Partios Wholesale catalogue

CVA Distributor | Parts

Door window (1,088) · Windscreen (872) · Side window (853) · Rear window (605) · Boom pin (289) · Bucket pin (151) · Boon sleeve (150) · Boom/arm/bucket seal (oil-seal) (148) · 239 further part types (1,793)

6,131 current catalogue lines

About the CVA range

CVA spans several vehicle systems in the Partios catalogue: 6,131 lines across 247 part types, with no single area dominating. The largest groups are door window (1,088), windscreen (872), side window (853), rear window (605) and boom pin (289). Beyond those, 2,091 lines are spread across 241 further part types. That tail includes boon sleeve, boom/arm/bucket seal (oil-seal) and stabilizers and elements. Buyers are typically workshops, motor factors and exporters; a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. With 6,131 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

CVA Stabilizers and elements 1883064 CVA

Stabilizers and elements fits: CATERPILLAR 312D2, 312D2 GC, 312D2 L, 312E, 312E CR, 312EL, 312F, 312L, 313, 313 GC, 313B, 313B CR, 313C, 313D, 313D2, 313D2 L, 313D2 LGP, 313FL, 313M Serie C, 314C

View part

CVA Boom pin 1883352 CVA

Arm pin (80x187mm) fits: CATERPILLAR M318C, M318D, M320, M320D2, M320F, M322D2MH, MH3022, MH3024

View part

CVA Boom pin 1883917 CVA

Arm pin

View part

CVA Side window 1892671 CVA

Side window R (hardened, height: 1340mm, width:1320mm) fits: CATERPILLAR 300

View part

CVA Bucket pin 1893922 CVA

View part

CVA Bucket pin 1894148 CVA

View part

CVA Exhaust system muffler 190-5781 CVA

Exhaust system muffler fits: CATERPILLAR 306, 307C, 307D, 308C, 308D

View part

CVA Windscreen 190034A5

View part

CVA Rear window 1903362 CVA

View part

CVA Oil sump gasket 1906114 CVA

Oil sump gasket fits: CATERPILLAR 627, 627G, 627H, 627K, 637, 637G, 637K, 814F II, 815F II, 816F II, 966K, 966K XE, 966L, 966M, 966M XE, 972K, 972L, 972M, 972M XE

View part

CVA Multi-V-belt 1908143 CVA

View part

CVA Boom/arm/bucket seal (oil-seal) 1915619 W

Bucket/arm oil seal set fits: CATERPILLAR 320, 320 GC, 320-A, 320-A L, 320-A-N, 320B, 320BL, 320BLN, 320BLU, 320BN, 320BS, 320BU, 320C, 320C LRR, 320CL, 320CLN, 320CLU, 320CS, 320CU, 320D, 320D FM

View part

CVA Boom pin 1919588 CVA

Arm pin

View part

CVA Stabilizer slip 1931681 CVA

Stabilizer slip 5,2mm fits: CATERPILLAR 414 E, 415F2 ST, 416, 416 B, 416 C, 416 D, 416 E, 416 EST, 416 F, 416 FST, 416 II, 416F2 ST, 416F2 STLRC, 420 D, 420 EST, 420 F, 420 FIT, 420 FST, 420 XE

View part

CVA Stabilizer slip 1931682 CVA

Stabilizer slip 7,2/14,8 x 100,5/39,2mm fits: CATERPILLAR 428 C, 438 C

View part

CVA Stabilizer slip 1931683 CVA

Stabilizer slip 100,5/39,2mm x 4,2/11,6mm fits: CATERPILLAR 422 E, 422F2, 424 D, 426, 426F2, 427F2, 428, 428 C, 428 D, 428 E, 428 F, 428 F2, 432 D, 432 F, 434 E, 434F, 438 C, 438 D, 442 D, 442 E

View part

CVA Stabilizer slip 1931684 CVA

Stabilizer slip 40,2/101mm x 6,3/12,6mm fits: CATERPILLAR 422 E, 422 F, 422F2, 424 D, 426, 426F2, 427F2, 428 C, 428 D, 428 E, 428 F, 428 F2, 432 D, 432 E, 432 F, 432 F2, 434 E, 434F, 438 C, 438 D

View part

CVA Stabilizer slip 1931685 CVA

Stabilizer slip 15x49x91mm fits: CATERPILLAR 424 D, 428 C, 428 D, 432 D, 438 C, 438 D, 442 D

View part

CVA Stabilizer slip 1931686 CVA

Stabilizer slip 13x49x91mm fits: CATERPILLAR 428 B, 428 C, 438 B, 438 C

View part

CVA Stabilizer slip 1931687 CVA

Stabilizer slip 17x50x90,5mm fits: CATERPILLAR 428 B, 428 C, 428 D, 432 D, 438 C, 438 D, 442 D

View part

CVA Stabilizer slip 1931688 CVA

Stabilizer slip 14x50x90,5mm fits: CATERPILLAR 424 D, 428 C, 428 D, 432 D, 438 D, 442 D

