Partios Wholesale catalogue

CTR Distributor | Suspension & Steering

Tie rod end (1,020) · Stabilizer link (954) · Wheel suspension track control arm, front (883) · Tie rod (with no end) (800) · Front ball joint (470) · Stabilizer bar bushing (290) · Front track control arm silent block (209) · Wheel suspension track control arm, rear (200) · 27 further part types (498)

6,258 current catalogue lines

About the CTR range

CTR covers suspension & steering at Partios. It has 6,258 lines across 35 part types, rather than depth in a single one. The largest groups are tie rod end (1,020), stabilizer link (954), wheel suspension track control arm, front (883), tie rod (with no end) (800) and front ball joint (470). Beyond those, 907 lines are spread across 29 further part types. That tail includes front track control arm silent block, wheel suspension track control arm, rear and rear wishbone silent block. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 6,258 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

CTR Tie rod (with no end) CR0287

Tie rod (with no end) L/R (length: 170,8/210,8mm) fits: KIA OPTIMA 1.7D/2.0/2.4 01.11-12.15

View part

CTR Tie rod (with no end) CR0288

Tie rod (with no end) L/R (length: 207,2/247,2mm) fits: HYUNDAI I40 I, I40 I CW 1.6/1.7D/2.0 07.11-05.19

View part

CTR Tie rod (with no end) CR0289

Tie rod (with no end) L/R (length: 200/237,8mm) fits: HYUNDAI I20 I, I20 II 1.1D-1.6D 08.08-08.20

View part

CTR Tie rod (with no end) CR0290

Tie rod (with no end) L/R (length: 275/312,5mm) fits: HYUNDAI I10 I 1.0-1.2LPG 12.07-12.13

View part

CTR Tie rod (with no end) CR0291

Tie rod (with no end) L/R (length: 270/311mm) fits: HYUNDAI H-1, H-1 / STAREX, H100, PONY, PONY / EXCEL 1.3-2.6D 10.85-12.07

View part

CTR Tie rod (with no end) CR0292

Tie rod (with no end) L/R (length: 210/250mm) fits: HYUNDAI GRANDEUR, I40 I, I40 I CW, SONATA VII KIA OPTIMA 1.6-3.0 07.11-

View part

CTR Tie rod (with no end) CR0293

Tie rod (with no end) L/R (length: 245/285mm) fits: HYUNDAI GENESIS 3.0/3.8/5.0 06.14-07.17

View part

CTR Tie rod (with no end) CR0294

Tie rod (with no end) L/R (length: 190/230mm) fits: HYUNDAI GENESIS 3.0/3.8/5.0 06.14-07.17

View part

CTR Tie rod (with no end) CR0295

Tie rod (with no end) L/R (length: 210/254mm) fits: HYUNDAI IX35, TUCSON KIA SPORTAGE IV, SPORTAGE V 1.6-2.4 11.13-

View part

CTR Tie rod (with no end) CR0296L

Tie rod (with no end) L (length: 255/298mm) fits: HYUNDAI H-1 CARGO 2.5D 02.08-

View part

CTR Tie rod (with no end) CR0296R

Tie rod (with no end) R (length: 255/298mm) fits: HYUNDAI H-1 CARGO 2.5D 02.08-

View part

CTR Tie rod (with no end) CR0297

Tie rod (with no end) L/R (length: 220/264mm) fits: HYUNDAI IX35, NEXO, TUCSON KIA SPORTAGE IV 1.6-Electric 11.13-

View part

CTR Tie rod (with no end) CR0298

Tie rod (with no end) L/R (length: 284,3mm) fits: HYUNDAI ELANTRA VI, I30, IONIQ, IONIQ 5, KONA KIA CEED, CERATO IV, NIRO, NIRO I, NIRO II, PROCEED, XCEED 1.0-Electric 10.15-

View part

CTR Tie rod (with no end) CR0299

Tie rod (with no end) L/R (length: 255/292,8mm) fits: HYUNDAI H-1, H-1 / STAREX 2.4/2.5D 02.98-12.07

View part

CTR Tie rod (with no end) CR0300

Tie rod (with no end) L/R (length: 270/316mm)

View part

CTR Tie rod (with no end) CR0301

Tie rod (with no end) L/R (length: 195/231,8mm)

View part

CTR Tie rod (with no end) CR0302

Tie rod (with no end) L/R (length: 195/233,5mm)

View part

CTR Tie rod (with no end) CR0303

Tie rod (with no end) L/R (length: 195/231,8mm)

View part

CTR Tie rod (with no end) CR0304

Tie rod (with no end) L/R (length: 195/233,5mm)

View part

CTR Tie rod (with no end) CR0306

Tie rod (with no end) L/R (length: 165/208,5mm) fits: HYUNDAI GRANDEUR, SONATA VI KIA CADENZA I, OPTIMA 2.0-3.5 06.09-12.17

View part

CTR Tie rod (with no end) CR0307

Tie rod (with no end) L/R (length: 290/326,8mm) fits: HYUNDAI I10 II, I10 III 1.0/1.0LPG/1.2 08.13-

View part

CTR Tie rod (with no end) CR0308

Tie rod (with no end) L/R (length: 280/314,6mm)

View part

CTR Tie rod (with no end) CR0309L

Tie rod (with no end) L (length: 265/301mm)

