Partios Wholesale catalogue

CTR Distributor | Suspension & Steering

Tie rod end (1,020) · Stabilizer link (954) · Wheel suspension track control arm, front (883) · Tie rod (with no end) (800) · Front ball joint (470) · Stabilizer bar bushing (290) · Front track control arm silent block (209) · Wheel suspension track control arm, rear (200) · 27 further part types (498)

6,258 current catalogue lines

About the CTR range

CTR covers suspension & steering at Partios. It has 6,258 lines across 35 part types, rather than depth in a single one. The largest groups are tie rod end (1,020), stabilizer link (954), wheel suspension track control arm, front (883), tie rod (with no end) (800) and front ball joint (470). Beyond those, 907 lines are spread across 29 further part types. That tail includes front track control arm silent block, wheel suspension track control arm, rear and rear wishbone silent block. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 6,258 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

CTR Front ball joint CB0282

Axle ball joint L/R (bottom front) (with ball joint with extra materials) fits: MAZDA 323 C IV, 323 F IV, 323 III, 323 S IV 1.3-1.8 01.87-10.96

View part

CTR Front ball joint CB0283

Axle ball joint L/R (bottom front) (cone diameter 65mm, with a nut) fits: FORD RANGER FORD USA EXPLORER MAZDA BT-50 2.5D-4.9 03.95-12.15

View part

CTR Front ball joint CB0284

Axle ball joint L/R (bottom front) (with a nut) fits: MAZDA MX-5 I, MX-5 II 1.6/1.8 05.90-10.05

View part

CTR Front ball joint CB0285

Axle ball joint L/R (bottom front) (with a nut)

View part

CTR Front ball joint CB0286

Axle ball joint L/R (bottom front) (with a nut) fits: FORD RANGER MAZDA BT-50 2.2/2.5D/3.0D 05.06-

View part

CTR Front ball joint CB0287

Axle ball joint L/R (bottom front) (with a nut) fits: FORD RANGER MAZDA BT-50 2.5D/3.0D 05.06-12.15

View part

CTR Front ball joint CB0288

Axle ball joint L/R (top front) (cone diameter 13,6mm, with a nut with extra materials) fits: FORD RANGER MAZDA B-SERIE, BT-50 2.0-3.0D 01.85-12.15

View part

CTR Front ball joint CB0289

Axle ball joint L/R (top front) (cone diameter 43mm, with a nut) fits: MAZDA 6 1.8-2.5 01.02-07.13

View part

CTR Front ball joint CB0290

Axle ball joint L/R (bottom front) (cone diameter 47mm) fits: FORD USA EDGE MAZDA CX-7, CX-9 2.0-3.7 06.06-

View part

CTR Front ball joint CB0291

Axle ball joint L/R (bottom front) (with a nut with extra materials)

View part

CTR Front ball joint CB0292

Axle ball joint L/R (bottom front) (with a nut) fits: MAZDA XEDOS 9 2.0/2.3/2.5 07.93-09.02

View part

CTR Front ball joint CB0293

Axle ball joint L/R (bottom/outer front) (cone diameter 44mm, With spring setting ring) fits: FORD B-MAX, ECOSPORT, FIESTA VI, KA, KA+ III, TOURNEO COURIER B460, TRANSIT COURIER B460 1.0-2.3 06.02-

View part

CTR Front ball joint CB0294

Axle ball joint L/R (bottom front) (cone diameter 46mm) fits: MAZDA 3, 6, CX-3, CX-5 1.5-2.5 11.11-

View part

CTR Front ball joint CB0295

Axle ball joint L/R (bottom front) (with a nut with extra materials) fits: NISSAN CHERRY III, PRAIRIE, SUNNY, SUNNY I 1.3-1.8 02.82-08.90

View part

CTR Front ball joint CB0296

Axle ball joint L/R (top front) (cone diameter 16,2mm, with a nut with extra materials) fits: FORD MAVERICK NISSAN CABSTAR, PATHFINDER I, PICK UP, TERRANO I, TERRANO II, URVAN 2.0-3.0D 11.82-

