Partios Wholesale catalogue

Engitech Distributor | Parts

CR injector elements (1,112) · Cylinder head gasket (724) · Fuel pump (478) · Valve cover gasket (343) · Fuel tank (298) · Piston (276) · Ignition leads set (243) · Complete engine gasket set (upper) (239) · 199 further part types (5,180)

9,085 current catalogue lines

About the ENGITECH range

Engitech spans several vehicle systems in the Partios catalogue: 9,085 lines across 207 part types, with no single area dominating. The largest groups are CR injector elements (1,112), cylinder head gasket (724), fuel pump (478), valve cover gasket (343) and fuel tank (298). They account for only 36% of the range, though. The other 5,662 lines sit across 201 further part types, which is what makes this a range to search rather than browse. That tail includes ignition leads set, complete engine gasket set (upper) and complete engine gasket set (full). Buyers are typically workshops, motor factors and exporters; a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. With 9,085 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

ENGITECH Engine block gasket ENT020172

Engine block gasket BF4M1012 BF6M1012 fits: FENDT 307 C FARMER, 308 FARMER DEUTZ FAHR 100, 75 A, 105, 105 MK3, 106 MK2, 106 MK3, 110 MK2, 110 MK3, 115 MK2, 115 MK3, 4.70 MK1, 4.80 MK1

View part

ENGITECH Water pump gasket ENT020173

Water pump gasket fits: BOBCAT 975 CLAAS 546, 556, 566, 456 RA, 456 RC, 456 RX DITCH WITCH 100 JOHN DEERE 110, 115, 1570, 200, 200 C LC, 200 LC, 210, 230 C LC, 230 LC, 270 C LC, 300, 310

View part

ENGITECH Engine block gasket ENT020174

Engine block gasket fits: URSUS 2812, 3512, 3514 MASSEY FERGUSON 235, 255

View part

ENGITECH Engine block gasket ENT020175

Engine block gasket fits: FENDT 600 LS FAVORIT, 600 LSA FAVORIT, 610 LS FAVORIT, 610 LSA FAVORIT, 610 S FAVORIT, 610 SA FAVORIT, 610 SL FAVORIT, 611 FAVORIT, 611 LS FAVORIT, 611 LSA FAVORIT

View part

ENGITECH Engine block gasket ENT020176

Engine block gasket fits: JOHN DEERE 2350 4WD, 2550 4WD, 3200 A, 3300 A, 3310 A, 3400 A, 5410, 5420, 5500, 6010, 6010 SE, 6100, 6100 SE

View part

ENGITECH Engine block gasket ENT020177

Engine block gasket fits: JOHN DEERE 100, 110, 200, 210, 300, 310, 400, 600, 6010, 6100, 6110, 6110 E, 6110 L, 6200, 6200 L, 6210, 6210 L, 6210 SE, 6300, 6300 L, 6310, 6310 L, 6310 SE, 6400

View part

ENGITECH Engine block gasket ENT020182

Engine block gasket fits: KUBOTA B 7400, B 7400 HSD, K 008, KGP 008, KHP 008

View part

ENGITECH Engine block gasket ENT020183

Engine block gasket fits: KUBOTA B 7400, B 7400 HSD, K 008, KGP 008, KHP 008

View part

ENGITECH Engine block gasket ENT020184

Engine block gasket fits: KUBOTA B 7400, B 7400 HSD, K 008, KGP 008, KHP 008

View part

ENGITECH Engine block gasket ENT020185

Engine block gasket fits: KUBOTA B 7400, B 7400 HSD, K 008, KGP 008, KHP 008

View part

ENGITECH Engine block gasket ENT020186

Engine block gasket fits: KUBOTA B 7400, B 7400 HSD, K 008, KGP 008, KHP 008

View part

ENGITECH Engine block gasket ENT020187

Engine block gasket fits: KUBOTA B 7400, B 7400 HSD, K 008, KGP 008, KHP 008

View part

ENGITECH Engine block gasket ENT020188

Engine block gasket fits: KUBOTA KH 021, KH 024, KH 041, KH 050, KH 051, KH 61

View part

ENGITECH Engine block gasket ENT020191

Engine block gasket D0826, FENDT 816 FAVORIT, 816 TURBO FAVORIT, 818 FAVORIT, 818 TURBO FAVORIT, 818 VARIO FAVORIT, 818 VARIO TMS, 822 FAVORIT, 822 TURBO FAVORIT, 824 FAVORIT, 824 TURBO FAVORIT

View part

ENGITECH Turbocharger gasket ENT020192

Turbocharger gasket fits: URSUS 5322, 5324 CASE IH 11, 80 C CLAAS 925 PLUS, 964 PLUS, 965 PLUS, 974 PLUS, 975 PLUS JCB 520 LE, 520 SLE, 520-50 LE, 525-50 S LANDINI 8210, 8220, 100, 70

