Partios Wholesale catalogue

BTA Distributor | Parts

Wheel bearing kit (1,254) · PTO driveshaft (715) · Multiple v-belt tensioning roll (470) · Wheel hub (420) · Driveshaft elements pto (407) · Multi v-belt pulley (371) · Multi-v belt tensioner (302) · Propeller shaft support (227) · 119 further part types (1,836)

6,013 current catalogue lines

About the BTA range

The BTA range at Partios is broad rather than specialised. It has 6,013 lines spanning 127 part types across several vehicle systems. The largest groups are wheel bearing kit (1,254), PTO driveshaft (715), multiple V-belt tensioning roll (470), wheel hub (420) and driveshaft elements PTO (407). Beyond those, 2,365 lines are spread across 121 further part types. That tail includes multi-V belt tensioner, propeller shaft support and alternator pulley. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 6,013 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

BTA multi-V belt spring - vibration damper B05-AG-088

V-belt vibration damper fits: JOHN DEERE 100, 200, 300, 400, 600, 6000 204-K181

View part

BTA Multi-V belt tensioner B05-AG-090

Multi-V belt tensioner fits: CASE IH 1046, 1046 A, 1055, 1055 A, 1055 XL, 1055 XLA, 1056, 1056 A, 1056 XL, 1056 XLA, 1246, 1246 A, 1255, 1255 A, 1255 XL, 1255 XLA, 1455, 1455 A, 1455 CM XLA

View part

BTA Crankshaft pulley B05-AG-091

Crankshaft pulley fits: FENDT 206 F FARMER, 206 FA FARMER, 206 S FARMER, 206 V FARMER, 206 VA FARMER, 207 F FARMER, 207 F VARIO, 207 FA FARMER, 207 FA VARIO, 207 S FARMER, 207 V FARMER

View part

BTA Crankshaft pulley B05-AG-092

Crankshaft pulley fits: FENDT 206 F FARMER, 206 FA FARMER, 206 S FARMER, 206 V FARMER, 206 VA FARMER, 207 F FARMER, 207 F VARIO, 207 FA FARMER, 207 FA VARIO, 207 S FARMER, 207 V FARMER

View part

BTA Timing sprocket wheel B05-AG-094

Camshaft sprocket/gear fits: CLAAS 38, 48, 56, 58, 58 S, 66, 68 JCB 1400B, 1550B, 2, 2CX, 2CXL, 2CXS, 2CXSL, 2CX-SMO, 3, 3C, 3CN, 3CS, 3CX, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 3D, 3D 111, 3D-4, 3DS

View part

BTA Crankshaft pulley B05-AG-096

Crankshaft pulley fits: FENDT 240 FARMER, 240 S FARMER, 250 S FARMER, 250 SA FARMER, 250 V FARMER, 250 VA FARMER, 260 P FARMER, 260 PA FARMER, 260 S FARMER, 260 SA FARMER, 260 V FARMER

View part

BTA Crankshaft pulley B05-AG-097

Crankshaft pulley fits: FENDT 922 VARIO, 924 VARIO, 927 VARIO, 930 VARIO, 933 VARIO, 936 VARIO, 939 VARIO

View part

BTA Multi-V-belt tensioner bearing B05-AG-099

Multi-ribbed belt tensioner bearing fits: CASE IH 1000 1046/1046 A/1055/1055 A/1055 XL/1055 XLA/1056/1056 A/1056 XL/1056 XLA/1246/1246 A/1255/1255 A/1255 XL/1255 XLA/1455/1455 A/1455 CM XLA/1455 XL/14

View part

BTA Pneumatic clutch bearing B05-AG-100

Hydraulic concentric bearing 46,5x106,2mm fits: FENDT 1 / 2 / 3 / 4 / 5, 100, 200, 300, AGROBIL CASE IH C, CS, MAXXUM CASE-STEYR 8000, 900, 9000, M 900, M 9000 (SUPER M) CLAAS AXOS, CELTIS

View part

BTA Axle shaft B05-AG-1000

Drive axle shaft fits: MASSEY FERGUSON 275, 285, 290, 390 E, 393 LX, 4315, 4325, 4335, 4360, 4365, 4435, 5445, 5455 MC CORMICK B100 MAX, B105 MAX, B90 MAX, B95 MAX, C-MAX 100 T3, C-MAX 75

