Partios Wholesale catalogue

CVA Distributor | Parts

Door window (1,088) · Windscreen (872) · Side window (853) · Rear window (605) · Boom pin (289) · Bucket pin (151) · Boon sleeve (150) · Boom/arm/bucket seal (oil-seal) (148) · 239 further part types (1,793)

6,127 current catalogue lines

About the CVA range

CVA spans several vehicle systems in the Partios catalogue: 6,127 lines across 247 part types, with no single area dominating. The largest groups are door window (1,088), windscreen (872), side window (853), rear window (605) and boom pin (289). Beyond those, 2,091 lines are spread across 241 further part types. That tail includes boon sleeve, boom/arm/bucket seal (oil-seal) and stabilizers and elements. Buyers are typically workshops, motor factors and exporters; a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. With 6,127 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

CVA Clutch sub disc 1324266 CVA

Clutch sub disc fits: CATERPILLAR M312, M313C, M313D, M315, M315C, M315D, M315D2, M316D, M317D2, M318, M318C, M318D, M320, M322D

View part

CVA Gearbox element 1324268 CVA

Gearbox element, friction plate fits: CATERPILLAR M312, M313C, M313D, M314F, M315, M315D, M315D2, M315F, M316C, M316D, M316F, M317D2, M317F, M318, M318C, M318D, M318F, M320, M320F, M322C, M322D

View part

CVA Clutch sub disc 1324282 CVA

Clutch sub disc fits: CATERPILLAR M312, M313C

View part

CVA Clutch disc 1324285 CVA

Clutch disc/plate fits: CATERPILLAR M312, M313C

View part

CVA Loader bucket and elements 1324720

Bar and elements

View part

CVA Side window 1325097 CVA

Side window side/behind the door (hardened, height: 1090mm, width:284mm) fits: CATERPILLAR 300

View part

CVA Rear window 1325098 CVA

View part

CVA Boom pin 1326496 CVA

Arm pin (40x157mm) fits: CATERPILLAR 414 E, 416 B, 416 C, 416 D, 416 E, 420 D, 420E, 422 E, 424 B, 424 D, 426 B, 426 C, 428 B, 428 C, 428 D, 430 D, 430 E, 436 C, 438 C

View part

CVA Door window 1329450 CVA

Door window bottom fits: CATERPILLAR 312B, 315BL, 317B, 318B, 320B, 322B, 325B, 330B, 345B, 365B, 375B, 385B

View part

CVA Sealing ring 1334292

View part

CVA Brake disc 1337234 CVA

Brake disc (203mmx4,8mm) fits: CATERPILLAR 416 B, 424 D, 428 B, 428 C, 428 D, 432 D, 436 C, 438 B, 442 D

View part

CVA Loader bucket and elements 1342733 CVA

Bar and elements, Bearing fits: CATERPILLAR D6M, D6N

View part

CVA Loader bucket and elements 1359390 CVA

Bar and elements, Tooth fits: CATERPILLAR 302.2D, 302.4D, 302.5, 302.5C, 302.7 CR, 302.7D, 303, 303.5, 303.5C, 303.5D, 303.5E, 303.5E2, 303E CR, 304, 304E, 304E2

View part

CVA Boom pin 1361711 CVA

Arm pin (51x195mm) fits: CATERPILLAR 950G, 962G, 962H, 966G, 972G

View part

CVA Wheel bearing 1362940 CVA

View part

CVA Input shaft bearing 1367808 CVA

Input shaft bearing (40/90x25,5mm) fits: CATERPILLAR 428 D, 428 E, 428 F, 430 D, 430 E, 430 F, 432 D, 432 E, 432 F, 442 D, 442 E

View part

CVA Boom pin 1369380 CVA

Arm pin (90x290mm) fits: CATERPILLAR 950G, 962G, 962H

View part

CVA Nut 1370/0303D

Nut fits: JCB

View part

CVA Side window 138-0252

View part

CVA Side window 138-0260

View part

CVA Windscreen 1380263

View part

CVA Windscreen 1380264 N

View part

CVA Boom pin 1382160 CVA

Arm pin

View part

CVA Stabilizers and elements 1382177 CVA

Stabilizers and elements fits: CATERPILLAR 902, 906, 908

View part

CVA Boom pin 1382476 CVA

Arm pin (50,5x227mm) fits: CATERPILLAR 902, 906

View part

CVA Fuel filter 1383098 CVA

View part

CVA Drive shaft 1384560N CVA

Drive shaft fits: CATERPILLAR 416 C, 416 D, 420 D, 424 D, 426 C, 428 C, 428 D, 430 D, 432 D, 436 C, 438 C, 438 D, 442 D

