Partios Wholesale catalogue

Engitech Distributor | Parts

CR injector elements (1,112) · Cylinder head gasket (724) · Fuel pump (478) · Valve cover gasket (343) · Fuel tank (298) · Piston (276) · Ignition leads set (243) · Complete engine gasket set (upper) (239) · 199 further part types (5,180)

9,085 current catalogue lines

About the ENGITECH range

Engitech spans several vehicle systems in the Partios catalogue: 9,085 lines across 207 part types, with no single area dominating. The largest groups are CR injector elements (1,112), cylinder head gasket (724), fuel pump (478), valve cover gasket (343) and fuel tank (298). They account for only 36% of the range, though. The other 5,662 lines sit across 201 further part types, which is what makes this a range to search rather than browse. That tail includes ignition leads set, complete engine gasket set (upper) and complete engine gasket set (full). Buyers are typically workshops, motor factors and exporters; a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. With 9,085 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

ENGITECH Thermostat gasket ENT011251

Coolant thermostat gasket fits: JOHN DEERE 5080R, 5080RN, 5090R, 5090RN, 5100RN, 6130 2WD, 6130 4WD, 6230 2WD, 6230 4WD, 6330 2WD, 6330 4WD, 6430 2WD, 6430 4WD, 6530 2WD, 6530 4WD, 6534, 6630

View part

ENGITECH Turbocharger gasket ENT011252

Turbocharger gasket fits: JOHN DEERE 130 P, 130G, 160P, 180G, 200G, 210L, 210P, 250G, 250P, 290G, 300G, 300P, 310K, 310L, 310SK, 315SL, 337E, 344K, 344L, 344P, 408R, 410K, 410L, 437E, 444G

View part

ENGITECH Water pump gasket ENT011253

Water pump gasket fits: ANTONIO CARRARO 3000 ASV INCORPORATED 4500, 4501 ATLAS AR 30, AR 35, AR 35 SUPER, AR 40, QLT H40, XAS 90 BELL 310 SG, 315 SG BENFRA 9.01B BOBCAT 975 CASE IH 15

View part

ENGITECH Exhaust manifold gasket ENT011254

Exhaust manifold gasket fits: DEUTZ FAHR 7545 RTS, 400, M 41/20, 8 XL

View part

ENGITECH Exhaust manifold gasket ENT011254/3

Exhaust manifold gasket (quantity per packaging: 3pcs, price per: 3pcs,) fits: DEUTZ FAHR 7545 RTS, 400, M 41/20, 8 XL

View part

ENGITECH Valve cover gasket ENT011255

Rocker cover gasket fits: FENDT 307 C FARMER, 307 C TURBO FARMER, 307 CA FARMER, 307 CI FARMER 2WD, 307 CI FARMER 4WD, 308 C FARMER, 308 CA FARMER, 308 CI FARMER, 308 FARMER

View part

ENGITECH Cylinder head gasket ENT011256

Cylinder head gasket fits: AHLMANN AF60E, AS50 AMMANN AFT270 E, AFT270 G, AFW270 E, AFW270 G, ARP35, PW2700 ATLAS XAS 67 DD, XAS 67 DDG, XAS 97 DD, XAS 97 DDG, XATS 67 DD, XATS 77 DD

View part

ENGITECH Exhaust manifold gasket ENT011257

Exhaust manifold gasket fits: JOHN DEERE 5300, 5310, 5400, 5410, 5500, 5510, 5620, 5720, 5820, 6010, 6020, 6105M, 6110, 6110M, 6120, 6125 M, 6205, 6210, 6220, 6300, 6310, 6320, 6330, 6410

View part

ENGITECH Exhaust manifold gasket ENT011258

Exhaust manifold gasket fits: ABG 140 AHLMANN AS16 ATLAS 2002, 2502B CASE IH 220CK, 300CK, 300CL, 350CK DEUTZ FAHR M 35.80 HYDROMAT, M 36.10 HYDROMAT, M 36.30 HYDROMAT, MH 650

View part

ENGITECH Exhaust manifold gasket ENT011258/5

Exhaust manifold gasket (quantity per packaging: 5pcs, price per: 5pcs,) fits: ABG 140 AHLMANN AS16 ATLAS 2002, 2502B CASE IH 220CK, 300CK, 300CL, 350CK DEUTZ FAHR M 35.80 HYDROMAT