View part

BTA Steering column bearing B05-AG-1003

Steering column bearing fits: MASSEY FERGUSON 135, 165, 168, 175, 175 S, 185, 188, 265, 275, 285, 290

View part

BTA Multi V-belt pulley B05-AG-1005

Multi V-belt pulley fits: JOHN DEERE 2054, 2056, 2058, 2064, 2066, 2254, 2256, 2258, 2264, 2266, 2266E, 6620, 7720, 7721, 8820, 9400, 9410, 9450, 9500, 9501, 9510, 9550, 9560, 9600, 9610, 9650

View part

BTA Multi V-belt pulley B05-AG-1006

Multi V-belt pulley fits: JOHN DEERE 9400, 9410, 9450, 9500, 9501, 9510, 9540, 9550, 9560, 9560 STS, 9570 STS, 9580, 9600, 9610, 9640, 9650, 9650 STS, 9660, 9660 STS, 9660 WTS, 9680, 9750 STS

View part

BTA Clutch release bearing B05-AG-101

Clutch thrust bearing (49,5x92x64) fits: JOHN DEERE 1020, 1030, 1030 OU, 1030VU, 1035, 1035EF, 1120, 1130, 1350, 1530, 1550, 1630, 1630OU, 1630VU, 1635, 1635EF, 1635EV, 1750, 1830, 1850, 2020, 2030

View part

BTA Multiple V-belt tensioning roll B05-AG-1010

Multiple V-belt tensioning roll fits: MASSEY FERGUSON 6497, 6499 (PERKINS 6 CYL), 6499 (SISU 74 CTA 6 CYL), 8450, 8460 VALTRA S 230, S 240, S 260, S 280

View part

BTA Industrial bearing B05-AG-1012

Needle bearing fits: JOHN DEERE 5065M, 5070M 2WD, 5070M 4WD, 5075M, 5080M 2WD, 5080M 4WD, 5085M, 5085M 2WD, 5090M 2WD, 5090M 4WD, 5090R, 5095M 2WD, 5095M 4WD, 5095MH, 5100M 2WD, 5100M 4WD

View part

BTA Industrial bearing B05-AG-1015

Needle bearing fits: CASE IH 120 2WD, 120 4WD, 130 2WD, 130 4WD, 140 2WD, 140 4WD NEW HOLLAND 555 E, 575 E, 655 E, 675 E, F 100, F 100 DT, F 110, F 110 DT, F 115, F 115 DT, F 120, F 120 DT

View part

BTA Industrial bearing B05-AG-1016

Needle bearing fits: CASE IH 105 C, 80V, 85 C, 90, 90V, 95, 95 C, 1060 C, 1070 N, 1075 C, 1075 N, 1085 C, 1095 C, 1095 N, 95 2WD, 95 4WD, 95 HC PLUS FIAT 70-90 DT, 72-86 F DT, 72-86 LP DT

View part

BTA Industrial bearing B05-AG-1017

Needle bearing fits: CASE IH 100 C, 105 C, 110 C, 120 C, 80, 85 C, 90, 90 C, 95, 95 C NEW HOLLAND T4.110 F, T4.115, TD 5050, TD 85F

View part

BTA Industrial bearing B05-AG-1018

Needle bearing fits: JOHN DEERE 1040, 1140, 1350, 1550, 1640, 1750, 1840, 1850, 2040, 2040S, 2140, 2150 2WD, 2150 4WD, 2155, 2250, 2255, 2350 2WD, 2350 4WD, 2355, 2355N, 2450, 2550 2WD

View part

BTA Industrial bearing B05-AG-1019

Needle bearing 44,5x63,25 fits: JOHN DEERE 3950, 3955, 3970, 3975, 4050, 4055, 4250, 4255, 4450, 4455, 5200, 5400, 5440, 5460, 5720, 5730, 5820, 5830, 6610, 6710, 6810, 6910, 8440, 8450, 8640

View part

BTA Clutch release bearing B05-AG-102

Clutch thrust bearing (58x96x57,4) fits: JOHN DEERE 1020, 1030, 1040, 1040V, 1120, 1130, 1140, 1140E, 1140F, 1140V, 1350, 1530, 1550, 1640, 1640F, 1750, 1750V, 1840, 1840F, 1850, 1850F, 1850N

