Partios Wholesale catalogue
Blue Print Distributor | Parts
Brake disc (1,879) · Brake pad set (1,417) · Clutch assy (1,292) · Air filter (1,226) · Wheel bearing kit (867) · Stabilizer link (695) · Flexible brake hoses (693) · Cabin filter (677) · 299 further part types (17,050)
26,117 current catalogue lines
About the BLUE PRINT range
The Blue Print range at Partios is broad rather than specialised. It has 26,117 lines spanning 307 part types across several vehicle systems. The largest groups are brake disc (1,879), brake pad set (1,417), clutch assy (1,292), air filter (1,226) and wheel bearing kit (867). They account for only 29% of the range, though. The other 18,420 lines sit across 301 further part types, which is what makes this a range to search rather than browse. That tail includes flexible brake hoses, cabin filter and wheel suspension track control arm, front. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 26,117 lines, is normally bought on fitment coverage rather than on any one part number.
Catalogue products
Vehicle references are indicative — confirm against the article number.
BLUE PRINT Front ball joint ADN186111
Axle ball joint L/R (bottom front) (cone diameter 24mm) fits: NISSAN INTERSTAR OPEL MOVANO A RENAULT MASTER II, MASTER PRO 1.9D-3.0D 12.97-
View partBLUE PRINT Front ball joint ADN186112
Axle ball joint L/R (top front) (With spring setting ring) fits: NISSAN CABSTAR, CABSTAR E 1.6-3.3D 01.82-12.13
View partBLUE PRINT Front ball joint ADN186113
Axle ball joint L/R (bottom front) (cone diameter 22mm, With spring setting ring) fits: NISSAN NAVARA, NAVARA NP300, NP300, PATHFINDER III 2.5D/3.0D/4.0 10.04-
View partBLUE PRINT Front ball joint ADN186114
Axle ball joint L/R (top front) (cone diameter 18mm, With spring setting ring) fits: NISSAN NAVARA NP300, PATHFINDER III 2.5D/3.0D/4.0 10.04-
View partBLUE PRINT Front ball joint ADN186115
Axle ball joint L/R (bottom front) (cone diameter 15,8 20mm, With spring setting ring) fits: NISSAN MURANO I, MURANO II, QASHQAI +2, QASHQAI I, QASHQAI II, QUEST, ROGUE, TEANA I 1.2-3.5 05.03-
View partBLUE PRINT Wheel suspension track control arm, front ADN186116
Front axle track control arm L bottom front 18 mm fits: NISSAN CUBE, MICRA III, NOTE, NV200, NV200 / EVALIA, TIIDA 1.2-1.8 01.03-
View partBLUE PRINT Wheel suspension track control arm, front ADN186117
Front axle track control arm R bottom front 18 mm fits: NISSAN CUBE, MICRA III, NOTE, NV200, NV200 / EVALIA, TIIDA 1.2-1.8 01.03-
View partBLUE PRINT Wheel suspension track control arm, front ADN186118
Front axle track control arm L bottom front fits: NISSAN KUBISTAR RENAULT CLIO II, KANGOO, KANGOO EXPRESS, THALIA I, THALIA II 1.0-Electric 08.97-
View partBLUE PRINT Wheel suspension track control arm, front ADN186119
Front axle track control arm L bottom front 20 mm (with bearing) fits: NISSAN QASHQAI +2, QASHQAI I, X-TRAIL, X-TRAIL II RENAULT KOLEOS I 1.5D-2.5 11.06-
View partBLUE PRINT Wheel suspension track control arm, front ADN186120
Front axle track control arm R bottom front 20 mm (with bearing) fits: NISSAN QASHQAI +2, QASHQAI I, ROGUE, X-TRAIL, X-TRAIL II RENAULT KOLEOS I, KOLEOS II 1.5D-2.5 11.06-
View partBLUE PRINT Wheel suspension track control arm, front ADN186121
Front axle track control arm L top front fits: NISSAN NAVARA NP300, PATHFINDER III 2.5D/3.0D/4.0 10.04-
View partBLUE PRINT Wheel suspension track control arm, front ADN186122
Front axle track control arm R top front fits: NISSAN NAVARA NP300, PATHFINDER III 2.5D/3.0D/4.0 10.04-
View partBLUE PRINT Front ball joint ADN186123
Axle ball joint L (bottom front) (cone diameter 23,1mm) fits: NISSAN INTERSTAR, NV400 OPEL MOVANO B RENAULT MASTER III 2.3D/Electric 02.10-