View part

CTR Front ball joint CB0299

Axle ball joint L/R (bottom front) (with a nut with extra materials) fits: NISSAN BLUEBIRD 1.6-2.0D 01.80-05.84

View part

CTR Front ball joint CB0300

Axle ball joint L/R (bottom front) (cone diameter 19,6mm, with a nut) fits: AUDI TT FORD MAVERICK NISSAN PATHFINDER I, PICK UP, TERRANO I, TERRANO II 1.8-3.0 03.86-06.06

View part

CTR Front ball joint CB0302

Axle ball joint L/R (top front) (with a nut with extra materials) fits: NISSAN VANETTE 1.5/2.0D/2.4 10.86-12.95

View part

CTR Front ball joint CB0303

Axle ball joint L/R (bottom front) (with a nut with extra materials) fits: NISSAN BLUEBIRD, PRAIRIE PRO, PRIMERA 1.6-2.4 12.85-03.98

View part

CTR Front ball joint CB0310

Axle ball joint L/R (bottom front) (with a nut with extra materials)

View part

CTR Front ball joint CB0311L

Axle ball joint L (bottom front) (with a nut with extra materials) fits: NISSAN CABSTAR, PICK UP, URVAN 1.6-2.5D 12.80-12.90

View part

CTR Front ball joint CB0311R

Axle ball joint R (bottom front) (with a nut with extra materials) fits: NISSAN CABSTAR, PICK UP, URVAN 1.6-2.5D 12.80-12.90

View part

CTR Front ball joint CB0313

Axle ball joint L/R (bottom front) (cone diameter 69mm, with a nut)

View part

CTR Front ball joint CB0314

Axle ball joint L/R (bottom front) (cone diameter 45mm, with a nut) fits: NISSAN ALMERA CLASSIC, ALMERA II, BLUEBIRD, JUKE, MAXIMA / MAXIMA QX IV, MAXIMA III, PRAIRIE PRO, PRIMERA 1.3-3.0 11.83-

View part

CTR Front ball joint CB0315

Axle ball joint L/R (bottom front) (cone diameter 59mm, with a nut) fits: NISSAN PICK UP, URVAN 2.0-2.5D 05.87-12.12

View part

CTR Front ball joint CB0316

Axle ball joint L/R (bottom front) (cone diameter 49,5mm, with a nut) fits: NISSAN LAUREL 2.4/2.8D 01.81-12.89

View part

CTR Front ball joint CB0318

Axle ball joint L/R (bottom front) (cone diameter 45mm, with a nut) fits: NISSAN 100NX, ALMERA I, PRIMERA, SUNNY III 1.4-2.0D 03.90-12.01

View part

CTR Front ball joint CB0318E

Axle ball joint L/R (bottom front) (cone diameter 45mm, with a nut) fits: NISSAN 100NX, ALMERA I, PRIMERA, SUNNY III 1.4-2.0D 03.90-12.01

View part

CTR Front ball joint CB0320

Axle ball joint L/R (bottom front) (cone diameter 48mm, with a nut) fits: NISSAN MAXIMA / MAXIMA QX IV 2.0/2.5/3.0 01.95-08.00

View part

CTR Front ball joint CB0321

Axle ball joint L/R (bottom front) (cone diameter 40mm, with a nut) fits: NISSAN MICRA II 1.0/1.3/1.4 08.92-02.03

View part

CTR Front ball joint CB0322

Axle ball joint L/R (bottom front) (cone diameter 45mm, with a nut) fits: NISSAN MICRA I 1.0/1.2 12.82-07.92

View part

CTR Front ball joint CB0323

Axle ball joint L/R (top front) (cone diameter 61mm, with a nut) fits: NISSAN NAVARA, NAVARA NP300, PICK UP 2.4/2.5D 02.98-

View part

CTR Front ball joint CB0324

Axle ball joint L/R (bottom front) (cone diameter 62,5mm, with a nut with extra materials) fits: NISSAN CABSTAR, NAVARA, NP300, PICK UP 2.4-3.2D 02.97-

