Partios Wholesale catalogue

CTR Distributor | Suspension & Steering

Tie rod end (1,020) · Stabilizer link (954) · Wheel suspension track control arm, front (883) · Tie rod (with no end) (800) · Front ball joint (470) · Stabilizer bar bushing (290) · Front track control arm silent block (209) · Wheel suspension track control arm, rear (200) · 27 further part types (498)

6,258 current catalogue lines

About the CTR range

CTR covers suspension & steering at Partios. It has 6,258 lines across 35 part types, rather than depth in a single one. The largest groups are tie rod end (1,020), stabilizer link (954), wheel suspension track control arm, front (883), tie rod (with no end) (800) and front ball joint (470). Beyond those, 907 lines are spread across 29 further part types. That tail includes front track control arm silent block, wheel suspension track control arm, rear and rear wishbone silent block. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 6,258 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

CTR Front ball joint CB0170

Axle ball joint L/R (bottom front) (with extra materials) fits: DAEWOO LEGANZA 2.0/2.2 06.97-04.04

View part

CTR Front ball joint CB0171

Axle ball joint L/R (bottom front) fits: CHEVROLET EPICA, EVANDA DAEWOO EVANDA 2.0 08.02-

View part

CTR Front ball joint CB0173

Axle ball joint L/R (bottom front) (cone diameter 16mm) fits: CHEVROLET REZZO DAEWOO TACUMA / REZZO 1.6/1.8/2.0 09.00-

View part

CTR Front ball joint CB0174

Axle ball joint L/R (bottom front) (cone diameter 46mm, with a nut) fits: HYUNDAI PONY 1.3/1.5 10.85-01.95

View part

CTR Front ball joint CB0175

Axle ball joint L/R (bottom front) (cone diameter 60mm, with a nut) fits: HYUNDAI H100 MITSUBISHI L 300 III 1.6-2.5D 11.86-02.06

View part

CTR Front ball joint CB0176

Axle ball joint L/R (top front) (cone diameter 50mm, with a nut) fits: HYUNDAI GALLOPER I, GALLOPER II MITSUBISHI L 300 / DELICA II, PAJERO I 2.0-3.0 12.82-12.03

View part

CTR Front ball joint CB0177

Axle ball joint L/R (bottom front) (with a nut with extra materials) fits: HYUNDAI H100 MITSUBISHI L 300 / DELICA II, L200 2.0/2.5D 11.86-12.97

View part

CTR Front ball joint CB0178

Axle ball joint L/R (bottom front) (with a nut with extra materials) fits: HYUNDAI GALLOPER I, GALLOPER II MITSUBISHI L 300 III, L200, PAJERO I 2.0-3.0 12.82-05.04

View part

CTR Front ball joint CB0179

Axle ball joint L/R (bottom front) (cone diameter 49mm, with a nut) fits: HYUNDAI SONATA III 1.8/2.0/3.0 05.93-06.98

View part

CTR Front ball joint CB0181

Axle ball joint L/R (bottom front) (with a nut) fits: HYUNDAI H-1, H-1 / STAREX MITSUBISHI L 300 III, L400 2.0-2.6D 07.94-12.07

View part

CTR Front ball joint CB0182

Axle ball joint L/R (top front) (with a nut) fits: HYUNDAI GRACE, H-1, H-1 / STAREX, H100, PORTER MITSUBISHI DELICA / SPACE GEAR, L 300 III, L400 1.6-2.6D 08.86-

View part

CTR Front ball joint CB0183

Axle ball joint R (bottom front) (with a nut with extra materials) fits: HYUNDAI H-1, H-1 / STAREX 2.4/2.5D 02.98-12.07

View part

CTR Front ball joint CB0184

Axle ball joint L (bottom front) (with a nut with extra materials) fits: HYUNDAI H-1, H-1 / STAREX 2.4/2.5D 02.98-12.07

View part

CTR Front ball joint CB0185

Axle ball joint L/R (bottom front) (cone diameter 18mm, with a nut) fits: HYUNDAI SONATA V KIA MAGENTIS I, OPIRUS 2.0-3.5 05.01-12.10

