Partios Wholesale catalogue

CVA Distributor | Parts

Door window (1,088) · Windscreen (872) · Side window (853) · Rear window (605) · Boom pin (289) · Bucket pin (151) · Boon sleeve (150) · Boom/arm/bucket seal (oil-seal) (148) · 239 further part types (1,793)

6,131 current catalogue lines

About the CVA range

CVA spans several vehicle systems in the Partios catalogue: 6,131 lines across 247 part types, with no single area dominating. The largest groups are door window (1,088), windscreen (872), side window (853), rear window (605) and boom pin (289). Beyond those, 2,091 lines are spread across 241 further part types. That tail includes boon sleeve, boom/arm/bucket seal (oil-seal) and stabilizers and elements. Buyers are typically workshops, motor factors and exporters; a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. With 6,131 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

CVA Boom pin 1590960 CVA

Arm pin (65x120mm) fits: CATERPILLAR 426, 428, 436, 438

View part

CVA Boom pin 1590961 CVA

Arm pin (55x363mm) fits: CATERPILLAR 416 C, 416 D, 420 D, 424 D, 428 C, 428 D, 432 D, 438 C, 438 D, 442 D

View part

CVA Coolant temperature sensor 1591752 CVA

Coolant temperature sensor fits: CATERPILLAR 216, 226, 228, 232, 236, 242, 246, 247, 248, 252, 257, 262, 267, 277, 287, 906

View part

CVA Gas spring 1594269 CVA

Gas spring (L max-500mm, 350N) fits: CATERPILLAR 414 E, 416 C, 416 D, 416 E, 416 F, 420 D, 420 F, 420E, 422 E, 424 D, 426 C, 428 C, 428 D, 428 E, 428 F, 430 D, 430 E, 430 F, 432 D, 432 E, 432 F

View part

CVA Crankshaft oil seal 1597782 CVA

Crankshaft oil seal (90,5x101/101x4,9) fits: CATERPILLAR 311B, 311C, 311D, 311F, 312B, 312C, 312D, 312E

View part

CVA Stabilizer slip 160/00991 CVA

Stabilizer slip fits: JCB 527-58, 530, 531-70, 532, 533-105, 535-140, 535-95, 536-60, 537, 540, 540-140, 541-70, 550-140

View part

CVA Arm slide 160/00992 CVA

Arm slide 150x60x22,3 fits: JCB 531-70, 540, 550-140

View part

CVA Expansion tank cap 160/01980 CVA

Coolant equalization tank plug (1bar) fits: JCB 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC

View part

CVA Stabilizers and elements 1600305 CVA

View part

CVA Boom pin 1612114 CVA

Arm pin (60x288mm) fits: CATERPILLAR D5M, D5N, D6K, D6K LGP, D6K XL

View part

CVA GP relay 1613128 KS

GP relay fits: CATERPILLAR 5090B, 924G, 928G, 938G, CP573E, CP663E, CS563E, CS573E, CS583E, CS663E, CS683E, 28G, M325C

View part

CVA Hydraulic piston pump 1616634 CVA

View part

CVA Stabilizers and elements 1617145 CVA

O-ring, oil seal fits: CATERPILLAR 420 F, 422 E, 428 E, 428 F, 430 F, 432 E, 432 F, 434 E, 434F, 442 E, 444 E, 444F

View part

CVA Rear window 1618042

View part

CVA Door window 162-2190

View part

CVA Door window 1622189

View part

CVA Distributor spare parts and accessories 1622302 CVA

Button cover fits: CATERPILLAR 301.5, 301.6, 301.8, 302.5, 303.5, 304.5, 307, 307B, 312C, 933C, 939C, M312, M315, M318, M320

View part

CVA Handbrake cable 1630755 R

Handbrake cable (1020mm) fits: CATERPILLAR 420 D, 424 D, 426 C, 428 C, 428 D, 430 D, 432 D, 436 C, 438 C, 438 D, 442 D, 446 D

View part

CVA Seat elements 1631135 CVA

Seat element

View part

CVA Valve stem gasket/seal 1632478

View part

CVA Thermostat housing 1635591 CVA

View part

CVA Windscreen 1640799

View part

CVA Door window 1641059

View part

CVA Side window 1641064 CVA

Side window side/behind the door R (hardened, height: 1403mm, width:590mm) fits: CATERPILLAR 400

