Partios Wholesale catalogue

DID Distributor | Transmission & Driveline

Chain (778) · Timing chain (458) · Rolls and clamps of drive chain (74) · Garage accessories (3)

1,427 current catalogue lines

About the DID range

Partios carries 1,427 DID lines, almost all transmission & driveline. It has 778 of them under a single part type, chain. Behind it the largest groups are timing chain (458), rolls and clamps of drive chain (74) and garage accessories (3). That is the complete range. Four part types in total. The range suits transmission specialists, workshops and motor factors. Driveline work is high-value and usually planned, so buyers tend to source the whole job at once. 1,427 lines is enough depth to cover the usual applications without a second source. Wholesale pricing on the full DID range shows once a trade account is approved.

Catalogue products

Vehicle references are indicative — confirm against the article number.

DID Chain DID428AD134

Chain 428 AD standard, number of links: 134, sealing type: Non-o-ring, steel, connection type: pin fits: HONDA CBR HUSQVARNA WXE SUZUKI DR, DR-Z, RV YAMAHA DT, WR 50/125/250 1985-2016

View part

DID Chain DID428AD136

Chain 428 AD standard, number of links: 136, sealing type: Non-o-ring, steel, connection type: pin fits: APRILIA RS4 HUSQVARNA SMR, SMS4-TE YAMAHA TDR 125 1989-2017

View part

DID Chain DID428AD138

Chain 428 AD standard, number of links: 138, sealing type: Non-o-ring, steel, connection type: pin

View part

DID Chain DID428AD140

Chain 428 AD standard, number of links: 140, sealing type: Non-o-ring, steel, connection type: pin fits: CAGIVA SST DERBI BAJA, CROSS CITY, SENDA HONDA CBR, CRE, VT, XR HUSQVARNA TE 50-400

View part

DID Chain DID428D-100

Chain 428 D standard, number of links: 100, sealing type: Non-o-ring, steel, connection type: pin fits: SUZUKI FL 125 2008-2008

View part

DID Chain DID428D-102

Chain 428 D standard, number of links: 102, sealing type: Non-o-ring, steel, connection type: pin

View part

DID Chain DID428D-106

Chain 428 D standard, number of links: 106, sealing type: Non-o-ring, steel, connection type: pin

View part

DID Chain DID428D-110

Chain 428 D standard, number of links: 110, sealing type: Non-o-ring, steel, connection type: pin

View part

DID Chain DID428D-142

Chain 428 D standard, number of links: 142, sealing type: Non-o-ring, steel, connection type: pin fits: APRILIA RX HONDA CRE SUZUKI VL 50/125 2000-2018

View part

DID Chain DID428D-146

Chain 428 D standard, number of links: 146, sealing type: Non-o-ring, steel, connection type: pin

View part

DID Chain DID428D-78

Chain 428 D standard, number of links: 78, sealing type: Non-o-ring, steel, connection type: pin

View part

DID Chain DID428D-96

Chain 428 D standard, number of links: 96, sealing type: Non-o-ring, steel, connection type: pin

View part

DID Chain DID428D-98

Chain 428 D standard, number of links: 98, sealing type: Non-o-ring, steel, connection type: pin

View part

DID Chain DID428D(ROLA4800OGNIW)

Chain 428 D standard, number of links: 4800, sealing type: Non-o-ring, steel, connection type: pin

View part

DID Chain DID428D108

Chain 428 D standard, number of links: 108, sealing type: Non-o-ring, steel, connection type: pin fits: HONDA CBR 125 2011-2016

View part

DID Chain DID428D112

Chain 428 D standard, number of links: 112, sealing type: Non-o-ring, steel, connection type: pin fits: HONDA CB, CG, CLR, CRF KAWASAKI KE YAMAHA YZ 80/100/125 1978-2018