View part

CTR Front ball joint CB0186

Axle ball joint L/R (bottom front) (cone diameter 46mm, with a nut) fits: VOLVO S40 I, V40 AUDI 80 B3 HYUNDAI ACCENT, ACCENT I, ACCENT II, ACCENT III, ACCENT IV, COUPE I, COUPE II 1.0-3.5 11.83-

View part

CTR Front ball joint CB0187

Axle ball joint L/R (bottom front) (cone diameter 49mm) fits: HYUNDAI EQUUS / CENTENNIAL, HIGHWAY, SANTA FÉ I, SANTA FÉ II, TRAJET KIA SORENTO I, SORENTO II MITSUBISHI GRANDIS 2.0-4.5 10.99-12.15

View part

CTR Front ball joint CB0188

Axle ball joint L/R (bottom front) (cone diameter 43mm, with a nut) fits: HYUNDAI ATOS 1.0/1.1 02.98-12.10

View part

CTR Front ball joint CB0189

Axle ball joint L/R (bottom front) (with a nut) fits: HYUNDAI TERRACAN 2.5D/2.9D/3.5 11.01-12.06

View part

CTR Front ball joint CB0190

Axle ball joint L/R (top front) (with a nut) fits: HYUNDAI TERRACAN 2.5D/2.9D/3.5 11.01-12.06

View part

CTR Front ball joint CB0191

Axle ball joint L/R (bottom front) (with a nut) fits: HYUNDAI GRANDEUR, SONATA V 2.0-3.3 01.05-12.11

View part

CTR Front ball joint CB0193

Axle ball joint L/R (top front) (cone diameter 40,4mm, with a nut) fits: HYUNDAI GETZ, SONATA IV, SONATA V, XG KIA MAGENTIS I, OPIRUS 1.1-3.5 03.98-12.10

View part

CTR Front ball joint CB0196

Axle ball joint L/R (bottom front) (with a nut) fits: HYUNDAI PONY, PONY / EXCEL, S 1.3/1.5 10.85-05.96

View part

CTR Front ball joint CB0197

Axle ball joint L/R (bottom front) (with a nut) fits: HYUNDAI ELANTRA IV, I30 KIA CARENS I, CARENS III, CEE'D, CERATO II, CERATO III, MAGENTIS II, PRO CEE'D 1.4-2.7 11.05-12.16

View part

CTR Front ball joint CB0199

Axle ball joint L/R (bottom front) (with extra materials) fits: HYUNDAI EQUUS / CENTENNIAL, HIGHWAY, SANTA FÉ I, SANTA FÉ II, TRAJET 2.0-4.5 10.99-12.12

View part

CTR Front ball joint CB0200

Axle ball joint L/R (bottom front) (cone diameter 65mm, with a nut) fits: HYUNDAI EQUUS / CENTENNIAL, GENESIS 3.8 03.09-12.16

View part

CTR Front ball joint CB0201

Axle ball joint L/R (top front) (cone diameter 42mm, with a nut) fits: HYUNDAI GETZ, GRANDEUR, SONATA V KIA OPIRUS 1.1-3.8 01.05-10.12

View part

CTR Front ball joint CB0202

Axle ball joint L/R (bottom front) (cone diameter 44mm, with a nut) fits: KIA JOICE 2.0 02.00-09.03

View part

CTR Front ball joint CB0203

Axle ball joint L/R (bottom front) (with a nut) fits: KIA SPORTAGE II 2.0/2.0D/2.7 09.04-12.10

View part

CTR Front ball joint CB0204

Axle ball joint R (bottom front) (with a nut) fits: KIA SPORTAGE II 2.0/2.0D/2.7 09.04-12.10

View part

CTR Front ball joint CB0205

Axle ball joint L/R (bottom front) (cone diameter 46mm, with a nut) fits: VOLVO S40 I, V40 HYUNDAI ACCENT, ACCENT I, ACCENT II, ACCENT III, ACCENT IV, ACCENT V, COUPE II, CRETA 1.0-3.0 09.88-

View part

CTR Front ball joint CB0206

Axle ball joint L/R (bottom front) (cone diameter 18mm, with extra materials) fits: HYUNDAI I40 I CW, IX35, SONATA V, TUCSON KIA SPORTAGE III 1.6-Electric 02.06-05.19