View part

CTR Tie rod (with no end) CR0309R

Tie rod (with no end) R (length: 235/271mm)

View part

CTR Tie rod (with no end) CR0310

Tie rod (with no end) L/R (length: 160/198,5mm) fits: FORD ECONOVAN KIA BESTA MAZDA E 1.4/2.0/2.2D 01.84-07.04

View part

CTR Tie rod (with no end) CR0311

Tie rod (with no end) L/R (length: 245/281mm) fits: KIA PRIDE 1.1/1.3 01.90-09.01

View part

CTR Tie rod (with no end) CR0312

Tie rod (with no end) L/R (length: 260/296mm)

View part

CTR Tie rod (with no end) CR0316

Tie rod (with no end) L/R (length: 265/299,6mm) fits: KIA CLARUS, SEPHIA, SHUMA, SHUMA I 1.5-2.0 09.93-11.01

View part

CTR Tie rod (with no end) CR0317

Tie rod (with no end) L/R (length: 255/293,5mm) fits: KIA K2700, PREGIO 2.5D/2.7D 10.97-

View part

CTR Tie rod (with no end) CR0318

Tie rod (with no end) R (length: 275/309,6mm) fits: KIA CARENS I, CERATO, SHUMA, SHUMA I, SHUMA II 1.5/1.6/1.8 10.97-08.04

View part

CTR Tie rod (with no end) CR0319L

Tie rod (with no end) L (length: 224/262,5mm) fits: KIA CARNIVAL I, CARNIVAL II 2.5/2.9D 08.99-06.06

View part

CTR Tie rod (with no end) CR0319R

Tie rod (with no end) R (length: 224/325mm) fits: KIA CARNIVAL I 2.5/2.9D 08.99-10.01

View part

CTR Tie rod (with no end) CR0320

Tie rod (with no end) L/R (length: 160/198,5mm) fits: KIA BESTA 2.2D 07.92-12.03

View part

CTR Tie rod (with no end) CR0323L

Tie rod (with no end) L (length: 147/190mm) fits: KIA SORENTO I 2.4-3.5 08.02-12.11

View part

CTR Tie rod (with no end) CR0323R

Tie rod (with no end) R (length: 147/190mm) fits: KIA SORENTO I 2.4-3.5 08.02-12.11

View part

CTR Tie rod (with no end) CR0325

Tie rod (with no end) L/R (length: 260/294,6mm) fits: KIA AVELLA, RIO I 1.3/1.5 11.95-02.05

View part

CTR Tie rod (with no end) CR0326L

Tie rod (with no end) L (length: 224/262,5mm) fits: KIA CARNIVAL I, CARNIVAL II 2.5/2.9D 08.99-06.06

View part

CTR Tie rod (with no end) CR0326R

Tie rod (with no end) R (length: 224/262,5mm) fits: KIA CARNIVAL I, CARNIVAL II 2.5/2.9D 08.99-06.06

View part

CTR Tie rod (with no end) CR0327

Tie rod (with no end) L/R (length: 270/309,5mm) fits: KIA PICANTO I 1.0/1.1/1.1D 04.04-09.11

View part

CTR Tie rod (with no end) CR0328

Tie rod (with no end) L/R (length: 160/194,6mm) fits: KIA RIO II 1.4/1.6 03.05-12.11

View part

CTR Tie rod (with no end) CR0329

Tie rod (with no end) (length: 160/194,6mm, with a nut) fits: KIA RIO II 1.4/1.5D/1.6 03.05-12.11

View part

CTR Tie rod (with no end) CR0329L

Tie rod (with no end) L (length: 160/194,6mm) fits: KIA RIO II 1.4/1.5D/1.6 03.05-12.11

View part

CTR Tie rod (with no end) CR0330

Tie rod (with no end) L/R (length: 183/231,5mm) fits: KIA CARNIVAL III 2.2D/2.7/2.9D 04.06-06.15

View part

CTR Tie rod (with no end) CR0331

Tie rod (with no end) L/R (length: 160/198,5mm) fits: KIA BONGO, K2500, K2700 2.5D/2.7D/2.9D 10.99-

View part

CTR Tie rod (with no end) CR0332

Tie rod (with no end) L/R (length: 255/293,5mm) fits: KIA K2700, PREGIO 2.5D/2.7D 08.95-

View part

CTR Tie rod (with no end) CR0333

Tie rod (with no end) L/R (length: 160,7/199,2mm) fits: KIA K2500, K2700 2.5D/2.7D 10.99-

View part

CTR Tie rod (with no end) CR0334

Tie rod (with no end) L/R (length: 236/274,5mm) fits: KIA K2700 2.7D 10.99-

View part

CTR Tie rod (with no end) CR0335

Tie rod (with no end) L/R (length: 175/214,6mm) fits: HYUNDAI GRAND SANTA FÉ, SANTA FE IV, SANTA FÉ III KIA CARENS I, CARENS III, MAGENTIS II 1.6-2.7 11.05-11.20

View part

Buying with Partios

Buying CTR parts through Partios

Are these genuine CTR parts?

Yes. Every CTR line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source CTR parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for CTR lines that aren't currently available.

Do you supply CTR parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on CTR parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a CTR order?

It depends on the line. Stocked CTR items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for CTR parts?

No. There's no minimum order value or quantity on a Partios trade account. Some CTR lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account