View part

CVA Stabilizer slip 1931689 CVA

Stabilizer slip 16mm fits: CATERPILLAR 424 D, 428 C, 428 D, 432 D, 438 C, 438 D, 442 D

View part

CVA Drive shaft cross-piece 1934640 CVA

Drive shaft cross-piece fits: CATERPILLAR 924F, 924G, 924GZ, 924H, 924HZ, 926M, 928G, 928H, 930G, 930H, 938H, 938K, 24F, 28G, 38H

View part

CVA Button switch-key 1943592 CVA

Switch, indicators, lights control, windscreen wipers control fits: CATERPILLAR M313C, M315C, M318C, M322C, M325C

View part

CVA Air-conditioning compressor control valve 1945622

View part

CVA Windscreen 194638S CVA

Windscreen colourless (width: 570mm, height: 983mm) fits: MANITOU BT, BTI

View part

CVA Stabilizers and elements 1950103 CVA

Stabilizers and elements fits: CATERPILLAR 311C, 312C, 312CL, 314C

View part

CVA Door window 1961437 CVA

Door window bottom fits: CATERPILLAR 308C CR, 308D CR, 314C CR, 314C LCR, 314D CR, 314E LCR, 315F LCR, 321DLCR, 328DLCR

View part

CVA Side window 1961466 CVA

Side window bottom/front (hardened, height: 442mm, width:687mm) fits: CATERPILLAR 300

View part

CVA Side window 1961467 CVA

Side window side R (hardened, height: 1380mm, width:1150mm) fits: CATERPILLAR 300

View part

CVA Side window 1961469 CVA

Side window side/behind the door (hardened, height: 758mm, width:384mm) fits: CATERPILLAR 300

View part

CVA Windscreen 1961495 CVA

Windscreen green (width: 680mm, height: 870mm) fits: CATERPILLAR 300

View part

CVA Gas spring 1969720 CVA

Gas spring fits: CATERPILLAR M M313C/M313D/M314F/M315/M315C/M315D/M316/M316C/M316D/M317D2/M318C/M318D/M322C/M322D

View part

CVA Gas spring 1975681 CVA

View part

CVA Wheel bearing fitting elements 1976439 CVA

Bearing mounting parts fits: CATERPILLAR D5M, D5N, D6K, D6K LGP, D6K XL

View part

CVA Stabilizers and elements 1976440 CVA

Stabilizers and elements, bearing fits: CATERPILLAR D6M, D6N

View part

CVA Boon sleeve 1977786 CVA

Dipper ram sleeve 90/106x57 fits: CATERPILLAR M M315C/M315D/M316C/M316D/M316F/M317D2/M318F/M323F

View part

CVA Bucket pin 1980868 CVA

Bucket pin fits: CATERPILLAR M313C, M313D, M315C, M316C

View part

CVA Rear window 198387 CVA

View part

CVA Knuckle bearing 1987823 MR

Knuckle bearing fits: LANDINI 10000, 12500, 13000, 14500, 16000, 16500, 17500, 19000, 7860 HC, 8860 HC, 8880 HC, 9060, 9080 HC, 9880 HC MASSEY FERGUSON 130, 150, 180, 220, 240, 245, 260

View part

CVA Steering knuckle seal 1987825 CVA

Steering knuckle seal (62x78/81x13,8) fits: CATERPILLAR 422 E, 422 F, 424 D, 428 D, 428 E, 428 F, 432 D, 432 E, 434 E, 434F, 442 D, 442 E, 444 E, 444F, TH103, TH220B, TH330B, TH340B, TH350B

View part

CVA Differential element 1987826 CVA

Differential element fits: CATERPILLAR 442 E

View part

CVA Steering knuckle pivot 1987838 CVA

Steering pivot (35/62/82x110mm) fits: CATERPILLAR 414 E, 420 D, 420E, 422 E, 424 D, 428 B, 428 D, 428 E, 432 D, 442 E, 444 E

View part

CVA Drive axle seal/leak stopper 1990697 CVA

Drive axle seal/leak stopper (65x105x14)

View part

CVA Door window 1995989 CVA

Door window bottom fits: CATERPILLAR 301.5, 301.6, 301.8, 302.5, 303.5, 304.5

View part

CVA Door window 1995990 CVA

Door window top fits: CATERPILLAR 301.5, 301.6, 301.8, 302.5, 303.5, 304.5

View part

CVA Door window 1995991 CVA

Door window bottom fits: CATERPILLAR 301.5, 301.6, 301.8, 302.5, 303.5, 304.5

View part

CVA Boom/arm/bucket seal (oil-seal) 1997416 W

Bucket/arm oil seal

View part

Buying with Partios

Buying CVA parts through Partios

Are these genuine CVA parts?

Yes. Every CVA line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source CVA parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for CVA lines that aren't currently available.

Do you supply CVA parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on CVA parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a CVA order?

It depends on the line. Stocked CVA items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for CVA parts?

No. There's no minimum order value or quantity on a Partios trade account. Some CVA lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account