Partios Wholesale catalogue

Engitech Distributor | Parts

CR injector elements (1,112) · Cylinder head gasket (724) · Fuel pump (478) · Valve cover gasket (343) · Fuel tank (298) · Piston (276) · Ignition leads set (243) · Complete engine gasket set (upper) (239) · 199 further part types (5,180)

9,085 current catalogue lines

About the ENGITECH range

Engitech spans several vehicle systems in the Partios catalogue: 9,085 lines across 207 part types, with no single area dominating. The largest groups are CR injector elements (1,112), cylinder head gasket (724), fuel pump (478), valve cover gasket (343) and fuel tank (298). They account for only 36% of the range, though. The other 5,662 lines sit across 201 further part types, which is what makes this a range to search rather than browse. That tail includes ignition leads set, complete engine gasket set (upper) and complete engine gasket set (full). Buyers are typically workshops, motor factors and exporters; a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. With 9,085 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

ENGITECH Cylinder head gasket ENT014177

Cylinder head gasket (thickness: 0,62mm) fits: AUDI A1, A3 SEAT ALTEA, ALTEA XL, IBIZA IV, IBIZA IV SC, IBIZA IV ST, LEON, TOLEDO IV SKODA FABIA II, OCTAVIA II, RAPID 1.2/1.2LPG 11.08-05.22

View part

ENGITECH Cylinder head gasket ENT014178

Cylinder head gasket (thickness: 0,7mm) fits: RVI MASCOTT NISSAN INTERSTAR, PATROL GR V, TERRANO II OPEL MOVANO A RENAULT MASTER II, MASTER PRO 3.0D 10.97-

View part

ENGITECH Cylinder head gasket ENT014180

Cylinder head gasket (thickness: 1,71mm) fits: AUDI A1, A3 SEAT ALTEA, ALTEA XL, IBIZA IV, IBIZA IV SC, IBIZA IV ST, LEON, TOLEDO IV SKODA FABIA II, FABIA II PRAKTIK, OCTAVIA II 1.6D 02.09-09.20

View part

ENGITECH Cylinder head gasket ENT014181

Cylinder head gasket (thickness: 0,8mm) fits: SUBARU FORESTER, IMPREZA, LEGACY III, LEGACY IV, OUTBACK 2.5/2.5LPG 10.98-

View part

ENGITECH Cylinder head gasket ENT014182

Cylinder head gasket (thickness: 1,27mm) fits: VW CALIFORNIA T5 CAMPER, MULTIVAN T5, TOUAREG, TRANSPORTER T5 2.5D 01.03-05.10

View part

ENGITECH Cylinder head gasket ENT014183

Cylinder head gasket (thickness: 0,4mm) fits: FORD GALAXY II, MONDEO IV, S-MAX, TRANSIT FORD USA FUSION MAZDA 3, 5, 6, MX-5 III 2.0-2.3LPG 01.02-06.15

View part

ENGITECH Cylinder head gasket ENT014184

Cylinder head gasket (thickness: 0,55mm) fits: NISSAN ALTIMA, AVENIR, PRIMERA, SENTRA V, TEANA I, X-TRAIL I 2.0/2.5 07.01-

View part

ENGITECH Cylinder head gasket ENT014185

Cylinder head gasket (thickness: 1,2mm) fits: FSO POLONEZ III LAND ROVER FREELANDER I LOTUS ELISE MG MGF, TF, ZR, ZS, ZT, ZT- T ROVER 100, 100 / METRO, 200, 200 II, 25 I, 400 1.1-1.8 10.89-12.09

View part

ENGITECH Cylinder head gasket ENT014186

Cylinder head gasket (thickness: 1,25mm) fits: DS DS 3, DS 4, DS 5 VOLVO C30, S40 II, S60 II, S80 II, V40, V50, V60 I, V70 III CITROEN BERLINGO 1.6D 08.05-

View part

ENGITECH Cylinder head gasket ENT014187

Cylinder head gasket (thickness: 0,55mm) fits: OPEL AGILA A, CORSA B, CORSA C 1.0 11.96-12.07

View part

ENGITECH Cylinder head gasket ENT014188

Cylinder head gasket (thickness: 0,7mm) fits: HONDA ACCORD VI, CITY, CIVIC V, CIVIC VI, CRX III, HR-V ROVER 400 II 1.4-1.6 03.92-09.05

