Partios Wholesale catalogue

CVA Distributor | Parts

Door window (1,088) · Windscreen (872) · Side window (853) · Rear window (605) · Boom pin (289) · Bucket pin (151) · Boon sleeve (150) · Boom/arm/bucket seal (oil-seal) (148) · 239 further part types (1,793)

6,292 current catalogue lines

About the CVA range

CVA spans several vehicle systems in the Partios catalogue: 6,292 lines across 247 part types, with no single area dominating. The largest groups are door window (1,088), windscreen (872), side window (853), rear window (605) and boom pin (289). Beyond those, 2,091 lines are spread across 241 further part types. That tail includes boon sleeve, boom/arm/bucket seal (oil-seal) and stabilizers and elements. Buyers are typically workshops, motor factors and exporters; a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. With 6,292 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

CVA Clutch disc 445/12307 CVA

Clutch disc/plate (139mm) fits: JCB 2CX, 2CXL, 2CXS, 2CXSL, 2CX-SMO, 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC, 5CX, 535-125, 535-140

View part

CVA Gearbox element 445/30009

View part

CVA Clutch disc 445/30011 CVA

Clutch disc/plate (133,1mm) fits: JCB 2CX, 2CXL, 2CXS, 2CXSL, 2CX-SMO, 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC, 5CX, 535-125, 535-140

View part

CVA Stabilizers and elements 4450280 CVA

Stabilizers and elements fits: CATERPILLAR 907H, 910M, 914K, 914M, 918M

View part

CVA Stabilizers and elements 4450281 CVA

Stabilizers and elements, rocker sleeve fits: CATERPILLAR 907H, 907M, 908H, 908K, 908M

View part

CVA Windscreen 4457160 CVA

Windscreen green (width: 830mm, height: 1025mm) fits: HITACHI EG, ZX JOHN DEERE 70

View part

CVA Boom/arm/bucket seal (oil-seal) 448/17201 CVA

Bucket/arm oil seal fits: JCB 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC, 5CX

View part

CVA Tie rod end 448/17902 CVA

Tie rod end (M28x1,5mm) fits: JCB 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CN, 4CX, 4CXC, 520, 520 LE, 520 S, 520 SLE, 520-2, 520-4, 520-50 LE, 520-55, 520-55 FS, 526, 528, 528-70

View part

CVA Differential element 448/26302 CVA

Differential element (sleeve 124,6mm x 114,6mm x) fits: JCB 520, 524-50, 535-140, 535-95, 536-70

View part

CVA Differential element 448/26402 CVA

Differential element (sleeve 115mm x 104mm x) fits: JCB 524-50, 526, 526-55, 527-55, 528-70, 530, 535-125, 535-140

View part

CVA Differential element 448/26404 CVA

Differential element (sleeve 125mm x 115mm x) fits: JCB 531-70, 533-105, 535-125, 535-140, 541-70

View part

CVA Windscreen 448607A1

View part

CVA Hydraulic coupler 45/910700 CVA

Hydraulic coupler fits: JCB 3CX, 3CX COMPACT, 3CX ECO CAB, 3CX HM, 3CX HMT, 3CX SITEMASTER, 3CX SM, 3CX SMT, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CX ECO CAB, 4CX M, 4CX SM, 4CX SUPER, 4CXC

View part

CVA Boom/arm/bucket seal (oil-seal) 45/920098 CVA

Bucket/arm oil seal fits: JCB 803 Super, 804 Super, 8014, 8015, 8016, 8017, 8018, 8025 ZTS, 8035 ZTS

View part

CVA Axle shaft 450/10209 CVA

Drive axle shaft rear fits: JCB 214, 215, 217, 3CX, 4CX, 5CX

View part

CVA Rear axle differential repair kit 450/11000 CVA

Rear axle tube repair kit fits: JCB 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC

View part

CVA Wheel hub cover 450/12401 CVA

Wheel hub cover fits: JCB 2CX, 3CX, 4CX, 530-110, 530-120, 535-60, 536-60, 541-70

View part

CVA Wheel hub sleeve 450/12703

Wheel hub tube fits: JCB

View part

CVA Automatic transmission friction plate 450/20401 CVA

Automatic transmission friction plate fits: JCB 530, 535, 535-140, 535-95, 536-70

View part

CVA Automatic transmission friction plate 450/20402 CVA

Automatic transmission friction plate fits: JCB 2CX, 2CXL, 2CXS, 2CXSL, 2CX-SMO, 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC, 5CX

View part

CVA Differential gear 450/20403 CVA

Differential gear fits: JCB 2, 3, 4, 400, 5, 500

View part

CVA Rear axle differential repair kit 450/20600 CVA

Rear axle tube repair kit fits: JCB 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC

View part

CVA Gearbox element 4505385 CVA

Gearbox element, friction plate fits: CATERPILLAR 422 E, 428 E, 428 F, 432 E, 432 F, 434 E, 434F, 442 E

