Partios Wholesale catalogue
Chassis PRO Supplier | Suspension & Steering
Tie rod end (69) · Wheel suspension track control arm, front (61) · Stabilizer link (60) · Front ball joint (38) · Tie rod (with no end) (32) · Wheel suspension track control arm, rear (19) · Front track control arm silent block (13) · Stabilizer bar bushing (9) · 9 further part types (23)
379 current catalogue lines
About the CHASSIS PRO range
Partios carries 379 Chassis PRO lines of suspension & steering, spread across 17 part types. The largest groups are tie rod end (69), wheel suspension track control arm, front (61), stabilizer link (60), front ball joint (38) and tie rod (with no end) (32). Beyond those, 45 lines are spread across 11 further part types. That tail includes front track control arm silent block, stabilizer bar bushing and steering gear arm. The range suits workshops, suspension specialists, motor factors and exporters. Suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 379 lines, it is a targeted range rather than a wide one.
Catalogue products
Vehicle references are indicative — confirm against the article number.
CHASSIS PRO Wheel suspension track control arm, front K623723AT
Front axle track control arm L fits: CHRYSLER PACIFICA 3.6/3.6H 01.17-
View partCHASSIS PRO Steering gear arm K6251TAT
Steering gear arm R vehicle with the steering wheel on the left side fits: CHEVROLET BLAZER S10, S10 GMC JIMMY, S15 JIMMY 2.2/4.3 10.87-09.05
View partCHASSIS PRO Steering gear arm K6255AT
Steering gear arm L fits: CHEVROLET BLAZER S10, S10 GMC JIMMY 2.2/4.3 01.94-09.05
View partCHASSIS PRO Front track control arm silent block K6282AT
Front track control arm silent block bottom L/R (2WD vehicles) fits: CHEVROLET BLAZER S10, S10 GMC JIMMY, S15 JIMMY 2.2/4.3 01.89-05.05
View partCHASSIS PRO Front ball joint K6292AT
Axle ball joint L/R (top) fits: CADILLAC ESCALADE CHEVROLET ASTRO, C1500, C2500, EXPRESS, EXPRESS 1500, EXPRESS 2500, K1500, K2500, SUBURBAN, TAHOE GMC SAFARI, YUKON 4.3-7.4 09.87-
View partCHASSIS PRO Wheel suspension track control arm, front K641334AT
Front axle track control arm L bottom front fits: CHRYSLER 200, SEBRING DODGE AVENGER, JOURNEY FIAT FREEMONT 2.0-3.6ALK 01.07-
View partCHASSIS PRO Wheel suspension track control arm, front K641504AT
Front axle track control arm L bottom fits: DODGE RAM, RAM 1500 RAM 1500 3.0D-5.9 06.01-
View partCHASSIS PRO Wheel suspension track control arm, front K641533AT
Front axle track control arm L bottom (4WD vehicles) fits: CHRYSLER 300 C, 300C DODGE MAGNUM, MAGNUM II 2.7-6.1 09.04-
View partCHASSIS PRO Wheel suspension track control arm, front K641534AT
Front axle track control arm R bottom bottom (4WD vehicles) fits: CHRYSLER 300 C, 300C DODGE MAGNUM, MAGNUM II 2.7-6.1 09.04-
View partCHASSIS PRO Wheel suspension track control arm, rear K641536AT
Rear axle track control arm L (top, rear, diagonal, aluminium) fits: CHRYSLER 300 C, 300C, PACIFICA DODGE CHALLENGER, CHALLENGER SE, CHALLENGER SRT8, CHARGER, MAGNUM, MAGNUM II 2.7-6.4 08.03-
View partCHASSIS PRO Wheel suspension track control arm, rear K641794AT
Rear axle track control arm L/R (bottom, rear, transverse) fits: DODGE NITRO JEEP CHEROKEE, COMMANDER, GRAND CHEROKEE III, LIBERTY 2.8D-6.1 10.04-
View partCHASSIS PRO Wheel suspension track control arm, rear K641865AT
Rear axle track control arm L/R (top, rear, transverse) fits: JEEP COMMANDER, GRAND CHEROKEE III 3.0D-6.1 10.04-10.11