View part

ENGITECH Cylinder head gasket ENT014189

Cylinder head gasket (thickness: 1,3mm) fits: HYUNDAI ELANTRA III, I30, SANTA FÉ I, SONATA V, TRAJET, TUCSON KIA CARENS I, CARENS III, CEE'D, CERATO I, MAGENTIS II, PRO CEE'D 2.0D 04.01-03.13

View part

ENGITECH Cylinder head gasket ENT014190

Cylinder head gasket (thickness: 1,2mm) fits: CADILLAC BLS LOTUS EUROPA S OPEL ASTRA G, ASTRA H, ASTRA H GTC, SPEEDSTER, ZAFIRA A, ZAFIRA B 2.0/2.0ALK 09.00-

View part

ENGITECH Cylinder head gasket ENT014191

Cylinder head gasket (thickness: 0,5mm) fits: VOLVO S60 II, S80 II, V40, V60 I, V70 III FORD C-MAX II, FIESTA VI, FOCUS III, GALAXY II, GALAXY MK II, GRAND C-MAX, KUGA II 1.6/1.6ALK 04.10-

View part

ENGITECH Cylinder head gasket ENT014192

Cylinder head gasket (thickness: 1,24mm) fits: NISSAN INTERSTAR OPEL MOVANO A RENAULT AVANTIME, ESPACE III, ESPACE IV, LAGUNA II, MASTER II, VEL SATIS 2.2D 12.97-

View part

ENGITECH Cylinder head gasket ENT014195

Cylinder head gasket (thickness: 1,2mm) fits: FIAT CINQUECENTO, PANDA, SEICENTO / 600 0.9 07.91-01.10

View part

ENGITECH Cylinder head gasket ENT014196

Cylinder head gasket (thickness: 1mm) fits: LEXUS IS II TOYOTA AURIS, AVENSIS, COROLLA, COROLLA VERSO, RAV 4 III, RAV 4 IV, VERSO 1.4D/2.0D/2.2D 07.04-09.19

View part

ENGITECH Cylinder head gasket ENT014198

Cylinder head gasket (thickness: 1,42mm) fits: VOLVO C30, C70 II, S40 II, S60 II, S80 II, V40, V50, V60 I, V70 III, XC60 I, XC70 II FORD FOCUS II, KUGA I, MONDEO IV, S-MAX 2.5/2.5ALK 01.04-12.18

View part

ENGITECH Cylinder head gasket ENT014199

Cylinder head gasket (thickness: 0,5mm) fits: SEAT AROSA, CORDOBA, IBIZA II VW LUPO I, POLO 1.0 09.96-07.05

View part

ENGITECH Cylinder head gasket ENT014200

Cylinder head gasket fits: AUDI A4 B5, A4 B6, A4 B7, A6 C5, A8 D2, ALLROAD C5 SKODA SUPERB I VW PASSAT B5, PASSAT B5.5 2.5D 01.97-03.08

View part

ENGITECH Cylinder sleeve o-ring ENT020001

Cylinder liner o-ring (88x2mm) fits: DEUTZ FAHR 10006, 12006, 13006, 120 H, 2505, 2506, 2807, 3005, 3006, 3607, 4005, 4006, 4007, 4505, 4506, 4507, 4807, 5005, 5006, 5206, 5207, 5505, 5506, 6005

View part

ENGITECH Cylinder sleeve spacer ENT020002

Lower supporting flange seal/spacer 110,1x117,6x0,2mm fits: DEUTZ FAHR 10006, 12006, 13006, 2506, 2807, 3006, 3607, 4006, 4007, 4506, 4507, 4807, 5006, 5206, 5207, 5506, 6006, 6206, 6207, 6507

View part

ENGITECH Cylinder sleeve spacer ENT020003

Lower supporting flange seal/spacer 100x117,6x0,5mm fits: DEUTZ FAHR 10006, 11400 TTV, 12006, 13006, 120 H, 2506, 2807, 3006, 3607, 3607F, 4006, 4007, 4007F, 4007U, 4506, 4507, 4507A, 4507C

View part

ENGITECH Cylinder sleeve spacer ENT020004

Lower supporting flange seal/spacer 100x102x0,8mm fits: DEUTZ FAHR 4.68, 4.78, 4.10, 6.10, M 1000, M 1002, M 1080, M 1102, M 1200, M 1250, M 1300, M 1300 HYDROMAT, M 1302, M 1302 HA, M 1320

