Partios Wholesale catalogue

CVA Distributor | Parts

Door window (1,088) · Windscreen (872) · Side window (853) · Rear window (605) · Boom pin (289) · Bucket pin (151) · Boon sleeve (150) · Boom/arm/bucket seal (oil-seal) (148) · 239 further part types (1,793)

6,292 current catalogue lines

About the CVA range

CVA spans several vehicle systems in the Partios catalogue: 6,292 lines across 247 part types, with no single area dominating. The largest groups are door window (1,088), windscreen (872), side window (853), rear window (605) and boom pin (289). Beyond those, 2,091 lines are spread across 241 further part types. That tail includes boon sleeve, boom/arm/bucket seal (oil-seal) and stabilizers and elements. Buyers are typically workshops, motor factors and exporters; a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. With 6,292 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

CVA Hydraulic cylinder repair kit 991/20022 CVA

Servomotor sealing kit fits: JCB 214, 214 E, 214SM-4, 215-4, 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC, 426, 426B, 804, 804 Super, 8030 ZTS, 8052, 8080

View part

CVA Boom/arm/bucket seal (oil-seal) 991/20023 CVA

Bucket/arm oil seal

View part

CVA Boom/arm/bucket seal (oil-seal) 991/20024 CVA

Bucket/arm oil seal set fits: JCB 2CX, 3CX

View part

CVA Boom/arm/bucket seal (oil-seal) 991/20028 CVA

Bucket/arm oil seal fits: JCB 3CX, 4CX

View part

CVA Hydraulic cylinder repair kit 991/20029 W

Hydraulic actuator repair kit

View part

CVA Hydraulic cylinder repair kit 991/20030 CVA

Hydraulic actuator repair kit fits: JCB 2CX, 2CXL, 2CXS, 2CXSL, 2CX-SMO, 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC

View part

CVA Boom/arm/bucket seal (oil-seal) 991/20034 CVA

Bucket/arm oil seal (60x110mm) fits: JCB 8060, 8080

View part

CVA Boom/arm/bucket seal (oil-seal) 991/20038 W

Bucket/arm oil seal fits: JCB 3CX, 4CX, 535-140, 130

View part

CVA Boom/arm/bucket seal (oil-seal) 991/20039 CVA

Bucket/arm oil seal fits: JCB 214, 215, 217, 3CX, 3DX, 4C, 4CN, 4CX

View part

CVA Loader bucket and elements 993/99189

Bar and elements fits: JCB

View part

CVA Door window 9977601

View part

CVA Door window 9977602

View part

CVA Boom/arm/bucket seal (oil-seal) 998/10020 W

Bucket/arm oil seal fits: JCB 160, 180, 200, 210, 220

View part

CVA Bucket pin 9C0093 CVA

View part

CVA Brake pad set 9C0566 CVA

Brake pads set fits: CATERPILLAR 518, 528, 613C, 916, 936, 936E, 950, 950B, 950E, D300B, G936

View part

CVA Brake pad set 9C0567 CVA

Brake pads set fits: CATERPILLAR 65, 65 E, 613C, 613C II, 725, 730, 773 B, 776 C, 777B, 916, 936, 950B, 950E, D250D, D250E, D300D

View part

CVA Side window 9G1127 CVA

Side window behind the door/rear L/R sliding (hardened, height: 677mm, width:182mm) fits: CATERPILLAR D

View part

CVA Ignition switch 9G7641 CVA

Ignition switch fits: CATERPILLAR 416, 426, 428, 436, 438, 768C, 769C, 771C, 772 B, 773 B, 775 B, 777, 777B, 777C, 784 B, 784C, 785, 785 B, 785 D, 785C, 789, 789 B, 789C, 793, 793 B, 793 C, 797

View part

CVA Stabilizers and elements 9J2308 CVA

Stabilizers and elements fits: CATERPILLAR 205B, 206, 211B, 212, 212B, 215, 215B, 215BSA, 215D, 219, 219D, 224B, 235B, 235C, 235D, 245D, 320, 320L, 325, 325L, 330, 330 L, 950, 950B, 950E, 950F

