizer bar bushing front inner L/R (24mm) fits: MERCEDES 124 (C124), 124 T-MODEL (S124), 124 (W124), 190 (W201), E (C124), E T-MODEL (S124), E (W124) 2.0-2.6 12.84-06.97

View part

FAG SUSPENSION Stabilizer bar bushing 819 0004 10

Stabilizer bar bushing front L/R (21mm) fits: MERCEDES 123 (C123), 123 (W123) 2.0-3.0D 01.76-12.85

View part

FAG SUSPENSION Stabilizer bar bushing 819 0005 10

Stabilizer bar bushing front outer L/R (23mm) fits: MERCEDES 124 (C124), 124 T-MODEL (S124), 124 (W124), 190 (W201), E (C124), E T-MODEL (S124), E (W124) 1.8-2.5D 10.82-06.97

View part

FAG SUSPENSION Stabilizer bar bushing 819 0006 10

Stabilizer bar bushing front inner L/R (26,5mm) fits: MERCEDES 124 (A124), 124 (C124), 124 T-MODEL (S124), 124 (W124), E (A124), E (C124), E T-MODEL (S124), E (W124) 2.0-6.0 12.84-03.98

View part

FAG SUSPENSION Stabilizer bar bushing 819 0007 10

Stabilizer bar bushing front L/R (26,5mm) fits: MERCEDES E T-MODEL (S210), E (W210) 2.0-5.4 06.95-03.03

View part

FAG SUSPENSION Stabilizer bar bushing 819 0008 10

Stabilizer bar bushing rear inner L/R (22mm) fits: MERCEDES SPRINTER 2-T (B901, B902), SPRINTER 3-T (B903), SPRINTER 4-T (B904) VW LT 28-35 II, LT 28-46 II 2.1D-Electric 01.95-07.06

View part

FAG SUSPENSION Stabilizer bar bushing 819 0009 10

Stabilizer bar bushing front/rear outer L/R (12mm) fits: MERCEDES SPRINTER 2-T (B901, B902), SPRINTER 3,5-T (B906), SPRINTER 3-T (B903), SPRINTER 3-T (B906), SPRINTER 4 1.8-Electric 04.77-12.19

View part

FAG SUSPENSION Stabilizer silent block 819 0010 10

Stabilizer silentblock front L/R (26mm, 16mm) fits: MERCEDES T1 (601), T1 (601, 611), T1 (602), T1 (B601), T1 (B602), T1/TN 2.3-3.0D 04.77-02.96

View part

FAG SUSPENSION Stabilizer bar bushing 819 0011 10

Stabilizer bar bushing front inner L/R (16mm) fits: FORD ESCORT CLASSIC, ESCORT V, ESCORT V EXPRESS, ESCORT VI, FIESTA, FIESTA FURGON/NADWOZIE WIELKOPRZESTRZENNE, FIESTA III 1.0-2.0 01.89-08.03

View part

FAG SUSPENSION Stabilizer bar bushing 819 0012 10

Stabilizer bar bushing front inner L/R (13mm) fits: FORD KA 1.3/1.6 09.96-11.08

View part

FAG SUSPENSION Stabilizer bar bushing 819 0013 10

Stabilizer bar bushing front inner L/R (15mm) fits: FORD FIESTA FURGON/NADWOZIE WIELKOPRZESTRZENNE, FIESTA IV, KA 1.0-1.8D 08.95-11.08

View part

FAG SUSPENSION Stabilizer bar bushing 819 0014 10

Stabilizer bar bushing front inner L/R (18mm) fits: FORD FOCUS I 1.4-2.0 08.98-03.05

View part

FAG SUSPENSION Stabilizer bar bushing 819 0015 10

Stabilizer bar bushing front L/R (23mm) fits: FORD TRANSIT 2.0D/2.3/2.4D 01.00-05.06

View part

FAG SUSPENSION Stabilizer bar bushing 819 0016 10

Stabilizer bar bushing front L/R (22mm) fits: OPEL OMEGA A, SENATOR B 1.8-3.6 09.86-04.94