View part

BTA Industrial bearing B05-AG-1020

Needle bearing 22,22x28,58 fits: MASSEY FERGUSON 186, 187, 206, 240, 307, 400, 410, 415, 440, 487, 506, 507, 510, 520, 525

View part

BTA Industrial bearing B05-AG-1023

Needle bearing 23,8x30x15,8 fits: URSUS 4512, 4514, 5322, 5324 AHLMANN AVT1330 BOBCAT 963, 963G CASE IH 11, 80 C CLAAS 907T, 920, 925, 925 PLUS, 928, 928 PLUS, 940 GX, 960, 964, 964 PLUS

View part

BTA Industrial bearing B05-AG-1024

Needle bearing fits: MASSEY FERGUSON 265, 275, 290, 292, 297, 298, 425, 435, 440, 445, 460, 465, 475, 481, 492

View part

BTA Industrial bearing B05-AG-1027

Needle bearing 55,55x65,12x25,4 fits: URSUS 4512, 4514, 5312, 5314, 5714 MASSEY FERGUSON 565, 575, 590, 650, 675, 690, 698, 699

View part

BTA Industrial bearing B05-AG-1028

Needle bearing fits: MASSEY FERGUSON 342, 352, 362, 362 N, 365, 372 N, 375, 382 N, 390, 390 T, 396, 398, 399, 4215, 4220, 4225, 4235, 4245, 4255, 4260, 4270, 4325, 4335, 4345, 4355, 4360, 4365

View part

BTA Industrial bearing B05-AG-1030

Needle bearing fits: VALMET 505, 605, 615, 655, 665, 705, 715, 755, 805, 855 VALTRA 505, 605, 615, 655, 705, 715, 755, 805, 855

View part

BTA Multiple V-belt tensioning roll B05-AG-1032

Multiple V-belt tensioning roll fits: JOHN DEERE 9330, 9360 R, 9370 R, 9430, 9430 T, 9530, 9530 T, 9630, 9630 T, 660, 670, 760, 770

View part

BTA Wheel reduction gear repair kit B05-AG-1033

Wheel reduction gear repair kit fits: MASSEY FERGUSON 145, 152, 155, 158, 158 V, 165, 165 MK III, 168, 168 F, 175, 178, 185, 188, 1200, 1250, 260, 265, 270, 275, 285, 340, 350, 362, 375, 390

View part

BTA Driveshaft elements PTO B05-AG-1036

PTO Shaft elements (ring) fits: DEUTZ FAHR 5070 D, 5080 D, 5080 G, 5085 D, 5090 D, 5090 G, 5090.4 D, 5100, 5100 C, 5100 G, 5100 P, 5100.4 D, 5110, 5110 C, 5110 P, 5115.4 G, 5120, 5120 C

View part

BTA Axle shaft B05-AG-1037

Drive axle shaft fits: MASSEY FERGUSON 4235, 4240, 4260, 4270, 4345, 4355, 4360, 4365, 4370, 4435, 4445, 5425, 5460, 5470, 6235, 6245, 6255, 6260, 6265, 6270, 8110

View part

BTA Axle shaft B05-AG-1038

Drive axle shaft fits: JOHN DEERE 5-750, 5045D, 5045E, 5050E, 5065E 2WD, 5065E 4WD, 5065M, 5070M 2WD, 5070M 4WD, 5075E, 5075E 2WD, 5075E 4WD, 5075M, 5076E, 5076EL, 5078E, 5080M 2WD

View part

BTA Axle shaft B05-AG-1039

Drive axle shaft fits: JOHN DEERE 5045D, 5045E, 5050E, 5055D, 5058E, 5060 E, 5065E 2WD, 5065E 4WD, 5065M, 5067E, 5070M 2WD, 5070M 4WD, 5075E, 5075E 2WD, 5075E 4WD

View part

BTA Timing set (belt+pulley) B05-AG-104

Timing set (belt+ sprocket) fits: AHLMANN AL, AS, AZ ATLAS AR HOLDER A INGERSOLL RAND P LIEBHERR A, L VOLVO L BF4L1011-F4L2011