View partCHASSIS PRO Wheel suspension track control arm, rear K641914AT
Rear axle track control arm L/R (bottom/longitudinal) fits: FORD USA EXPEDITION LINCOLN NAVIGATOR 5.4 09.04-11.17
View partCHASSIS PRO Wheel suspension track control arm, rear K641999AT
Rear axle track control arm L/R (top, front) fits: CHRYSLER PACIFICA 3.5/3.8/4.0 08.03-09.08
View partCHASSIS PRO Wheel suspension track control arm, rear K642169AT CP
Rear axle track control arm L/R (top) fits: DODGE NITRO JEEP CHEROKEE, LIBERTY 2.8D/3.7/4.0 09.06-
View partCHASSIS PRO Wheel suspension track control arm, front K642193AT
Front axle track control arm L/R in the back/transverse front (RWD vehicles) fits: CHRYSLER 300C DODGE CHALLENGER, CHALLENGER SRT8, CHARGER LANCIA THEMA 3.0D-6.4 09.07-
View partCHASSIS PRO Wheel suspension track control arm, rear K642901AT
Rear axle track control arm L/R (bottom, rear, transverse, short) fits: CHRYSLER 200 DODGE AVENGER, JOURNEY FIAT FREEMONT 2.0-3.6ALK 06.07-
View partCHASSIS PRO Stabilizer bar bushing K6439AT
Stabilizer bar bushing L/R (33mm, 2 pcs. set) fits: CADILLAC ESCALADE CHEVROLET ASTRO, AVALANCHE, AVALANCHE 1500, BLAZER S10, TAHOE GMC YUKON HUMMER HUMMER H2, HUMMER H2 SUT 4.3-8.1 10.84-
View partCHASSIS PRO Steering gear arm K6533AT
Steering gear arm fits: CHEVROLET EXPRESS 1500, EXPRESS 2500, EXPRESS 3500 4.3/5.7 09.95-12.02
View partCHASSIS PRO Steering gear arm K6535AT
Steering gear arm R fits: HUMMER HUMMER H2, HUMMER H2 SUT 09.02-
View partCHASSIS PRO Steering gear arm K6536AT
Steering gear arm L (4 marking notches) fits: CADILLAC ESCALADE CHEVROLET AVALANCHE, AVALANCHE 1500, SILVERADO 1500, TAHOE GMC SIERRA, YUKON HUMMER HUMMER H2, HUMMER H2 SUT 10.98-
View partCHASSIS PRO Front ball joint K6540AT
Axle ball joint L/R (top) fits: CADILLAC ESCALADE CHEVROLET AVALANCHE, AVALANCHE 1500, EXPRESS 1500, SILVERADO 1500, SUBURBAN, TAHOE GMC SAVANA 1500, SIERRA, YUKON 4.3-6.0 01.96-
View partCHASSIS PRO Front ball joint K6541AT
Axle ball joint L/R (bottom) fits: CADILLAC ESCALADE CHEVROLET AVALANCHE, AVALANCHE 1500, SILVERADO 1500, SUBURBAN, SUBURBAN 1500, TAHOE, TAHOE LTZ GMC SAVANA 1500, SIERRA 4.3-6.2LPG 10.98-
View partCHASSIS PRO Stabilizer link K6600AT
Stabilizer link front L/R fits: CHEVROLET ALERO, BLAZER S10, S10 GMC JIMMY 2.2-4.3 01.94-09.05
View partCHASSIS PRO Reaction bar K661097AT
Control rod rear fits: CHRYSLER GRAND VOYAGER V, TOWN & COUNTRY, VOYAGER V DODGE GRAND 2.8D-4.0 06.07-
View partCHASSIS PRO Stabilizer link K6630AT
Stabilizer link front L/R fits: BUICK LESABRE CADILLAC DEVILLE CHEVROLET ASTRO, C1500, CAMARO 2.5-6.6 01.70-05.05
View partCHASSIS PRO Steering gear arm K6654AT
Steering gear arm L (3 marking notches) fits: CADILLAC ESCALADE CHEVROLET AVALANCHE, AVALANCHE 1500, TAHOE GMC YUKON HUMMER HUMMER H2, HUMMER H2 SUT 10.98-
View partCHASSIS PRO Front ball joint K6663AT
Axle ball joint L/R (bottom) fits: CHEVROLET SSR, TRAILBLAZER ISUZU ASCENDER SAAB 9-7X 4.2/5.3/6.0 09.01-
View partCHASSIS PRO Front ball joint K6664AT
Axle ball joint L/R (top) fits: CHEVROLET SSR, TRAILBLAZER ISUZU ASCENDER SAAB 9-7X 4.2/5.3/6.0 09.01-
View partCHASSIS PRO Stabilizer link K6665AT
Stabilizer link front R 90mm fits: CHEVROLET TRAILBLAZER ISUZU ASCENDER 4.2/5.3 09.01-
View partCHASSIS PRO Stabilizer link K6666AT
Stabilizer link front L 90mm fits: CHEVROLET TRAILBLAZER ISUZU ASCENDER 4.2/5.3 09.01-