View part

FAG SUSPENSION Stabilizer bar bushing 819 0017 10

Stabilizer bar bushing front L/R (18mm) fits: OPEL ASTRA F, CALIBRA A, VECTRA A 1.4-2.5 04.88-03.01

View part

FAG SUSPENSION Stabilizer bar bushing 819 0018 10

Stabilizer bar bushing front L/R (17,5mm) fits: OPEL CORSA A, CORSA A TR, CORSA B, TIGRA 1.0-1.7D 09.82-12.02

View part

FAG SUSPENSION Stabilizer bar bushing 819 0019 10

Stabilizer bar bushing rear inner L/R (14mm) fits: OPEL CALIBRA A, OMEGA A, OMEGA B, SENATOR B, VECTRA A, VECTRA B 1.4-3.6 09.86-07.03

View part

FAG SUSPENSION Stabilizer bar sleeve 819 0020 10

Rubber ring for stabilizing bar front L/R (8,5/30mm) fits: OPEL ASCONA B, ASCONA C, ASTRA F, ASTRA F CLASSIC, CALIBRA A, COMMODORE C, KADETT C, KADETT C CITY, KADETT D, KADETT E 1.0-3.0 08.73-01.05

View part

FAG SUSPENSION Stabilizer bar bushing 819 0021 10

Stabilizer bar bushing front L/R (21mm) fits: CHEVROLET TIGRA OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, CORSA B, TIGRA 1.0-1.7D 03.93-08.02

View part

FAG SUSPENSION Stabilizer bar bushing 819 0022 10

Stabilizer bar bushing rear inner L/R (16mm) fits: OPEL SIGNUM, VECTRA B, VECTRA C 1.6-2.6 09.95-01.09

View part

FAG SUSPENSION Stabilizer bar bushing 819 0023 10

Stabilizer bar bushing front L/R (23mm) fits: OPEL OMEGA A, OMEGA B, SENATOR B 1.8-3.6 09.86-07.03

View part

FAG SUSPENSION Stabilizer bar bushing 819 0024 10

Stabilizer bar bushing front inner L/R (16mm) fits: CHEVROLET CHEVY OPEL ASTRA G, ASTRA G CLASSIC, COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, COMBO TOUR, CORSA C, CORSA UTILITY C, TIGRA 1.0-2.6 09.95-

View part

FAG SUSPENSION Stabilizer bar bushing 819 0025 10

Stabilizer bar bushing rear L/R (13mm) fits: OPEL ASTRA F, CALIBRA A, OMEGA A, OMEGA B, SENATOR B, VECTRA A 1.4-3.6 09.86-07.03

View part

FAG SUSPENSION Stabilizer bar bushing 819 0026 10

Stabilizer bar bushing front inner L/R (18mm) fits: CHEVROLET CHEVY OPEL ASTRA G, ASTRA G CLASSIC, TIGRA, ZAFIRA A 1.2-2.2D 02.98-12.10

View part

FAG SUSPENSION Stabilizer bar bushing 819 0027 10

Stabilizer bar bushing front L/R (16mm) fits: OPEL ASTRA F, VECTRA A 1.4-2.5 09.91-03.01

View part

FAG SUSPENSION Stabilizer bar bushing 819 0028 10

Stabilizer bar bushing front L/R (22mm) fits: OPEL VECTRA A 1.4-2.5 04.88-11.95

View part

FAG SUSPENSION Stabilizer bar bushing 819 0029 10

Stabilizer bar bushing front outer L/R (12,5mm) fits: AUDI 80 B1, 80 B2, 80 B3, COUPE B2 VW PASSAT B2, SANTANA 1.3-2.3 05.72-10.91

View part

Buying with Partios

Buying FAG SUSPENSION parts through Partios

Are these genuine FAG SUSPENSION parts?

Yes. Every FAG SUSPENSION line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FAG SUSPENSION parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FAG SUSPENSION lines that aren't currently available.

Do you supply FAG SUSPENSION parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FAG SUSPENSION parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FAG SUSPENSION order?

It depends on the line. Stocked FAG SUSPENSION items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FAG SUSPENSION parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FAG SUSPENSION lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account