View part

ENGITECH Engine block gasket ENT020193

Engine block gasket fits: MASSEY FERGUSON 1004, 1004 T, 1007, 1010, 1014, 1020, 1024, 1030, 1030 L, 1035

View part

ENGITECH Engine block gasket ENT020194

Engine block gasket fits: URSUS 1004, 5322, 5324 MASSEY FERGUSON 281, 2225, 2235, 3075, 3340, 4335, 6130, 6140, 6150

View part

ENGITECH Injector seal ENT020196

Injector seal fits: MASSEY FERGUSON 158, 265, 265 S, 275, 283, 285, 285 S, 290, 362, 362 N, 365, 372 N, 375, 382 N, 383, 390, 390 T, 393, 396, 398, 399, 3050, 3060, 3060E, 3065, 3070

View part

ENGITECH Fuel hose repair elements ENT020197

Engine block gasket fits: URSUS 2812, 3512, 3514, 4512, 4514, 5314, 5714, 360, 360 3P LANDINI 16000, 16500, 16550, 4500, 4530, 4530 V, 4560 V, 4830, 55 GT, 560 F, 560 L, 560 V, 5560 F, 5560 L

View part

ENGITECH Thermostat gasket ENT020203

Thermostat housing seal/gasket 403C-15 404C-22 404C-22T fits: ANTONIO CARRARO 3000 ATLAS AR 30, AR 35, AR 35 SUPER, AR 40 CASE IH 28, 31, 35 GEHL 245 JCB 208S, 8025, 8025 CTS, 8025 ZTS

View part

ENGITECH Crankshaft oil seal ENT020204

Crankshaft oil seal length: 12cm O-ring rope fits: AEBI TP 47 BOBCAT 825 CASE IH 1194, 1294, 1394, 1494 DAVID BROWN 1190, 1200, 1210, 1212, 1290, 1390, 780, 885, 900, 995, 996

View part

ENGITECH Crankcase ventilation gasket ENT020205

Crankcase ventilation gasket fits: CASE IH 1055 XL, 1056, 1056 XL, 1255, 1255 XL, 1455 XL, 353, 383, 423 E, 423 V, 433, 433 E, 433 SA, 433 V, 453, 453 E, 453 V, 523, 523 A, 533 A, 533 E, 533 V

View part

ENGITECH Valve stem gasket/seal set ENT020206

Valve stem gasket/seal set fits: JCB 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC, TM 310

View part

ENGITECH Engine block gasket ENT020212

Engine block gasket fits: URSUS 325

View part

ENGITECH Engine block gasket ENT020214

Engine block gasket (digger-loader) fits: JCB 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC

View part

ENGITECH Oil sump gasket ENT020216

Oil sump gasket fits: JOHN DEERE 105, 115, 1068, 1068H, 1072, 1075 H, 1166, 1166H, 1169, 1169H, 1174, 1174H, 1177, 1177H, 200, 240, 250, 2054, 2254, 2940, 2950, 300, 310, 330, 350, 3010

View part

ENGITECH Steering gear seal ENT020220

Steering gear seal (30x50x15) fits: URSUS 2812, 3512, 3514, 235, 255 MASSEY FERGUSON 235, 235 FR, 235 S, 255, 255 T

View part

ENGITECH Oil sump gasket ENT020222

Oil sump gasket OM457LA, CLAAS 870

View part

ENGITECH Oil sump gasket ENT020224

Oil sump gasket fits: GUELDNER G30, G35, G40

View part

ENGITECH Oil sump gasket ENT020225

Oil sump gasket fits: DAVID BROWN 1200, 1210, 1212, 1290, 1294, 1390, 1394, 1410, 1412, 1490, 1494, 1690, 990, 995, 996

View part

ENGITECH Oil sump gasket ENT020226

Oil sump gasket , DEUTZ FAHR 25, 25 A, 25 HST LAMBORGHINI 250 DTA MASSEY FERGUSON 142 S (3 CYL), 1325 SAME 25

View part

ENGITECH Oil sump gasket ENT020229

Oil sump gasket fits: LAMBORGHINI R 955 DT

View part

ENGITECH Oil sump gasket ENT020230

Oil sump gasket fits: ZETOR 11741 LAMBORGHINI 120, 150, 160, 180, 200, 115, 135, 1060, 1100, 1300, 165, 190, 195 MASSEY FERGUSON 401, 465 SAME 110, 130 T, 120, 135, 150, 160, 180, 200

View part

ENGITECH Oil sump gasket ENT020231

Oil sump gasket D650 D722 fits: BOBCAT E08, E10, E14, E16, 320, 322 BOMAG BW80AD-2, BW80ADH-2 KUBOTA B 7400, B 7400 HSD, B 1800 D, B 1800 E, K 008, K 008-3, KGP 008, KGP 008-3, KHP 008