View partCHASSIS PRO Front ball joint K6696AT
Axle ball joint L/R (top) fits: CHEVROLET SILVERADO 1500, SILVERADO 2500, SILVERADO 2500 HD GMC SIERRA HUMMER HUMMER H2, HUMMER H2 SUT 4.3-6.6D 10.98-
View partCHASSIS PRO Steering gear arm K6722AT
Steering gear arm L/R fits: CADILLAC ESCALADE CHEVROLET BLAZER, SILVERADO 1500, SUBURBAN, TAHOE GMC YUKON 4.3-6.5D 04.91-12.07
View partCHASSIS PRO Stabilizer link K700050AT
Stabilizer link rear L/R fits: FORD USA MUSTANG 3.7-5.4 12.04-
View partCHASSIS PRO Stabilizer link K700507AT
Stabilizer link rear L/R fits: FORD USA MUSTANG 3.7-5.4 12.04-
View partCHASSIS PRO Stabilizer link K700908AT
Stabilizer link front L/R fits: JEEP GLADIATOR, WRANGLER IV 2.0-6.4 09.17-
View partCHASSIS PRO Stabilizer link K700909AT
Stabilizer link rear L/R 78mm fits: VW ATLAS 2.0/3.6 12.16-
View partCHASSIS PRO Front ball joint K7206TAT
Axle ball joint (top front) fits: DODGE RAM 1500, RAM 2500, RAM 3500 3.9-8.0 04.91-08.02
View partCHASSIS PRO Suspension fitting elements K7256AT
Suspension mounting elements front L/R (suspension adjustment) fits: CHRYSLER PACIFICA, PT CRUISER, TOWN & COUNTRY, VOYAGER III, VOYAGER IV, VOYAGER V DODGE CARAVAN, GRAND, JOURNEY 1.6-4.0 01.95-
View partCHASSIS PRO Stabilizer link K7274AT
Stabilizer link front L/R (2WD vehicles) fits: DODGE DURANGO 3.9-5.9 01.98-12.03
View partCHASSIS PRO Stabilizer bar bushing K7353AT
Stabilizer bar bushing front L/R fits: DODGE RAM 1500 5.7 10.08-
View partCHASSIS PRO Stabilizer bar bushing K7383AT
Stabilizer bar bushing front L/R (33mm, 2 pcs. set) fits: CHRYSLER ASPEN DODGE DAKOTA, DURANGO, RAM 1500 3.7-5.9 10.00-
View partCHASSIS PRO Front track control arm silent block K7389AT
Front track control arm silent block bottom L/R (16,8x70,9 set for track control arm) fits: DODGE NITRO JEEP CHEROKEE, LIBERTY 2.4-4.0 01.01-
View partCHASSIS PRO Wheel suspension track control arm, front K7424AT
Front axle track control arm L/R top top fits: CHRYSLER ASPEN DODGE DURANGO, RAM 1500 3.7-5.9 06.01-12.10
View partCHASSIS PRO Front ball joint K7460AT
Axle ball joint L/R (top front) (4WD vehicles) fits: DODGE RAM 1500, RAM 2500, RAM 3500 RAM 2500, 3500 0.06-8.0 06.01-
View partCHASSIS PRO Front ball joint K7469AT
Axle ball joint L/R (bottom) (RWD vehicles adjustable) fits: CHRYSLER 300 C, 300C DODGE CHALLENGER, CHALLENGER SE, CHARGER, MAGNUM LANCIA THEMA 2.7-6.4 09.04-
View partCHASSIS PRO Stabilizer link K750026AT
Stabilizer link front L/R fits: CHRYSLER ASPEN DODGE DURANGO 3.7/4.7/5.7 11.03-12.10
View partCHASSIS PRO Stabilizer link K750029AT
Stabilizer link rear L/R 76,5mm fits: FORD USA FUSION MAZDA 6 1.8-2.3 01.02-12.09
View partBuying with Partios
Buying CHASSIS PRO parts through Partios
Are these genuine CHASSIS PRO parts?
- Yes. Every CHASSIS PRO line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source CHASSIS PRO parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for CHASSIS PRO lines that aren't currently available.
Do you supply CHASSIS PRO parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on CHASSIS PRO parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a CHASSIS PRO order?
- It depends on the line. Stocked CHASSIS PRO items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for CHASSIS PRO parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some CHASSIS PRO lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account