View partBLUE PRINT Wheel suspension track control arm, front ADN186124
Front axle track control arm L bottom front 22 mm fits: NISSAN NAVARA NP300, PATHFINDER III 2.5D/3.0D/4.0 10.04-
View partBLUE PRINT Wheel suspension track control arm, front ADN186125
Front axle track control arm R bottom front 22 mm fits: NISSAN NAVARA NP300, PATHFINDER III 2.5D/3.0D/4.0 10.04-
View partBLUE PRINT Front ball joint ADN186126
Axle ball joint L/R (top front) (cone diameter 16,1mm, With spring setting ring) fits: NISSAN NAVARA, PICK UP 2.4/2.5D/2.7D 02.98-
View partBLUE PRINT Front ball joint ADN186127
Axle ball joint L/R (bottom front) (cone diameter 21,8mm, With spring setting ring) fits: NISSAN PICK UP 2.5D 08.92-02.98
View partBLUE PRINT Front ball joint ADN186128
Axle ball joint L/R (bottom front) (cone diameter 16,8mm, With spring setting ring) fits: NISSAN MAXIMA / MAXIMA QX IV, MAXIMA III 2.0/3.0 10.88-12.00
View partBLUE PRINT Wheel suspension track control arm, front ADN186129
Front axle track control arm L bottom front fits: NISSAN JUKE, LEAF, PULSAR 1.2-Electric 06.10-
View partBLUE PRINT Wheel suspension track control arm, front ADN186130
Front axle track control arm R bottom front 18 mm fits: NISSAN JUKE, LEAF, PULSAR 1.2-Electric 06.10-
View partBLUE PRINT Wheel suspension track control arm, front ADN186131
Front axle track control arm L bottom front 18 mm fits: NISSAN CUBE, MICRA III, NOTE, NV200, NV200 / EVALIA, TIIDA 1.2-1.8 01.03-
View partBLUE PRINT Wheel suspension track control arm, front ADN186132
Front axle track control arm R bottom front 18 mm fits: NISSAN CUBE, MICRA III, NOTE, NV200, NV200 / EVALIA, TIIDA 1.2-1.8 01.03-
View partBLUE PRINT Front ball joint ADN186133
Axle ball joint L/R (bottom front) (cone diameter 19,7mm, with extra materials) fits: NISSAN CABSTAR, CABSTAR E 2.3D-3.0D 10.98-12.13
View partBLUE PRINT Wheel suspension track control arm, front ADN186137
Front axle track control arm R bottom front fits: NISSAN ALMERA TINO 1.8/2.0/2.2D 08.00-02.06
View partBLUE PRINT Wheel suspension track control arm, front ADN186138
Front axle track control arm L bottom front fits: NISSAN MURANO I 3.5 08.03-09.08
View partBLUE PRINT Wheel suspension track control arm, front ADN186139
Front axle track control arm R bottom front fits: NISSAN MURANO I 3.5 08.03-09.08
View partBLUE PRINT Wheel suspension track control arm, rear ADN186140
Rear axle track control arm L (bottom, rear, transverse, with bearing) fits: NISSAN PATHFINDER III 2.5D/3.0D/4.0 01.05-
View partBLUE PRINT Wheel suspension track control arm, rear ADN186141
Rear axle track control arm R (bottom, rear, transverse, with bearing) fits: NISSAN PATHFINDER III 2.5D/3.0D/4.0 01.05-
View partBLUE PRINT Wheel suspension track control arm, front ADN186142
Front axle track control arm L/R bottom front 19,8/22,2 mm (with bearing) fits: NISSAN NAVARA, NP300, PICK UP 2.4-3.2D 02.97-
View partBLUE PRINT Wheel suspension track control arm, front ADN186143
Front axle track control arm R bottom front fits: NISSAN NAVARA, NP300, PICK UP 2.4-3.2D 02.97-
View partBLUE PRINT Wheel suspension track control arm, front ADN186146
Front axle track control arm L top front fits: NISSAN NAVARA, NP300, PICK UP 2.5D 05.98-
View partBLUE PRINT Wheel suspension track control arm, front ADN186149
Front axle track control arm L top front 16/18,5 mm fits: NISSAN NAVARA, PICK UP 2.5D 02.98-
View partBLUE PRINT Wheel suspension track control arm, front ADN186150
Front axle track control arm R top front 16/18,5 mm (with bearing) fits: NISSAN NAVARA, PICK UP 2.5D 02.98-
View partBLUE PRINT Wheel suspension track control arm, front ADN186151