View part

CVA Side window 1641065 CVA

Side window side/behind the door L (hardened, height: 1403mm, width:590mm) fits: CATERPILLAR 400

View part

CVA Door window 1641066 HS

Door window top L/R fits: CATERPILLAR 416 D, 424 D, 428 D, 432 D, 438 D, 442 D, 446 D

View part

CVA Rear window 1641068N CVA

View part

CVA Rear window 1641069 CVA

View part

CVA Windscreen 1641070 CVA

Windscreen green (width: 1585mm, height: 972mm) fits: CATERPILLAR 400

View part

CVA Windscreen 1641072

View part

CVA Accelerator cable 1641079 CVA

Accelerator cable (1576mm) fits: CATERPILLAR 424 B, 424 D, 428 D, 430 D, 432 D, 438 D, 442 D, 446 D

View part

CVA Excavator arm elements 1641182.N CVA

Excavator arm elements (Wire rope) fits: CATERPILLAR 424 D, 428 D, 432 D, 438 D, 442 D

View part

CVA Rear window 1641303 CVA

View part

CVA Gas spring 1641328 P

Gas spring (8mm/8mm, L max-287mm, 500N) fits: CATERPILLAR 420 D, 420 F, 420E, 422 E, 424 D, 428 D, 428 E, 430 D, 430 E, 430 F, 432 D, 432 E, 434 E, 438 D, 442 D, 442 E, 444 E, 446 D, 450 E, 450 F

View part

CVA Tie rod end 1642657 DB

Tie rod end fits: CATERPILLAR M312, M315, M315C, M316C, M318, M318C

View part

CVA Tie rod end 1642658 CVA

Tie rod end R fits: CATERPILLAR M312, M313C, M315, M315C, M316C, M318, M318C

View part

CVA Drive shaft cross piece 1651032 CVA

Drive shaft cross fits: VOLVO A20, A25, A25B, A30, A30C, A35C, L120C, L150, L150C, L180, L180C, L180D

View part

CVA Switch-keys (other) 1654754 CVA

Switch

View part

CVA Boom pin 1655245 CVA

Arm pin (30x193mm) fits: CATERPILLAR 301.4C, 301.5, 301.6, 301.6C, 301.7D, 301.8, 301.8C

View part

CVA Bucket pin 1655255 CVA

Bucket pin (70x194mm) fits: CATERPILLAR M318

View part

CVA Axle brackets washer 1658996 CVA

Axle brackets washer (inner diameter: 55,5mm/outer diameter: 100mm, thickness: 4,9mm) fits: CATERPILLAR 414 E, 416 B, 416 C, 416 D, 416 E, 416 F, 420 D, 420 F, 420E, 422 E, 424 B, 424 D, 426 B, 426 C

View part

CVA Stabilizers and elements 1661487 CVA

Spacer washer

View part

CVA Crankshaft oil seal 1661494 CVA

Crankshaft oil seal (79,9x95,1x8) fits: CATERPILLAR 545D, 555D, M315, M316, M318, MH3022, MH3024

View part

CVA Door window 1661911 CVA

Door window front/top fits: CATERPILLAR TH62, TH63

View part

CVA Hydraulic pump flange 1662142

Hydraulic pump flange fits: CATERPILLAR

View part

CVA Boom pin 1663576 CVA

Arm pin (60x150mm) fits: CATERPILLAR M312

View part

CVA Windscreen 1667630

View part

CVA Stabilizers and elements 1667870 CVA

Stabilizers and elements fits: CATERPILLAR 421, 422 E, 422 F, 422F2 STLRC, 422S, 424 B, 424 B2, 424 D, 426, 428, 428 B, 428 C, 428 D, 428 D NF, 428 E, 428 F, 428 F2, 428 II, 428F2 LRC, 430 D, 430 E

View part

Buying with Partios

Buying CVA parts through Partios

Are these genuine CVA parts?

Yes. Every CVA line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source CVA parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for CVA lines that aren't currently available.

Do you supply CVA parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on CVA parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a CVA order?

It depends on the line. Stocked CVA items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for CVA parts?

No. There's no minimum order value or quantity on a Partios trade account. Some CVA lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account