View part

ENGITECH Valve cover gasket ENT011259

Rocker cover gasket fits: DEUTZ FAHR 7545 RTS, 400, M 41/20, 8 XL KAMAZ 65226

View part

ENGITECH Valve cover gasket ENT011259/6

Rocker cover gasket (quantity per packaging: 6pcs, price per: 6pcs,) fits: DEUTZ FAHR 7545 RTS, 400, M 41/20, 8 XL KAMAZ 65226

View part

ENGITECH Valve cover gasket ENT011260

Rocker cover gasket fits: AHLMANN AL100, AL100T, AL100TI, AL70E, AL80, AL85T, AZ90 T AMMANN AFT350 E, AFT350 G, AFW350 E, AFW350 G ATLAS QAX 45 240V-3PH, QAX 70 240V-3PH, XAHS 107 C3

View part

ENGITECH Valve cover gasket ENT011261

Rocker cover gasket fits: DEUTZ FAHR 7545 RTS, 400, M 41/20, 8 XL KAMAZ 65226

View part

ENGITECH Valve cover gasket ENT011261/6

Rocker cover gasket (quantity per packaging: 6pcs, price per: 6pcs,) fits: DEUTZ FAHR 7545 RTS, 400, M 41/20, 8 XL KAMAZ 65226

View part

ENGITECH Cylinder head gasket ENT011262

Cylinder head gasket fits: AHLMANN AF60E, AS50 AMMANN AFT270 E, AFT270 G, AFW270 E, AFW270 G, ARP35, PW2700 ATLAS XAS 67 DD, XAS 67 DDG, XAS 97 DD, XAS 97 DDG, XATS 67 DD, XATS 77 DD

View part

ENGITECH Turbocharger gasket ENT011264

Turbocharger gasket fits: DEUTZ FAHR 100, 120, 140, 105, 108, 1130 TTV, 1145 TTV, 1160 TTV, 118, 120 MK2, 120 MK3, 128, 130, 135 MK3, 150, 150 MK3, 150.7, 155, 160 MK3, 165, 165 MK3, 165.7

View part

ENGITECH Cylinder head gasket ENT011265

Cylinder head gasket fits: FIAT 1580, 1580 DT, 1880, 1880 DT, 160-90, 160-90 DT, 180-90, 180-90 DT, 315, 315 R, FE28, FE28HD, FE28LC, FE28M, FE28MHD HITACHI DX175, DX195L, FR160

View part

ENGITECH Valve cover gasket ENT011266

Rocker cover gasket fits: CASE IH 115, 125, 140, 135, 155, 165, 165 CVX, 180, 180 CVX, 195, 195 CVX, 210, 210 CVX, 225 CVX

View part

ENGITECH Cylinder head gasket ENT011267

Cylinder head gasket fits: NEW HOLLAND T6030, T6050, T6070, T6080, T7030, T7040, T7050, T7060 STEYR 6165 CVT, 6200 CVT, 6125 PROFI, 6140 PROFI DAF FA 65.180, FA 65.220, FA 65.250

View part

ENGITECH Cylinder head gasket ENT011268

Cylinder head gasket (thickness: 1,25mm) fits: DAF FA 45.130, FA 45.150, FA 45.170, FA 55.170, SB 120 IVECO 100 E 17, 100 E 17 DP tector, 100 E 18 tector, 100 E 17 K tector

View part

ENGITECH Valve cover gasket ENT011269

Rocker cover gasket fits: JOHN DEERE 120D, 130 P, 130G, 160D, 160P, 180G, 200G, 210K EP, 210L, 210L EP, 210LJ, 210P, 310J, 310K, 310L, 310L EP, 310P, 310SJ, 310SK, 315SK, 315SL, 344J, 410J

View part

ENGITECH Cylinder head gasket ENT011271

Cylinder head gasket fits: AHLMANN AL100, AL100T, AL100TI, AL70E, AL80, AL85T, AZ90 T ATLAS QAX 45 240V-3PH, QAX 70 240V-3PH, XAS 137 C2 GEKO 40010 ED-S/DEDA JLG 1200SJP, 1350SJP, 800S