View part

ENGITECH Oil sump gasket ENT020232

Oil sump gasket fits: PERKINS WEIDEMANN 404C.22T 104.19

View part

ENGITECH Oil sump gasket ENT020233

Oil sump gasket 403C-15 403D-15 403D-17 fits: ATLAS AR 30, AR 35, AR 35 SUPER, AR 40 JCB 8025, 8025 CTS, 8025 ZTS, 8026 CTS, 8030 ZTS, 8032 ZTS, 8035 ZTS YAGMUR 350 4WD

View part

ENGITECH Thermostat housing seal/gasket ENT020236

Thermostat housing seal/gasket fits: MASSEY FERGUSON 168, 175, 175 S, 185, 188, 261, 265, 265 S, 275, 283, 285, 290, 2035 HT, 2045 HT, 362, 362 N, 365, 372 N, 375, 382 N, 383, 390, 390 T, 393

View part

ENGITECH Timing gear cover gasket ENT020237

Timing gear cover gasket fits: FENDT 200 K FARMER, 200 S FARMER, 200 SA FARMER, 200 V FARMER, 201 S FARMER, 201 SA FARMER, 203 K FARMER, 203 P FARMER, 203 PA FARMER, 203 PB FARMER, 203 PE FARMER

View part

ENGITECH Timing gear cover gasket ENT020238

Timing gear cover gasket BF6M1012 fits: DEUTZ FAHR 100, 105, 105 MK3, 106 MK2, 106 MK3, 110 MK2, 110 MK3, 115 MK2, 115 MK3, 6.00 MK1, 6.01, 6.05 MK1, 6.105, 6.110, 6.15 MK1

View part

ENGITECH Oil pump gasket ENT020239

Oil pump seal BF4M1013 fits: DEUTZ FAHR 100, 105, 105 MK3, 106 MK2, 106 MK3, 110 MK2, 110 MK3, 115 MK2, 115 MK3, 6.00 MK1, 6.01, 6.05 MK1, 6.105, 6.110, 6.15 MK1

View part

ENGITECH Timing gear cover gasket ENT020240

Timing gear cover gasket 984P fits: SAME 70

View part

ENGITECH Timing gear cover gasket ENT020246

Timing gear cover gasket AD4.203 fits: MASSEY FERGUSON 155, 158, 158 MK III, 158 F, 158 S, 158 V, 165, 165 FR, 165 MK III, 165 MK III FR, 165 S, 165 UK, 260, 560, MF 65, MF 65 MARK II, MF 65 S

View part

ENGITECH Timing gear cover gasket ENT020247

Timing gear cover gasket fits: URSUS 1002, 1004, 1012, 1014, 1032, 1034, 1132, 1134, 1201, 1201 TURBO, 1204, 1204 TURBO, 1212, 1214, 1222, 1224, 1232, 1234, 1434, 1604, 1614, 1624, 1634, 1654

View part

ENGITECH Cylinder liner o-ring set ENT020248

Cylinder liner o-ring set fits: FENDT 14 S FARMER, 102 FARMER, 102 LS FARMER, 102 LSA FARMER, 102 S FARMER, 102 SA FARMER, 103 FARMER, 103 LS FARMER, 103 LSA FARMER, 103 S FARMER, 103 SA FARMER

View part

ENGITECH Cylinder liner o-ring set ENT020249

Cylinder liner o-ring set fits: LIEBHERR A912, A922 HDS, L511, L521, L531, L541, R922 HDS, R942, R942HD

View part

ENGITECH Cylinder liner o-ring set ENT020249/6

Cylinder liner o-ring set (quantity per packaging: 6pcs, price per: 6pcs,) fits: LIEBHERR A912, A922 HDS, L511, L521, L531, L541, R922 HDS, R942, R942HD

View part

ENGITECH Thermostat housing seal/gasket ENT020252

Thermostat housing seal/gasket fits: JOHN DEERE 1032, 1040, 1040F, 1040V, 1042, 1052, 1133, 1140, 1140A, 1140E, 1140F, 1140V, 1144, 1155, 1157, 1158, 1350, 1550, 1640, 1640F, 1750, 1750V, 1850

View part

ENGITECH Thermostat housing seal/gasket ENT020253

Thermostat housing seal/gasket fits: ATLAS XAS 90 BOBCAT 975 JOHN DEERE 100, 105, 110, 115, 135, 1020, 1030, 1030 OU, 1030CU, 1030VU, 1040, 1040V, 1055, 1065, 1068H, 1072, 1085, 1085 HYDRO

View part

Buying with Partios

Buying ENGITECH parts through Partios

Are these genuine ENGITECH parts?

Yes. Every ENGITECH line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source ENGITECH parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for ENGITECH lines that aren't currently available.

Do you supply ENGITECH parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on ENGITECH parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a ENGITECH order?

It depends on the line. Stocked ENGITECH items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for ENGITECH parts?

No. There's no minimum order value or quantity on a Partios trade account. Some ENGITECH lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account