View part

ENGITECH Cylinder sleeve spacer ENT020004/4

Lower supporting flange seal/spacer 100x102x0,8mm (quantity per packaging: 4pcs, price per: 4pcs,) fits: DEUTZ FAHR 4.68, 4.78, 4.10, 6.10, M 1000, M 1002, M 1080, M 1102, M 1200, M 1250, M 1300

View part

ENGITECH Cylinder sleeve spacer ENT020006

Lower supporting flange seal/spacer 117x127x0,25mm fits: SAME 100 2WD, 100 4WD

View part

ENGITECH Cylinder sleeve spacer ENT020007

Lower supporting flange seal/spacer 117x127x0,5mm fits: SAME 100 2WD, 100 4WD

View part

ENGITECH Cylinder sleeve spacer ENT020009

Lower supporting flange seal/spacer x1,5mm (acid-proof non-magnetic) fits: DEUTZ FAHR 10006, 11400 TTV, 12006, 13006, 120 H, 2506, 2807, 3006, 3607, 4006, 4007, 4506, 4507, 4807, 5006, 5206

View part

ENGITECH Cylinder sleeve spacer ENT020009/4

Lower supporting flange seal/spacer x1,5mm (quantity per packaging: 4pcs, price per: 4pcs, acid-proof non-magnetic) fits: DEUTZ FAHR 10006, 11400 TTV, 12006, 13006, 120 H, 2506, 2807, 3006, 3607

View part

ENGITECH Cylinder sleeve spacer ENT020010/4

Lower supporting flange seal/spacer x2mm (quantity per packaging: 4pcs, price per: 4pcs,) fits: FENDT 2 D FARMER, 200 K FARMER, 200 S FARMER, 200 SA FARMER, 200 V FARMER, 200 VA FARMER

View part

ENGITECH Cylinder sleeve spacer ENT020011

Lower supporting flange seal/spacer x3mm fits: DEUTZ FAHR 10006, 12006, 13006, 2506, 2807, 3006, 3607, 4006, 4007, 4506, 4507, 4807, 5006, 5206, 5207, 5506, 6006, 6206, 6207, 6507, 6806, 6807

View part

ENGITECH Cylinder sleeve spacer ENT020011/4

Lower supporting flange seal/spacer x3mm (quantity per packaging: 4pcs, price per: 4pcs,) fits: DEUTZ FAHR 10006, 11400 TTV, 12006, 13006, 120 H, 2506, 2807, 3006, 3607, 4006, 4007, 4506, 4507

View part

ENGITECH Cylinder sleeve spacer ENT020012

Lower supporting flange seal/spacer x1,5mm fits: FENDT 380 GTA DEUTZ FAHR 4.71, DX 6.31, DX 6.38, 4.50, 4.51, 4.70, 6.50, 7.10, 86, 92 2WD, 92 4WD, M 4035, M 4035 H

View part

ENGITECH Cylinder sleeve spacer ENT020013

Lower supporting flange seal/spacer x2mm fits: FENDT 380 GTA DEUTZ FAHR 4.71, DX 6.31, DX 6.38, 4.50, 4.51, 4.70, 6.50, 7.10, 86, 92 2WD, 92 4WD, M 4035, M 4035 H

View part

ENGITECH Cylinder sleeve spacer ENT020014

Lower supporting flange seal/spacer x3mm fits: FENDT 380 GTA DEUTZ FAHR 4.71, DX 6.31, DX 6.38, 4.50, 4.51, 4.70, 6.50, 7.10, 86, 92 2WD, 92 4WD, M 4035, M 4035 H

View part

ENGITECH Engine block gasket ENT020015

Engine block gasket 6081A fits: AG CHEM 1803, 8103, 1844, 3104, 4104, 8104 JOHN DEERE 640G III, 648G III, 6650, 748G II, 748G III, 7710, 7810, 7920, 8100 T, 8110, 8110 T, 8120, 8200 T, 8210

View part

ENGITECH Engine block gasket ENT020016

Engine block gasket 6081A fits: AG CHEM 1803, 8103, 1844, 3104, 4104, 8104 JOHN DEERE 640G III, 648G III, 6650, 748G II, 748G III, 7710, 7810, 7920, 8100 T, 8110, 8110 T, 8120, 8200 T, 8210