View part

ENGITECH Cylinder head gasket ENT011272

Cylinder head gasket fits: JOHN DEERE 2020, 2510

View part

ENGITECH Cylinder head gasket ENT011273

Cylinder head gasket fits: FIAT 446, 466 2WD, 466 4WD, 480, 480 DT, 500, 500 DT, 540, 540 DT, 55-46, 55-46 DT, 55-56, 55-56 DT, 55-66, 55-66 DT, 55-88, 55-88 DT, 55-90, 55-90 DT, 466

View part

ENGITECH Complete engine gasket set (upper) ENT011274

Complete engine gasket set (up) fits: JOHN DEERE 7180, 7250, 8130 2WD, 8130 4WD, 8225 R, 8230, 8230 T, 8245 R, 8270 R, 8295 R, 8295 RT, 8310 R, 8310 RT, 8320 R, 8320 RT, 8330, 8330 T

View part

ENGITECH Cylinder head gasket ENT011275

Cylinder head gasket (thickness: 1,15mm) fits: CASE IH 430, 440, 445, 450, 465, 580 M, 580 N, 90, 90 2WD, 90 4WD, 95, 95 2WD, 95 4WD, 1085 C, 1095 C, 105, 1070, 1080, 1090, 1100, 115, 75, 85

View part

ENGITECH Intake manifold gasket ENT011276

Suction manifold gasket fits: JOHN DEERE 560, 660, 670, 650

View part

ENGITECH Timing gear housing gasket ENT011277

Timing gear housing gasket fits: JOHN DEERE 1165, 1175, 1450, 1550, 1850, 200 C, 2054, 2254, 2256, 2258, 310E, 310G, 310J, 310SE, 310SG, 310SJ, 344H, 344J, 360DC, 3215, 3220, 3300, 3420, 3800

View part

ENGITECH Turbocharger gasket ENT011278

Turbocharger gasket fits: JOHN DEERE 100, 110, 120C, 120D, 130 P, 130G, 160D, 160P, 180G, 1010G, 1020, 1030, 1030 OU, 1030CU, 1030VU, 1032, 1042, 1052, 1055, 1065, 1068H, 1072, 1075, 1075 H

View part

ENGITECH Timing gear housing gasket ENT011279

Timing gear housing gasket fits: JOHN DEERE 200 C LC, 200 LC, 230 C LC, 230 LC, 270 C LC, 360DC, 360DG, 460DC, 460DG, 4995, 540G II, 540G III, 544K, 548G II, 548G III, 624E, 624G, 624H, 624H LL

View part

ENGITECH Cylinder head gasket ENT011280

Cylinder head gasket fits: IVECO 100 E 15, 100 E 15 P, 100 E 15 K, 100 E 18, 100 E 18 P, 100 E 18 K, 100 E 21, 100 E 21 P, 120 E 15, 120 E 15 K, 120 E 18, 120 E 18 P, 120 E 18 H, 120 E 18 K

View part

ENGITECH Intake manifold gasket ENT011281

Suction manifold gasket fits: JOHN DEERE 6650, 6750, 6850, 6950, 7200, 7300, 7350, 7380, 7400, 7450, 7500, 7550, 7700, 7750, 7800, 8200, 8300, 8400, 8500, 8600, 9100, 9120, 9200, 9220, 9300

View part

ENGITECH Cylinder head gasket ENT011282

Cylinder head gasket fits: AEBI TT 50, TT 60, TT 80, TP37 BOBCAT 100 HITACHI EX35 HOLDER 230, 2.34, 240, 2.42, 330 KUBOTA B 2910 HSD, B 7800 HSD, 3680, KX 61-3, KX 71 H, KX 71-3

View part

ENGITECH Cylinder head gasket ENT011283

Cylinder head gasket fits: KUBOTA B 2400, B 2410 HSD, B 2410 HSE

View part

ENGITECH Valve cover gasket ENT011284

Rocker cover gasket fits: CASE IH 110, 120, 130 NEW HOLLAND T6020 ELITE, T6040 ELITE, T6060 ELITE, T6.120 2WD, T6.120 4WD, T6.140 2WD, T6.140 4WD, T6.150 2WD, T6.150 4WD, T6.160 2WD

