Partios Wholesale catalogue

CVA Distributor | Parts

Door window (1,088) · Windscreen (872) · Side window (853) · Rear window (605) · Boom pin (289) · Bucket pin (151) · Boon sleeve (150) · Boom/arm/bucket seal (oil-seal) (148) · 239 further part types (1,793)

6,131 current catalogue lines

About the CVA range

CVA spans several vehicle systems in the Partios catalogue: 6,131 lines across 247 part types, with no single area dominating. The largest groups are door window (1,088), windscreen (872), side window (853), rear window (605) and boom pin (289). Beyond those, 2,091 lines are spread across 241 further part types. That tail includes boon sleeve, boom/arm/bucket seal (oil-seal) and stabilizers and elements. Buyers are typically workshops, motor factors and exporters; a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. With 6,131 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

CVA Boom pin 3209266 CVA

Arm pin (40x200mm) fits: CATERPILLAR TH336C, TH337C, TH406C, TH407C, TH414C, TH417C, TH514C

View part

CVA Door window 32116016 CVA

Door window fits: BOMAG BW177D-3, BW213DH-3

View part

CVA Side window 32153

View part

CVA Windscreen 3222989581

View part

CVA Boom pin 3224583 CVA

Arm pin (45x255mm) fits: CATERPILLAR 428 E, 432 E

View part

CVA Boom pin 3224584 CVA

Arm pin (45x290mm) fits: CATERPILLAR 428 E, 432 E

View part

CVA Boom pin 3224585 CVA

Arm pin (45x171mm) fits: CATERPILLAR 428 E, 432 E, 442 E

View part

CVA Boom pin 3224586 CVA

Arm pin (45x190mm) fits: CATERPILLAR 428 E, 432 E, 442 E

View part

CVA Boom pin 3224587 CVA

Arm pin (45x191mm) fits: CATERPILLAR 428 E, 432 E, 442 E

View part

CVA Boom pin 3224589 CVA

Arm pin (40x133mm) fits: CATERPILLAR 428 E, 432 E, 442 E

View part

CVA Boom/arm/bucket seal (oil-seal) 3240355 CVA

Bucket/arm oil seal fits: CATERPILLAR 422 E, 422 F, 422F2, 422F2 STLRC, 422S, 428, 428 B, 428 C, 428 D, 428 D NF, 428 E, 428 F, 428 F2, 428 II, 428F2 LRC, 432, 432 B, 432 C, 432 D, 432 E, 432 F

View part

CVA Boom/arm/bucket seal (oil-seal) 3240356 CVA

Bucket/arm oil seal fits: CATERPILLAR 416 F, 420 F, 428 E, 428 F, 430 F, 432 E, 432 F, 442 E

View part

CVA Boom/arm/bucket seal (oil-seal) 3240386 CVA

Bucket/arm oil seal fits: CATERPILLAR 422 E, 428 E, 428 F, 432 E, 432 F, 434 E, 434F, 442 E, 444 E, 444F

View part

CVA Hydraulic cylinder repair kit 3240398 CVA

Hydraulic actuator repair kit fits: CATERPILLAR 432 E, 432 F, 444F

View part

CVA Door window 324071A1 CVA

Door window side L fits: CASE IH 521D, 621 D

View part

CVA Multi-V-belt 3243408 CVA

View part

CVA Boon sleeve 3249501

Dipper ram sleeve fits: CATERPILLAR

View part

CVA Boom pin 3252009 CVA

Arm pin (60x1065mm) fits: CATERPILLAR 428 E, 432 E, 442 E

View part

CVA Side window 3259300 CVA

Side window top/behind the door L (hardened, height: 983mm, width:821mm) fits: CATERPILLAR 400

View part

CVA Side window 3259301 CVA

Side window top/behind the door R (hardened, height: 983mm, width:821mm) fits: CATERPILLAR 400

View part

CVA Boom pin 3260088 CVA

Arm pin (45x133mm) fits: CATERPILLAR 428 E, 432 E, 442 E

View part

CVA Boom pin 3260089 CVA

Arm pin (55x260mm) fits: CATERPILLAR 422 E, 428 E, 428 F, 428 F2, 432 E, 432 F, 432 F2, 434 E, 434F, 444F