View part

CVA Loader bucket and elements 1386410N

Bar and elements

View part

CVA Boom pin 1386685 CVA

Arm pin

View part

CVA Drive shaft fitting elements 1388526 CVA

Drive shaft fitting element (Housing) fits: CATERPILLAR 416 C, 416 D, 420 D, 424 D, 426 C, 428 C, 428 D, 430 D, 432 D, 436 C, 438 C, 438 D, 442 D

View part

CVA Drive shaft cross-piece 1388527 CVA

Drive shaft cross-piece (28,5x72,5mm) fits: CATERPILLAR 416 C, 416 D, 420 D, 424 D, 426 C, 428 C, 428 D, 430 D, 432 D, 436 C JOHN DEERE 620, 6010, 6020, 6110, 6120, 6210, 6220, 6310, 6320, 6410

View part

CVA Axle shaft 1388528 CVA

Drive axle shaft fits: CATERPILLAR 416 C, 416 D, 420 D, 424 D, 426 C, 428 C, 428 D, 430 D, 432 D, 436 C, 438 C, 438 D, 442 D

View part

CVA Stabilizers and elements 1388530 CVA

Stabilizers and elements fits: CATERPILLAR 416 C, 416 D, 420 D, 424 D, 426 C, 428 C, 428 D, 430 D, 432 D, 436 C, 438 C, 438 D, 442 D

View part

CVA Axle shaft 1388532 CVA

Drive axle shaft

View part

CVA Boon sleeve 1394247 CVA

Dipper ram sleeve 35/45x50 fits: CATERPILLAR 300 301.5/301.8

View part

CVA Boom pin 1394249 CVA

Arm pin (35x235mm) fits: CATERPILLAR 301.5, 301.6, 301.8

View part

CVA Boom pin 1394250 CVA

Arm pin (35x171mm) fits: CATERPILLAR 301.5, 301.6, 301.8

View part

CVA Bucket pin 1394270 CVA

Bucket pin (30x175mm) fits: CATERPILLAR 301.5, 301.6, 301.8

View part

CVA Stabilizers and elements 1394277 CVA

Stabilizers and elements fits: CATERPILLAR 301.5, 301.6, 301.8

View part

CVA Stabilizers and elements 1394499 CVA

Stabilizers and elements, actuator sleeve fits: CATERPILLAR 301.5, 301.6, 301.8

View part

CVA Bucket sleeve 1394520 CVA

Bucket sleeve 40,1mmx30,2mmx29,1mm fits: CATERPILLAR 301.5, 301.6, 301.8

View part

CVA Boom pin 1394522 CVA

Arm pin (45x102mm) fits: CATERPILLAR 301.5, 301.6, 301.8

View part

CVA Air filter 1394834 LM

View part

CVA Boom pin 1394840 CVA

Arm pin

View part

CVA Stabilizers and elements 1396363 CVA

Stabilizers and elements fits: CATERPILLAR 301.5, 301.6, 301.6C, 301.8, 301.8C

View part

CVA Camshaft oil seal 1396364 CVA

Camshaft oil seal fits: CATERPILLAR 301.5, 301.6, 301.6C, 301.8, 301.8C, 302.5

View part

CVA Stabilizers and elements 1405166 CVA

Stabilizers and elements fits: CATERPILLAR 302.5, 304.5, 305, 306

View part

CVA Stabilizers and elements 1405169 CVA

Stabilizers and elements fits: CATERPILLAR 302.4D, 302.5, 302.7D, 303.5C, 303.5D, 303.5E, 303C CR, 304, 304C CR, 304D CR, 304E, 305, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 306, 306E

View part

Buying with Partios

Buying CVA parts through Partios

Are these genuine CVA parts?

Yes. Every CVA line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source CVA parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for CVA lines that aren't currently available.

Do you supply CVA parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on CVA parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a CVA order?

It depends on the line. Stocked CVA items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for CVA parts?

No. There's no minimum order value or quantity on a Partios trade account. Some CVA lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account