View part

ENGITECH Cylinder head gasket ENT011285

Cylinder head gasket fits: FIAT 600 2WD, 600 4WD, 640, 640 DT, 666, 666 DT, 670, 680, 680 DT, 65-46, 65-46 DT, 65-56, 65-56 DT, 65-66, 65-66 DT, 65-66S, 65-88, 65-88 DT, 65-90, 65-90 DT

View part

ENGITECH Cylinder head gasket ENT011286

Cylinder head gasket fits: IVECO 60 E 10, 60 E 12, 60 E 14, 60 E 14 P, 60 E 14 K, 65 E 10, 65 E 10 K, 65 E 12, 65 E 12 P, 65 E 12 K, 65 E 14, 65 E 14 P, 65 E 14 K, 75 E 12, 75 E 12 P

View part

ENGITECH Valve cover gasket ENT011287

Rocker cover gasket fits: IVECO 100 E 17, 100 E 17 DP tector, 100 E 18 tector, 100 E 17 K tector, 100 E 17 DK tector, 100 E 18 K tector, 100 E 18 tector, 100 E 18 P tector, 100 E 18 FP tector

View part

ENGITECH Cylinder head gasket ENT011288

Cylinder head gasket fits: KUBOTA B 2910 HSD

View part

ENGITECH Valve cover gasket ENT011289

Rocker cover seal fits: NEW HOLLAND CR7.90, CR9060, 6090, 7080, 7090, 8040, 8050, 8060, 8070, 8080, CX6.90, CX8.70, CX8.80, CX8.85

View part

ENGITECH Valve cover gasket ENT011290

Rocker cover gasket fits: MASSEY FERGUSON 5465, 5475, 6465, 6475, 6480, 7465, 7475, 7480

View part

ENGITECH Intake manifold gasket ENT011291

Suction manifold gasket fits: JOHN DEERE 50DLC, 7250, 7250 R, 7260 R, 7270 R, 7280 R, 7290 R, 8130 2WD, 8225 R, 8230, 8230 T, 8235 R, 8260 R, 8270 R, 8295 R, 8295 RT, 8310 R, 8310 RT, 8320 R

View part

ENGITECH Timing gear housing gasket ENT011292

Timing gear housing gasket fits: JOHN DEERE 1165, 1450, 1550, 210LE, 280, 2254, 310G, 310J, 310SG, 360DC, 3215, 3220, 3420, 3800, 410E, 410G, 450H, 485E, 486E, 488E, 540G II, 540G III, 548G II

View part

ENGITECH Cylinder head gasket ENT011293

Cylinder head gasket fits: FENDT 520 XYLON, 522 XYLON, 524 XYLON IVECO 100 E 15, 100 E 15 P, 100 E 18, 100 E 18 P, 100 E 18 K, 120 E 15, 120 E 15 K, 120 E 18, 120 E 18 P, 120 E 18 H

View part

ENGITECH Exhaust manifold gasket ENT011295

Exhaust manifold gasket fits: URSUS 380, 380 M BOBCAT 360, 470 CATERPILLAR 420E, 430 E, 450 E, 914 G, AP500F, AP555E, AP555F, BG500E, CB64, CP44, CS54, CS64B, D3K, D3K II, D4K II, D5K

View part

ENGITECH Cylinder head gasket ENT011296

Cylinder head gasket fits: CATERPILLAR 236B2, 236B3, 242B, 246C, 252B2, 252B3, 256C, 259B, 262C, 272C, 277C, 279C, 289C, 297C, 299C, 308E CR, 308E SR

View part

ENGITECH Valve stem gasket/seal ENT011297

Valve stem gasket/seal fits: BOBCAT 975 CLAAS 546, 556, 566, 456 RA, 456 RC, 456 RX DITCH WITCH 100 JOHN DEERE 1570, 200 C LC, 200 LC, 230 C LC, 230 LC, 270 C LC, 344G, 360DC, 360DG, 430

View part

Buying with Partios

Buying ENGITECH parts through Partios

Are these genuine ENGITECH parts?

Yes. Every ENGITECH line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source ENGITECH parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for ENGITECH lines that aren't currently available.

Do you supply ENGITECH parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on ENGITECH parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a ENGITECH order?

It depends on the line. Stocked ENGITECH items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for ENGITECH parts?

No. There's no minimum order value or quantity on a Partios trade account. Some ENGITECH lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account