View part

DID Chain DID428D114

Chain 428 D standard, number of links: 114, sealing type: Non-o-ring, steel, connection type: pin fits: HONDA CG, CM, CR SUZUKI GN, TS, TU 80/125 1981-2000

View part

DID Chain DID428D116

Chain 428 D standard, number of links: 116, sealing type: Non-o-ring, steel, connection type: pin fits: HONDA CD, CG SUZUKI GS YAMAHA TT-R 125 1979-2012

View part

DID Chain DID428D118

Chain 428 D standard, number of links: 118, sealing type: Non-o-ring, steel, connection type: pin fits: HONDA CBF, CRF, XR KTM SX, XC SUZUKI RM, TF YAMAHA YBR, YZ 80-125 1981-2020

View part

DID Chain DID428D120

Chain 428 D standard, number of links: 120, sealing type: Non-o-ring, steel, connection type: pin fits: HONDA CM, XL YAMAHA SR, TW, XT, YBA, YZ 80-225 1979-2016

View part

DID Chain DID428D122

Chain 428 D standard, number of links: 122, sealing type: Non-o-ring, steel, connection type: pin fits: CAGIVA ELEFANT, SXT HONDA CB KAWASAKI D-TRACKER, KLX KTM SX SUZUKI DR 85-200 1978-2020

View part

DID Chain DID428D124

Chain 428 D standard, number of links: 124, sealing type: Non-o-ring, steel, connection type: pin fits: HONDA CBR HUSQVARNA TC KAWASAKI KLX, KMX KTM SX SUZUKI GN, GS 85/125/250 1986-2020

View part

DID Chain DID428D126

Chain 428 D standard, number of links: 126, sealing type: Non-o-ring, steel, connection type: pin fits: HONDA CBZ, CR KAWASAKI KLX SUZUKI TSX YAMAHA AG, TW, XT 80-200 1984-2014

View part

DID Chain DID428D128

Chain 428 D standard, number of links: 128, sealing type: Non-o-ring, steel, connection type: pin fits: HONDA CBR, NX, XL KTM XC YAMAHA TT-R, XT 85-400 1984-2018

View part

DID Chain DID428D130

Chain 428 D standard, number of links: 130, sealing type: Non-o-ring, steel, connection type: pin fits: HONDA MTX, XLR KAWASAKI KLX SUZUKI DR, RG, TSR YAMAHA FZR, SR 80-500 1983-2017

View part

DID Chain DID428D132

Chain 428 D standard, number of links: 132, sealing type: Non-o-ring, steel, connection type: pin fits: HONDA XR HUSQVARNA TE KAWASAKI BN, ELIMINATOR, NINJA, Z SUZUKI GZ 125/150/250 1995-2020

View part

DID Chain DID428D134

Chain 428 D standard, number of links: 134, sealing type: Non-o-ring, steel, connection type: pin fits: HONDA CBR HUSQVARNA WXE SUZUKI DR, DR-Z, RV YAMAHA DT, WR 50/125/250 1985-2016

View part

DID Chain DID428D136

Chain 428 D standard, number of links: 136, sealing type: Non-o-ring, steel, connection type: pin fits: APRILIA RS4 CAGIVA SST HUSQVARNA SMR, SMS4-TE YAMAHA TDR 125 1983-2017

View part

DID Chain DID428D138

Chain 428 D standard, number of links: 138, sealing type: Non-o-ring, steel, connection type: pin fits: HONDA CRE 50 2003-2004

View part

DID Chain DID428D140

Chain 428 D standard, number of links: 140, sealing type: Non-o-ring, steel, connection type: pin fits: CAGIVA SST DERBI BAJA, CROSS CITY, SENDA HONDA CBR, CRE, VT, XR HUSQVARNA TE 50-400

View part

DID Chain DID428D144

Chain 428 D standard, number of links: 144, sealing type: Non-o-ring, steel, connection type: pin

View part

DID Chain DID428NZ-142

Chain 428 NZ strengthened, number of links: 142, sealing type: Non-o-ring, steel, connection type: pin