View part

ENGITECH Engine block gasket ENT020017

Engine block gasket fits: CASE IH 120 2WD, 120 4WD, 130 2WD, 130 4WD, 140 2WD, 140 4WD, 155 2WD, 155 4WD, 175 2WD, 175 4WD, 190 2WD, 190 4WD NEW HOLLAND TM 115, TM 120, TM 120 BRAZIL

View part

ENGITECH Engine block gasket ENT020018

Engine block gasket fits: CASE IH 1822, 1844, 1896, 2294, 2394, 580 K, 580 L, 580 SE, 580 SK, 580 SL, 5110, 5120, 5120 A, 5130, 5130 A, 5140, 5140 A, 5150, 5150 A, 5220, 5230, 5240, 5250

View part

ENGITECH Engine block gasket ENT020019

Engine block gasket fits: FENDT 1 FARMER, 2 D FARMER, 2 DE FARMER, 2 S FARMER, 2 SA FARMER, 3 S FARMER, 3 S FAVORIT, 3 SA FARMER, 3 SA FAVORIT, 4 S FARMER, 4 S FAVORIT, 4 SA FAVORIT

View part

ENGITECH Engine block gasket ENT020020

Engine block gasket fits: CASE IH 100 HYDRO, 1046, 1046 A, 1055, 1055 A, 1055 XL, 1055 XLA, 1056, 1056 A, 1056 XL, 1056 XLA, 1246, 1246 A, 1255, 1255 A, 1255 XL, 1255 XLA, 1420, 1455, 1455 A

View part

ENGITECH Engine block gasket ENT020021

Engine block gasket fits: CASE IH 323, 475, D 212, D 214, D 215, D 219, D 320, D 322, D 324, D 326, D 430, D 432, D 436, D 439, D 440, DED-3, DGD-4, DLD-2

View part

ENGITECH Engine block gasket ENT020022

Engine block gasket fits: BKS VDP 20, VDP 20 F CASE IH 323, 323 V, D 320, D 320 S, D 322, D 324, D 324 S, D 326, D 430, D 430 S, D 432, D 436, D 439, D 440, DED, DED-3, DGD-4

View part

ENGITECH Engine block gasket ENT020024

Engine block gasket (material: CV) fits: FENDT 1 FARMER, 2 D FARMER, 2 DE FARMER, 2 S FARMER, 2 SA FARMER, 3 S FARMER, 3 S FAVORIT, 3 SA FARMER, 3 SA FAVORIT, 4 S FARMER, 4 S FAVORIT

View part

ENGITECH Oil radiator seal ENT020025

Oil radiator seal 6T830 fits: CASE IH 180, 200, 210, 220, 240, 255, 7110, 7210, 7250, 8910, 8950

View part

ENGITECH Oil sump gasket ENT020027

Oil sump gasket fits: FENDT 390 GTA TOOL CARRIER, 395 GT TOOL CARRIER, 395 GTA TOOL CARRIER, F 390, F 390 GT, F 390 GTA (T390.220), F 395, F 395 GHA (T395.2400, F 395 GT, F 395 GTA (T395.220)

View part

ENGITECH Oil sump gasket ENT020028

Oil sump gasket fits: CASE IH 100 HYDRO, 258, 268, 268 B, 278, 2500, 2500 A, 2500 B, 2544, 3220, 3514 D, 454, 474, 475, 484, 485, 485 L, 485 XL, 495, 495 XL, 4210, 4210 LP, 4210 XL, 4220

View part

ENGITECH Oil sump gasket ENT020029

Oil sump gasket 6T830 fits: CASE IH 7110, 7120, 7130, 7140, 7210, 7230, 7240, 9110, 9210, 9230, 9240, 9310, 9330, 180, 200, 210, 220, 230, 240, 255

View part

Buying with Partios

Buying ENGITECH parts through Partios

Are these genuine ENGITECH parts?

Yes. Every ENGITECH line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source ENGITECH parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for ENGITECH lines that aren't currently available.

Do you supply ENGITECH parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on ENGITECH parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a ENGITECH order?

It depends on the line. Stocked ENGITECH items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for ENGITECH parts?

No. There's no minimum order value or quantity on a Partios trade account. Some ENGITECH lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account