Partios Wholesale catalogue

Dana Spicer Distributor | Transmission & Driveline

Differential element (19,579) · Gearbox element (4,857) · Drive shaft (2,661) · Rear differential input flange (498) · Differential seal, rear (453) · Tie rod end (386) · Synchromesh element (249) · Reaction bar (148) · 76 further part types (1,343)

36,785 current catalogue lines

About the DANA SPICER range

Partios carries 36,785 Dana Spicer lines, almost all transmission & driveline. It has 19,579 of them under a single part type, differential element. Behind it the largest groups are gearbox element (4,857), drive shaft (2,661), rear differential input flange (498), differential seal, rear (453) and tie rod end (386). Those six account for most of the catalogue; the remaining 1,740 lines are spread across 78 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes synchromesh element, reaction bar and wheel reduction gear repair kit. The range suits transmission specialists, workshops and motor factors. Driveline work is high-value and usually planned, so buyers tend to source the whole job at once. A range this size, with 36,785 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

DANA SPICER Differential element 005.09.1364

Differential element fits: DANA SPICER

View part

DANA SPICER Differential element 005.09.1553

Differential element fits: DANA SPICER

View part

DANA SPICER Differential element 005.09.2244

Differential element fits: DANA SPICER

View part

DANA SPICER Input shaft bearing 005.09.2246

Input shaft bearing fits: DANA SPICER

View part

DANA SPICER Differential element 005.09.2744

Differential element fits: DANA SPICER

View part

DANA SPICER Differential element 005.09.2802

Differential element fits: DANA SPICER

View part

DANA SPICER Differential bearing 005.09.2938-DS

Differential bearing fits: DANA SPICER

View part

DANA SPICER Differential element 005.09.2957

Differential element fits: DANA SPICER

View part

DANA SPICER Differential element 005.09.3366-DS

Differential element fits: DANA SPICER

View part

DANA SPICER Differential element 005.09.3372

Differential element fits: DANA SPICER

View part

DANA SPICER Input shaft bearing 005.09.3707

Input shaft bearing fits: DANA SPICER

View part

DANA SPICER Differential element 005.09.3785

Differential element fits: DANA SPICER

View part

DANA SPICER Differential element 005.09.3816

Differential element fits: DANA SPICER

View part

DANA SPICER Differential element 005.09.3817

Differential element fits: DANA SPICER

View part

DANA SPICER Differential element 005.09.4180

Differential element fits: DANA SPICER

View part

DANA SPICER Differential element 005.09.4707

Differential element fits: DANA SPICER

View part

DANA SPICER Input shaft bearing 005.10.0162

Input shaft bearing 44,45/88,9x30,162mm fits: DANA SPICER

View part

DANA SPICER Industrial bearing 005.10.0497-DS

34,925x72,233x25,4 bearing conical (1pcs)

View part

DANA SPICER Differential element 005.10.1035-DANA

Differential element fits: JCB 3CX, 4CX

View part

DANA SPICER Differential element 005.10.1072

Differential element fits: DANA SPICER

View part

DANA SPICER Differential element 005.10.1073

Differential element fits: DANA SPICER

View part

DANA SPICER Differential element 005.10.1074

Differential element fits: DANA SPICER

View part

DANA SPICER Differential bearing 005.10.1285-DS

Differential bearing fits: DANA SPICER

View part

DANA SPICER Differential element 005.10.1286

Differential element fits: DANA SPICER

View part

DANA SPICER Differential element 005.10.1380

Differential element, bearing fits: DANA SPICER, CASE IH 21F, FARMLIFT 525, FARMLIFT 526 HYUNDAI R55W-7 NEW HOLLAND LM 5020, LM 5030, LM 5.25, LM 625, LM 6.28, TH 5.26, 50C

View part

DANA SPICER Differential element 005.10.1381

Differential element fits: DANA SPICER

View part

DANA SPICER Differential element 005.10.1382

Differential element fits: DANA SPICER

View part

DANA SPICER Differential element 005.10.1394

Differential element fits: DANA SPICER

View part

DANA SPICER Wheel bearing 005.10.1427-DS

Wheel bearing - single fits: FENDT 600, 800, 900 JOHN DEERE 100, 1000, 200, 300, 400, 500, 600, 6000, 700, 7000, S VALTRA BM, M, N, T

View part

DANA SPICER Input shaft bearing 005.10.1457

Input shaft bearing fits: DANA SPICER

View part

DANA SPICER Input shaft bearing 005.10.1458

Input shaft bearing fits: DANA SPICER

View part

DANA SPICER Differential element 005.10.2958

Differential element fits: DANA SPICER

View part

DANA SPICER Differential element 005.10.2959

Differential element fits: DANA SPICER

View part

DANA SPICER Industrial bearing 005.10.3166-DANA

109,538x158,75x23,02 bearing conical (1pcs)

View part

DANA SPICER Input shaft bearing 005.10.3180

Input shaft bearing fits: DANA SPICER

View part

DANA SPICER Differential element 005.10.3267

Differential element fits: DANA SPICER

View part

DANA SPICER Differential element 005.10.3268

Differential element fits: DANA SPICER

View part

DANA SPICER Differential element 005.10.3365-DS

Differential element fits: DANA SPICER

View part

DANA SPICER Industrial bearing 005.10.3527-DS

30,162x64,292x21,433 bearing conical, ne-rowed (1pcs)

View part

DANA SPICER Wheel bearing 005.10.3613

Wheel bearing fits: CATERPILLAR M FIAT M FORD 8000, TM JOHN DEERE 200, 300, 500, 600, 6000, 700, 7000 LANDINI 10000, 4000, 500, 60, 6000, 70, 7000, 80, 8000, 90, 9000, ADVANTAGE, ATLANTIS

View part

DANA SPICER Input shaft bearing 005.10.3676

Differential element fits: DANA SPICER

View part

DANA SPICER Differential element 005.10.3678

Differential element fits: DANA SPICER

View part

DANA SPICER Differential element 005.10.3691-DS

Differential element (bearing) fits: AGCO CLAAS DANA SPICER RENAULT

View part

DANA SPICER Input shaft bearing 005.10.3694

Input shaft bearing fits: DANA SPICER, JOHN DEERE 6000

View part

DANA SPICER Differential element 005.10.3695

Differential element fits: DANA SPICER

View part

DANA SPICER Input shaft bearing 005.10.3697-DS

Input shaft bearing fits: DANA SPICER, JOHN DEERE 6000, 6M, 6R, 7000

View part

DANA SPICER Differential element 005.10.3708

Differential element fits: DANA SPICER

View part

DANA SPICER Input shaft bearing 005.10.3709-DS

Input shaft bearing fits: DANA SPICER

View part

Buying with Partios

Buying DANA SPICER parts through Partios

Are these genuine DANA SPICER parts?

Yes. Every DANA SPICER line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source DANA SPICER parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for DANA SPICER lines that aren't currently available.

Do you supply DANA SPICER parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on DANA SPICER parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a DANA SPICER order?

It depends on the line. Stocked DANA SPICER items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for DANA SPICER parts?

No. There's no minimum order value or quantity on a Partios trade account. Some DANA SPICER lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account