View part

DID Chain DID428NZ-144

Chain 428 NZ strengthened, number of links: 144, sealing type: Non-o-ring, steel, connection type: pin

View part

DID Chain DID428NZ-80

Chain 428 NZ strengthened, number of links: 80, sealing type: Non-o-ring, steel, connection type: pin

View part

DID Chain DID428NZ-88

Chain 428 NZ strengthened, number of links: 88, sealing type: Non-o-ring, steel, connection type: pin

View part

DID Chain DID428NZ-92

Chain 428 NZ strengthened, number of links: 92, sealing type: Non-o-ring, steel, connection type: pin

View part

DID Chain DID428NZ(ROLA4800OGNIW

Chain 428 NZ strengthened, number of links: 4800, sealing type: Non-o-ring, steel, connection type: pin

View part

DID Chain DID428NZ100

Chain 428 NZ strengthened, number of links: 100, sealing type: Non-o-ring, steel, connection type: pin fits: HONDA CB, TRX YAMAHA T 90/105/125 1975-2016

View part

DID Chain DID428NZ102

Chain 428 NZ strengthened, number of links: 102, sealing type: Non-o-ring, steel, connection type: pin fits: HONDA EZ 90 1993-1996

View part

DID Chain DID428NZ106

Chain 428 NZ strengthened, number of links: 106, sealing type: Non-o-ring, steel, connection type: pin fits: YAMAHA DT 200 1989-1995

View part

DID Chain DID428NZ108

Chain 428 NZ strengthened, number of links: 108, sealing type: Non-o-ring, steel, connection type: pin fits: YAMAHA DT 80 1984-1984

View part

DID Chain DID428NZ110

Chain 428 NZ strengthened, number of links: 110, sealing type: Non-o-ring, steel, connection type: pin fits: HONDA CG KAWASAKI KE SUZUKI RM YAMAHA DT, RS, YZ 65-125 1976-2005

View part

DID Chain DID428NZ112

Chain 428 NZ strengthened, number of links: 112, sealing type: Non-o-ring, steel, connection type: pin fits: HONDA CG, CLR, CM, CRF KAWASAKI KE YAMAHA YZ 80-200 1980-2018

View part

DID Chain DID428NZ114

Chain 428 NZ strengthened, number of links: 114, sealing type: Non-o-ring, steel, connection type: pin fits: HONDA CG SUZUKI GN 125 1991-1999

View part

DID Chain DID428NZ116

Chain 428 NZ strengthened, number of links: 116, sealing type: Non-o-ring, steel, connection type: pin fits: DAELIM ALTINO, VC HONDA CD, CG, CR KAWASAKI AR, KE KYMCO PULSAR 80-175 1979-2012

View part

DID Chain DID428NZ118

Chain 428 NZ strengthened, number of links: 118, sealing type: Non-o-ring, steel, connection type: pin fits: HONDA CBF, CRF, XR KAWASAKI KE, KX KTM SX, XC SUZUKI GP, RM, TF 80-175 1975-2020

View part

DID Chain DID428NZ118ZB

Chain 428 NZ strengthened, number of links: 118, sealing type: Non-o-ring, steel, connection type: pin fits: SUZUKI RM 85 2002-2010

View part

DID Chain DID428NZ120

Chain 428 NZ strengthened, number of links: 120, sealing type: Non-o-ring, steel, connection type: pin fits: HONDA CM KAWASAKI KX SUZUKI RM YAMAHA SR, TW, XT, YBA, YZ 80-225 1982-2016

View part

Buying with Partios

Buying DID parts through Partios

Are these genuine DID parts?

Yes. Every DID line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source DID parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for DID lines that aren't currently available.

Do you supply DID parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on DID parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a DID order?

It depends on the line. Stocked DID items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for DID parts?

No. There's no minimum order value or quantity on a Partios trade account. Some DID lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account