View part

CTR Front ball joint CB0207

Axle ball joint L/R (bottom front) (with a nut) fits: HYUNDAI LANTRA I, PONY, PONY / EXCEL, S 1.3-1.8 10.89-05.96

View part

CTR Front ball joint CB0208

Axle ball joint L/R (bottom front) (cone diameter 18mm, with extra materials) fits: HYUNDAI GRAND SANTA FÉ, GRANDEUR, I30, SANTA FE IV, SANTA FÉ III, SONATA VI KIA CADENZA I 1.0-Electric 06.09-

View part

CTR Front track control arm silent block CB0209

Axle ball joint L/R (rear) fits: HYUNDAI GENESIS 3.8 01.08-02.14

View part

CTR Front ball joint CB0210L

Axle ball joint L (bottom front) (with extra materials) fits: HYUNDAI IX35, SONATA VII, TUCSON KIA OPTIMA, SPORTAGE IV, SPORTAGE V 1.6-2.4 11.13-

View part

CTR Front ball joint CB0210R

Axle ball joint R (bottom front) (cone diameter 18,2mm, with extra materials) fits: HYUNDAI IX35, SONATA VII, TUCSON KIA OPTIMA, SPORTAGE IV, SPORTAGE V 1.6-2.4 11.13-

View part

CTR Front ball joint CB0211L

Axle ball joint L (bottom front) (with a nut with extra materials) fits: HYUNDAI ELANTRA VI, I30, KONA KIA CEED, CERATO IV, PROCEED, XCEED 1.0-Electric 10.15-

View part

CTR Front ball joint CB0211R

Axle ball joint R (bottom front) (with a nut with extra materials) fits: HYUNDAI ELANTRA VI, I30, KONA KIA CEED, CERATO IV, PROCEED, XCEED 1.0-Electric 10.15-

View part

CTR Front ball joint CB0212

Axle ball joint L/R (bottom front) (cone diameter 18mm, with extra materials) fits: HYUNDAI IX35 KIA SPORTAGE III 1.6-Electric 08.09-12.16

View part

CTR Front ball joint CB0215

Axle ball joint L/R (bottom front) (with a nut with ball joint with extra materials with pads) fits: KIA CARENS I, CERATO, PICANTO I, SHUMA, SHUMA I, SHUMA II 1.1D-2.0D 10.97-04.11

View part

CTR Front ball joint CB0216

Axle ball joint L/R (bottom front) (cone diameter 60mm, with a nut) fits: KIA PREGIO 2.5D/2.7D 08.95-

View part

CTR Front ball joint CB0217

Axle ball joint L/R (bottom front) (with a nut) fits: KIA SORENTO I 2.4-3.5 08.02-12.11

View part

CTR Front ball joint CB0218

Axle ball joint L/R (bottom front) (with a nut) fits: KIA K2500 II 2.5D 07.04-

View part

CTR Front ball joint CB0219

Axle ball joint L/R (bottom front) (cone diameter 46mm) fits: HYUNDAI GETZ, I10 I KIA PICANTO I, SPORTAGE II 1.0-2.7 04.04-12.13

View part

CTR Front ball joint CB0220

Axle ball joint L/R (bottom front) (cone diameter 15mm, with a nut) fits: HYUNDAI ACCENT II, ACCENT III KIA RIO II 1.4/1.5D/1.6 12.02-12.11

View part

CTR Front ball joint CB0221

Axle ball joint L/R (bottom front) (with extra materials) fits: HYUNDAI H-1 CARGO, H-1 TRAVEL, IX55 KIA CARNIVAL III 2.2D-3.8 04.06-

View part

CTR Front ball joint CB0222

Axle ball joint L/R (bottom front) (with a nut) fits: KIA BORREGO 3.0D/3.8 11.07-

View part

CTR Front ball joint CB0223

Axle ball joint (bottom front) (cone diameter 60mm, with a nut) fits: KIA BONGO, K2900 2.9D 10.03-

View part

Buying with Partios

Buying CTR parts through Partios

Are these genuine CTR parts?

Yes. Every CTR line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source CTR parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for CTR lines that aren't currently available.

Do you supply CTR parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on CTR parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a CTR order?

It depends on the line. Stocked CTR items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for CTR parts?

No. There's no minimum order value or quantity on a Partios trade account. Some CTR lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account