View part

CVA Boom pin 3260093 CVA

Arm pin (45x254mm) fits: CATERPILLAR 428 E, 432 E, 442 E

View part

CVA Fuel filter 3261644 L

View part

CVA Bucket sleeve 3263362 CVA

Bucket sleeve 68mmx55mmx90mm fits: CATERPILLAR 416 E, 416 F, 420 F, 420E, 422 E, 428 E, 432 E, 434 E

View part

CVA Hydraulic piston pump 3264635-CAT

View part

CVA TUZ other suspension elements 3264689

TUZ other suspension elements fits: CATERPILLAR

View part

CVA Air filter 3264690 CVA

View part

CVA Injector 3264700 CVA

Injector fits: CATERPILLAR 320D, 420E, AP600D, BG600D, BG655D, CP44, D3K, 14 G

View part

CVA Cabin filter 3276618 CVA

Cabin filter 58x189,5x278, panel fits: CATERPILLAR 314E, 321DLCR, 323DL, 329D, 329D2, 329F, 336D2, 336DL, 345D, 6015B, M314F, M315F, M316F, M317F, M318F, M320F, M322F, M323F, MH3022, MH3024

View part

CVA Bucket pin 3285234 CVA

Bucket pin (55x223mm) fits: CATERPILLAR 422 E, 428 E, 428 F, 432 E, 432 F, 434 E, 434F, 442 E, 444 E, 444F

View part

CVA Stabilizers and elements 3291331 CVA

Stabilizers and elements, ball joint fits: CATERPILLAR 422 E, 428 E, 428 F2, 432 E, 432 F2, 434 E, 434F, 444 E, 444F

View part

CVA Oil sump gasket 329946 CVA

View part

CVA Door window 32B-54-R3430 CVA

Door window side L fits: KOMATSU WB 93R-8, WB 93S-8, WB 97R-8, WB 97S-8

View part

CVA Door window 32B-54-R3630 CVA

Door window side R fits: KOMATSU WB 93R-8, WB 93S-8, WB 97R-8, WB 97S-8

View part

CVA Side window 32B-54-R3810 CVA

Side window behind the door L (hardened, height: 1217mm, width:801mm) fits: KOMATSU WB 01.19-

View part

CVA Side window 32B-54-R5120 CVA

Side window behind the door R (hardened, height: 1100mm, width:802mm) fits: KOMATSU WB 01.19-

View part

CVA Rear window 32B-54-R5220 CVA

View part

CVA Door handle 3300427 CVA

Door handle inside/outside L fits: CATERPILLAR 416 E, 416 F, 420 F, 420E, 422 E, 428 E, 428 F, 430 E, 430 F, 432 E, 432 F, 434 E, 434F, 442 E, 444 E, 444F, 450 E

View part

CVA Door window 3308257 CVA

Door window rear/top fits: CATERPILLAR TH255

View part

CVA Side window 3309059 CVA

Side window side/behind the door (hardened, height: 930mm, width:370mm) fits: CATERPILLAR TH

View part

CVA Boom pin 3309673 CVA

Arm pin

View part

CVA Boom pin 3309680 CVA

Arm pin (45x194mm) fits: VOLVO BL60, BL60B, BL61, BL61 PLUS, BL61B, BL70, BL70B, BL71, BL71 PLUS, BL71B

View part

CVA Bucket pin 3309682 CVA

Bucket pin (50x197mm) fits: CATERPILLAR 434 E, 444 E

View part

CVA Boom pin 3309683 CVA

Arm pin (45x260mm) fits: CATERPILLAR 434 E, 444 E

View part

CVA Boom pin 3309684 CVA

Arm pin (55x251mm) fits: CATERPILLAR 434 E, 444 E

View part

CVA Fuel filler cap 331/11403 CVA

Fuel filler cap (with the key) fits: JCB 2CX, 2CX-SMO, 2CXL, 2CXS, 2CXSL, 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC, 535-95, 540-140, 540-170

View part

CVA Accelerator cable 331/14325 CVA

Accelerator cable (1900mm) fits: JCB 520 S, 520-55, 530, 540

View part

Buying with Partios

Buying CVA parts through Partios

Are these genuine CVA parts?

Yes. Every CVA line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source CVA parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for CVA lines that aren't currently available.

Do you supply CVA parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on CVA parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a CVA order?

It depends on the line. Stocked CVA items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for CVA parts?

No. There's no minimum order value or quantity on a Partios trade account. Some CVA lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account