View part

CVA Boon sleeve 9J7099 CVA

Dipper ram sleeve 89/102x95 fits: CATERPILLAR 900 950G/950G II/950H/950L/962G/962G Serie II/962H/962L/966E/966F/966F Serie II/966G/966G Serie II/966H/966K/966L/966M XE/970F/972G/972G Serie II/972H/972

View part

CVA V-Belt 9L1126 CVA

V-Belt (x1041mm) fits: CATERPILLAR 130G, 305.5E, 416 B, 426 B, 428 B, 908

View part

CVA V-Belt 9L1127 CVA

V-Belt fits: CATERPILLAR 205B, 214B, 574, 928G, AP1000B, AP1055B, AP900B, BG2455C, CS531C, CS533C, CS563C, CS573C, CS583C, 28G, M318, M320

View part

CVA V-Belt 9L2248 CVA

V-Belt (13x8x1219mm) fits: CATERPILLAR 318C, 319C, 320C, 322C, 950G, 962G, D6D, TH62, TH63, TH82, TH83

View part

CVA V-Belt 9L4896 CVA

View part

CVA V-Belt 9L6640 CVA

V-Belt (x1464mm) fits: CATERPILLAR 320B, 320BL, 322BL, 322C, M325B

View part

CVA Stabilizers and elements 9M1328 CVA

Stabilizers and elements fits: CATERPILLAR 930K, 938K, 950G, 950H, 950K, 950M, 962G, 966G, 966H, 966K, 966M, 972H, 972M

View part

CVA Loader bucket and elements 9N4353

Bar and elements, Tooth fits: CATERPILLAR

View part

CVA Loader bucket and elements 9N4353 CVA

Bar and elements, Tooth fits: CATERPILLAR

View part

CVA Loader bucket and elements 9N4452

Bar and elements, Tooth fits: CATERPILLAR 963, 963K, 973C, 973D, 980 G Serie II, 980G, 980G II, 980H, 980K, 988F II, 988G, 988H, 992G, M312

View part

CVA Loader bucket and elements 9N4453

Bar and elements, Tooth fits: CATERPILLAR 963, 963K, 973C, 973D, 980 G Serie II, 980G, 980G II, 980H, 980K, 988F II, 988G, 988H, 992G, M312

View part

CVA Drive shaft cross piece 9P0356 CVA

Drive shaft cross fits: CATERPILLAR 12H, 14G, 120H, 140H, 160H, 525B, 535B, 545, 545C, 613C, 793D, 35, 45, 55, 65, 65B, 65C, 65D, 75C, 85C, D10, D250E, D300E II, D6, D7H, D7R II, RM350, RM350B

View part

CVA Stabilizers and elements 9R0109 CVA

Stabilizers and elements, spacer washer fits: CATERPILLAR 302.5, 302.5C, 414 E, 416, 416 B, 416 C, 416 D, 416 E, 416 F, 420 D, 420 F, 420E, 422 E, 424 B, 424 D, 426, 426 B, 426 C, 428, 428 B, 428 C

View part

CVA Bucket sleeve 9R0111 CVA

Bucket sleeve 53mmx40mmx38mm fits: CATERPILLAR 416 B, 416 C, 416 D, 416 E, 420 D, 420E, 422 E, 424 D, 426 C, 428 D, 428 E, 430 D, 430 E, 432 D, 432 E, 434 E, 436 C, 438 C, 438 D, 442 D, 442 E

View part

CVA Bucket sleeve 9R0139 CVA

Bucket sleeve 68mmx55,5mmx38mm fits: CATERPILLAR 420 D, 428 B, 428 C, 428 E, 428 F, 428 F2, 432 D, 432 E, 432 F, 432 F2, 442 D, 442 E, 444F

View part

CVA Boon sleeve 9R0147 CVA

Dipper ram sleeve 45/58x40,5 fits: CATERPILLAR 400 424 D/428 B/428 D/428 F2/432 D/432 E/432 F/442 E