View part

CVA Brake disc 451/01702 CVA

Brake disc (203mmx4,7mm) fits: JCB 2CX, 2CXL, 2CXS, 2CXSL, 2CX-SMO, 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC, 5CX, 530, 530 BHL-2, 530 BHL-4, 530-110, 530-2, 530-2 HL, 530-4

View part

CVA Brake disc 451/13302 CVA

Brake disc (200/225mm) fits: JCB 410, 415, 430

View part

CVA Brake disc 451/22702 CVA

Brake disc (200/225mm) fits: JCB 2CX, 2CXL, 2CXS, 2CXSL, 2CX-SMO, 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC, 5CX, 530, 530 BHL-2, 530 BHL-4, 530-110, 530-2, 530-2 HL, 530-4

View part

CVA Wheel reduction gear seal/gasket 453/08203 CVA

Wheel reduction gear seal/gasket fits: JCB 3CX, 4CX

View part

CVA Cross rod 453/23400 DB

Cross rod (L-240mm 25,29)

View part

CVA Tie rod end 453/23401 DB

Tie rod end L/R (M28x1,5mm, L-215mm) fits: JCB 526, 528, 530, 533, 535, 537, 540

View part

CVA Air filter 4535509 CVA

View part

CVA Door window 4544269 CVA

Door window front/top fits: CATERPILLAR 950GC, 966GC

View part

CVA Windscreen 4553948 CVA

Windscreen green (width: 836mm, height: 1595mm) fits: CATERPILLAR 300

View part

CVA Side window 455822

View part

CVA Brake disc 458/20281 CVA

Brake disc (164,5mmx3,8mm) fits: JCB 2CX, 2CXL, 2CXS, 2CXSL, 2CX-SMO, 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC, 406, 5CX

View part

CVA Brake disc 458/20285 CVA

Brake disc (222mmx3,7mm) fits: JCB 2CX, 2CXL, 2CXS, 2CXSL, 2CX-SMO, 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC, 5CX

View part

CVA Brake disc 458/20286 CVA

Brake disc fits: JCB 525-50

View part

CVA Brake disc 458/20289 CVA

Brake disc (225mm) fits: JCB 2CX, 2CXL, 2CXS, 2CXSL, 2CX-SMO, 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC, 409B, 5CX, 530, 530 BHL-2, 530 BHL-4, 530-110, 530-2, 530-2 HL, 530-4

View part

CVA Brake disc 458/20353 CVA

Brake disc (222mmx3,9mm) fits: JCB 2CX, 2CXL, 2CXS, 2CXSL, 2CX-SMO, 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC, 5CX

View part

CVA Crown wheel/driving pinion 458/20672 CVA

Crown and pinion fits: JCB 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC

View part

CVA Crown wheel/driving pinion 458/70023 CVA

Crown and pinion, number of shaft teeth: 8, number of wheel teeth: 35 fits: JCB 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC

View part

CVA Crown wheel/driving pinion 458/70037 CVA

Crown and pinion fits: JCB 3CX, 3CX COMPACT, 3CX ECO CAB, 3CX HM, 3CX HMT, 3CX SITEMASTER, 3CX SM, 3CX SMT, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CX ECO CAB, 4CX M, 4CX SM, 4CX SUPER, 4CXC

View part

CVA Crown wheel/driving pinion 458/70220 CVA

Crown and pinion, number of shaft teeth: 13, number of wheel teeth: 33 fits: JCB 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC

View part

CVA Crown wheel/driving pinion 458/70246 CVA

Crown and pinion fits: JCB 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC

View part

CVA Crown wheel/driving pinion 458/70249 CVA

Crown and pinion fits: JCB 3CX, 3CX COMPACT, 3CX ECO CAB, 3CX HM, 3CX HMT, 3CX SITEMASTER, 3CX SM, 3CX SMT, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CX ECO CAB, 4CX M, 4CX SM, 4CX SUPER, 4CXC, 530

View part

CVA Crown wheel/driving pinion 458/70260 CVA

Crown and pinion, (13/33), JCB 3CX, 3CX COMPACT, 3CX ECO CAB, 3CX HM, 3CX HMT, 3CX SITEMASTER, 3CX SM, 3CX SMT, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT

View part

CVA Differential element 458/M1647 CVA

Differential element (sleeve) fits: JCB 535, 540, 550

View part

CVA Crown wheel/driving pinion 458/M1762 CVA

Crown and pinion fits: JCB 526-56, 533-105, 535-95, 540-170

View part

CVA Rear window 4591979 CVA

View part

Buying with Partios

Buying CVA parts through Partios

Are these genuine CVA parts?

Yes. Every CVA line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source CVA parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for CVA lines that aren't currently available.

Do you supply CVA parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on CVA parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a CVA order?

It depends on the line. Stocked CVA items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for CVA parts?

No. There's no minimum order value or quantity on a Partios trade account. Some CVA lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account