Front axle track control arm R top front 18,5 mm fits: NISSAN NAVARA, NP300, PICK UP 2.5D 05.98-
View partBLUE PRINT Wheel suspension track control arm, front ADN186152
Front axle track control arm L bottom front 16 mm fits: NISSAN ALMERA, MICRA IV, NOTE, VERSA II 1.2-1.6ALK 05.10-
View partBLUE PRINT Wheel suspension track control arm, front ADN186153
Front axle track control arm R bottom front 16 mm fits: NISSAN ALMERA, MICRA IV, NOTE, VERSA II 1.2-1.6ALK 05.10-
View partBLUE PRINT Wheel suspension track control arm, rear ADN186155
Rear axle track control arm L (bottom, rear, transverse) fits: NISSAN QASHQAI +2, QASHQAI I, QASHQAI II, ROGUE, X-TRAIL, X-TRAIL II, X-TRAIL III RENAULT KADJAR 1.2-2.5 11.06-
View partBLUE PRINT Wheel suspension track control arm, rear ADN186156
Rear axle track control arm R (bottom, rear, transverse) fits: NISSAN QASHQAI +2, QASHQAI I, QASHQAI II, ROGUE, X-TRAIL, X-TRAIL II, X-TRAIL III RENAULT KADJAR, KOLEOS II 1.2-2.5 11.06-
View partBLUE PRINT Wheel suspension track control arm, rear ADN186157
Rear axle track control arm L (top, rear, longitudinal) fits: NISSAN QASHQAI +2, QASHQAI I, QASHQAI II, ROGUE, X-TRAIL, X-TRAIL II, X-TRAIL III RENAULT KADJAR, KOLEOS I, KOLEOS II 1.2-2.5 11.06-
View partBLUE PRINT Wheel suspension track control arm, rear ADN186158
Rear axle track control arm R (top, rear, transverse) fits: NISSAN QASHQAI +2, QASHQAI I, QASHQAI II, ROGUE, X-TRAIL, X-TRAIL II, X-TRAIL III RENAULT KADJAR, KOLEOS I, KOLEOS II 1.2-2.5 11.06-
View partBLUE PRINT Front ball joint ADN186164
Axle ball joint L/R (front) (cone diameter 13mm, With spring setting ring) fits: NISSAN MICRA C+C III, MICRA II, MICRA III, NOTE 1.0-1.6 08.92-08.13
View partBLUE PRINT Front ball joint ADN18627
Axle ball joint L/R (bottom front) (cone diameter 19,6mm, with bolts) fits: AUDI TT FORD MAVERICK NISSAN PATHFINDER I, PICK UP, TERRANO I, TERRANO II 1.8-3.0 03.86-06.06
View partBLUE PRINT Front ball joint ADN18630
Axle ball joint L/R (bottom front) (cone diameter 14,5mm, With spring setting ring) fits: MITSUBISHI PAJERO III NISSAN 100NX, ALMERA I, PRIMERA, SUNNY III 1.4-3.2D 03.90-12.06
View partBLUE PRINT Front ball joint ADN18631
Axle ball joint L/R (bottom front) (cone diameter 18mm, With spring setting ring) fits: NISSAN PRIMERA, SUNNY II, X-TRAIL I 1.3-2.5 01.86-01.13
View partBLUE PRINT Front ball joint ADN18638
Axle ball joint L/R (bottom front) (cone diameter 19,6mm, with bolts with pads) fits: FORD MAVERICK NISSAN TERRANO II 2.4/2.7D/3.0D 02.93-09.07
View partBLUE PRINT Wheel suspension track control arm, front ADN18639
Front axle track control arm R top front fits: NISSAN PRIMERA 1.6-2.0LPG 06.90-07.02
View partBLUE PRINT Wheel suspension track control arm, front ADN18640
Front axle track control arm L top front fits: NISSAN PRIMERA 1.6-2.0LPG 06.90-07.02
View partBLUE PRINT Wheel suspension track control arm, front ADN18641
Front axle track control arm R bottom front fits: NISSAN NAVARA, NP300, PICK UP 2.5D/2.7D 02.98-
View partBuying with Partios
Buying BLUE PRINT parts through Partios
Are these genuine BLUE PRINT parts?
- Yes. Every BLUE PRINT line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source BLUE PRINT parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for BLUE PRINT lines that aren't currently available.
Do you supply BLUE PRINT parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on BLUE PRINT parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a BLUE PRINT order?
- It depends on the line. Stocked BLUE PRINT items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for BLUE PRINT parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some BLUE PRINT lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account