View part

BTA Axle shaft B05-AG-1040

Drive axle shaft fits: JOHN DEERE 6020, 6100 D, 6105D, 6110 D, 6115 D, 6120, 6120 L, 6130, 6130 D, 6140 D, 6215, 6220, 6220 L, 6225, 6230, 6320, 6320 L, 6325, 6330, 6415, 6420, 6420 L

View part

BTA Axle shaft B05-AG-1043

Drive axle shaft fits: JOHN DEERE 6130 D, 6140 D, 6230, 6230 2WD, 6230 4WD, 6320, 6330 2WD, 6330 4WD, 6430, 6430 2WD, 6430 4WD

View part

BTA Axle shaft B05-AG-1045

Drive axle shaft fits: MASSEY FERGUSON 4245, 4255, 4260, 4265, 4270, 4345, 4355, 4360, 4365, 4370, 5460, 6235, 6245, 6255, 6260, 6265, 6460, 6470

View part

BTA Axle shaft B05-AG-1049

Drive axle shaft fits: MASSEY FERGUSON 265 S, 275, 275 E, 285 S, 290, 375 E, 390, 390 E, 390 T, 396

View part

BTA Multi-V belt tensioner B05-AG-105

Multi-V belt tensioner fits: JOHN DEERE 100, 200, 300, 40, 40I, 400, 408R, 50, 50I, 500, 600, 614R, 615R, 620R, 6090M, 6090MC, 6090RC, 6095MC, 6095RC, 6100, 6100M, 6100MC, 6100RC, 6101, 6101A

View part

BTA Axle shaft B05-AG-1050

Drive axle shaft fits: JOHN DEERE 5045D, 5045E, 5060 E, 5065E 2WD, 5065E 4WD, 5070E, 5075E, 5075E 2WD, 5075E 4WD, 5080E, 5080R, 5082E, 5090E, 5090EH, 5090R, 5100R, 5103, 5105, 5203, 5203 S

View part

BTA Axle shaft main shaft B05-AG-1059

CV axle shaft fits: JOHN DEERE 5045E, 5060 E, 5080R, 5090R, 5100R, 5103, 5105, 5125R, 5203, 5203 S, 5205, 5220, 5225, 5303, 5320, 5325, 5403, 5415 2WD, 5415 4WD, 5420, 5425, 5503, 5520

View part

BTA Multi-V belt tensioner B05-AG-106

Multi-V belt tensioner fits: DEUTZ FAHR 100, 85, 108, 118, 120, 120 MK2, 120 MK3, 120 PROFILINE, 128, 130, 130 PROFILINE, 150, 150 MK2, 150 MK3, 150 PROFILINE, 150.7, 150.7 PROFILINE

View part

BTA Multi-V belt tensioner B05-AG-107

Multi-V belt tensioner fits: JCB 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC

View part

BTA Multi V-belt pulley B05-AG-108

Multi V-belt pulley fits: JCB 215, 217, 3CX, 3CX COMPACT, 3CX ECO CAB, 3CX HM, 3CX HMT, 3CX SITEMASTER, 3CX SM, 3CX SMT, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC, 412 S, 416

View part

BTA Multi V-belt pulley B05-AG-109

Multi V-belt pulley fits: JCB 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC, 524-50, 527-55, 535-140, 536-70, 540-140

View part

BTA Multi-V belt tensioner B05-AG-110

Multi-V belt tensioner fits: FENDT 819 FAVORIT SCR, 819 VARIO, 822 FAVORIT, 822 TURBO FAVORIT, 822 VARIO, 824 FAVORIT, 824 TURBO FAVORIT, 824 VARIO, 826 VARIO, 828 VARIO

View part

BTA Wheel reduction gear repair kit B05-AG-1103

Wheel reduction gear repair kit , JOHN DEERE 300, 310, 315, 320, 400, 420, 600, 620, 6020 SE, 6120, 6120 SE, 6210 SE, 6220, 6220 SE, 6320 SE, 6403, 6405, 6410, 6420 S, 6603

View part

Buying with Partios

Buying BTA parts through Partios

Are these genuine BTA parts?

Yes. Every BTA line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source BTA parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for BTA lines that aren't currently available.

Do you supply BTA parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on BTA parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a BTA order?

It depends on the line. Stocked BTA items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for BTA parts?

No. There's no minimum order value or quantity on a Partios trade account. Some BTA lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account