View part

CTR Front ball joint CB0325

Axle ball joint L/R (bottom front) (with a nut) fits: NISSAN PATHFINDER II, TERRANO II 2.7D-3.5 10.92-12.04

View part

CTR Front ball joint CB0326

Axle ball joint L/R (bottom front) (cone diameter 48mm, with a nut) fits: NISSAN ALMERA II, ALMERA TINO, CEFIRO III, MAXIMA / MAXIMA QX V, PRIMERA VW TOUAREG 1.6-3.5 01.00-

View part

CTR Front ball joint CB0327

Axle ball joint L/R (bottom front) (with a nut) fits: NISSAN CARAVAN, URVAN 2.0 10.00-09.07

View part

CTR Front ball joint CB0328

Axle ball joint L/R (bottom front) (with a nut) fits: FORD MAVERICK NISSAN TERRANO II 2.4-3.3 10.92-09.07

View part

CTR Front ball joint CB0329

Axle ball joint R (bottom front) (with a nut) fits: NISSAN LARGO, SERENA 2.0/2.0D 11.92-05.05

View part

CTR Front ball joint CB0330

Axle ball joint L (bottom front) (with a nut) fits: NISSAN LARGO, SERENA 2.0/2.0D 11.92-05.05

View part

CTR Front ball joint CB0331

Axle ball joint L/R (bottom front) (cone diameter 45mm) fits: KIA SORENTO I MITSUBISHI GRANDIS NISSAN CUBE, JUKE, LEAF, MICRA IV, MURANO II, NAVARA NP300, NOTE, NV200 1.0-Electric 04.04-

View part

CTR Front ball joint CB0332

Axle ball joint L/R (bottom front) (cone diameter 48mm) fits: DACIA DUSTER NISSAN JUKE, MICRA IV, MURANO I, MURANO II, NAVARA NP300, PULSAR, QASHQAI +2, QASHQAI I, QASHQAI II, QUEST 1.0-3.5 05.03-

View part

CTR Front ball joint CB0333

Axle ball joint L/R (bottom front) (cone diameter 62mm) fits: NISSAN ARMADA MK I, NAVARA NP300 2.3D-5.6 08.03-

View part

CTR Front ball joint CB0334

Axle ball joint L/R (top front) (cone diameter 51,5mm, with a nut) fits: INFINITI QX80 NISSAN ARMADA MK I, NAVARA NP300, PATHFINDER III, PICK UP RENAULT ALASKAN 2.3D-5.6 02.98-

View part

CTR Front ball joint CB0335

Axle ball joint L/R (bottom front) (cone diameter 49,5mm, with a nut) fits: NISSAN 180SX, 200SX 1.8/2.0 07.88-12.99

View part

CTR Front ball joint CB0336

Axle ball joint L/R (bottom front) (cone diameter 40mm) fits: NISSAN MICRA IV, NOTE 1.2/1.2LPG/1.5D 05.10-

View part

CTR Front ball joint CB0337

Axle ball joint L/R (bottom front) (cone diameter 46mm) fits: NISSAN CUBE, MICRA C+C III, MICRA II, MICRA III, NOTE 1.0-1.6 08.92-08.13

View part

CTR Front ball joint CB0339

Axle ball joint (bottom front) (with a nut with extra materials) fits: NISSAN QUEST 3.0 05.92-09.98

View part

CTR Front ball joint CB0340

Axle ball joint L/R (bottom front) (cone diameter 62mm) fits: INFINITI QX56 NISSAN ARMADA MK I, NAVARA NP300, PATHFINDER III, TITAN, XTERRA 2.5D-5.6ALK 08.03-

View part

Buying with Partios

Buying CTR parts through Partios

Are these genuine CTR parts?

Yes. Every CTR line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source CTR parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for CTR lines that aren't currently available.

Do you supply CTR parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on CTR parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a CTR order?

It depends on the line. Stocked CTR items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for CTR parts?

No. There's no minimum order value or quantity on a Partios trade account. Some CTR lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account