View part

CVA Boon sleeve 9R0153 CVA

Dipper ram sleeve 45/59x18 fits: CATERPILLAR 400 428/428 B/428 C/428 D/428 E/432/432 B/432 C/432 D/432 E/442 E

View part

CVA Boon sleeve 9R0162 CVA

Dipper ram sleeve 50/63x46 fits: CATERPILLAR 400 416/416 C/416 E/416 F/420 D/420 F/420E/422 E/424 B/424 B2/424 D/426/426 C/428/428 C/428 D/428 E/428 F/428 F2/430 D/430 E/430 F/430 F2/432 D/432 E/432 F

View part

CVA Boon sleeve 9R0170 CVA

Dipper ram sleeve 55,3/68,1x45 fits: CATERPILLAR 400 428 B/428 C/428 D/428 E/428 F/432 D/432 E/432 F/438 B/438 C/442 E/444 E/444F

View part

CVA Boon sleeve 9R0320 CVA

Dipper ram sleeve 45,3/58,1x23,5 fits: CATERPILLAR 300 307D/414 E/416/416 B/416 C/416 D/416 E/416 F/420 D/420 F/420E/422 E/424 B/424 D/426/426 B/426 C/428/428 B/428 C/428 D/428 E/428 F/430 D/430 E/430

View part

CVA Boon sleeve 9R0321 CVA

Dipper ram sleeve 40/53x20 fits: CATERPILLAR 400 428/428 B/428 C/428 D/428 E/432 D/432 E/442 D/442 E

View part

CVA Stabilizers and elements 9R0366 CVA

Spacer washer, washer fits: CATERPILLAR 428 B, 428 C, 428 D, 432 D, 438 B, 438 C, 442 D

View part

CVA Boon sleeve 9R0411 CVA

Dipper ram sleeve 45/58x34 fits: CATERPILLAR 400 416/416 B/416 C/416 D/416 E/416 F/420 D/420 F/420E/420F2/422 E/422 F/422F2/424 B/424 B2/424 D/426/426 B/426 C/426F2/427F2/428/428 B/428 C/428 D/428 E/4

View part

CVA Boon sleeve 9R0413 CVA

Dipper ram sleeve 65/78x48,5 fits: CATERPILLAR 400 428 B/428 C/428 D/428 E/428 F/432 D/432 E/432 F/442 D/444 E

View part

CVA Stabilizers and elements 9R0481 CVA

Stabilizers and elements, spacer washer fits: CATERPILLAR 416, 416 B, 416 C, 416 D, 416 E, 416 F, 420 D, 420 F, 420E, 422 E, 424 B, 424 D, 426, 426 B, 426 C, 428, 428 B, 428 C, 428 D, 428 E, 428 F

View part

CVA Boon sleeve 9R0614 CVA

Dipper ram sleeve 55/68x25 fits: CATERPILLAR 400 416/426/428/436/438

View part

CVA Boon sleeve 9R1107 CVA

Dipper ram sleeve 80/93x30 fits: CATERPILLAR 400 414 E/416/416 B/416 C/416 D/416 E/420 D/422 E/424 B/424 D/426/426 B/426 C/428/428 B/428 C/428 D/430 D/436 C/438 C

View part

CVA Drive shaft 9R1230 MO

Drive shaft fits: CATERPILLAR 426, 426 B, 428, 428 B, 436, 436 B, 438, 438 B

View part

CVA Boon sleeve 9R1494 CVA

Dipper ram sleeve 55/69x55 fits: CATERPILLAR 400 426/428/436/438

View part

Buying with Partios

Buying CVA parts through Partios

Are these genuine CVA parts?

Yes. Every CVA line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source CVA parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for CVA lines that aren't currently available.

Do you supply CVA parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on CVA parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a CVA order?

It depends on the line. Stocked CVA items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for CVA parts?

No. There's no minimum order value or quantity on a Partios trade account. Some CVA lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account