Partios Wholesale catalogue

Blue Print Distributor | Parts

Brake disc (1,879) · Brake pad set (1,417) · Clutch assy (1,292) · Air filter (1,226) · Wheel bearing kit (867) · Stabilizer link (695) · Flexible brake hoses (693) · Cabin filter (677) · 299 further part types (17,050)

26,117 current catalogue lines

About the BLUE PRINT range

The Blue Print range at Partios is broad rather than specialised. It has 26,117 lines spanning 307 part types across several vehicle systems. The largest groups are brake disc (1,879), brake pad set (1,417), clutch assy (1,292), air filter (1,226) and wheel bearing kit (867). They account for only 29% of the range, though. The other 18,420 lines sit across 301 further part types, which is what makes this a range to search rather than browse. That tail includes flexible brake hoses, cabin filter and wheel suspension track control arm, front. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 26,117 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

BLUE PRINT Wheel suspension track control arm, front ADC48646

Front axle track control arm R bottom front fits: MITSUBISHI ECLIPSE II, GALANT VII, GALANT VIII 1.8-2.5 11.92-10.04

View part

BLUE PRINT Wheel suspension track control arm, front ADC48647

Front axle track control arm L bottom front fits: MITSUBISHI COLT V, LANCER VI 1.3/1.6 12.95-09.03

View part

BLUE PRINT Wheel suspension track control arm, front ADC48648

Front axle track control arm R front fits: MITSUBISHI COLT V, LANCER VI 1.3/1.6 12.95-08.03

View part

BLUE PRINT Front ball joint ADC48651

Axle ball joint L (bottom front) fits: MITSUBISHI L 300 III, L400 2.0/2.4/2.5D 08.86-02.06

View part

BLUE PRINT Front ball joint ADC48652

Axle ball joint R (bottom front) fits: MITSUBISHI L 300 III, L400 2.0/2.4/2.5D 08.86-02.06

View part

BLUE PRINT Wheel suspension track control arm, front ADC48653

Front axle track control arm L bottom front 15/17 mm fits: VOLVO S40 I, V40 MITSUBISHI CARISMA 1.6-2.0 07.95-06.06

View part

BLUE PRINT Wheel suspension track control arm, front ADC48654

Front axle track control arm R bottom/transverse front 15 mm (with a joint (knuckle) with bearing with connector) fits: VOLVO S40 I, V40 MITSUBISHI CARISMA 1.6-2.0 07.95-06.06

View part

BLUE PRINT Front ball joint ADC48655

Axle ball joint L/R (bottom front) (cone diameter 22mm) fits: MITSUBISHI DELICA / SPACE GEAR, L 300 III, L400 2.0/2.5D 11.94-06.05

View part

BLUE PRINT Wheel suspension track control arm, front ADC48658

Front axle track control arm R top front fits: MITSUBISHI L200, PAJERO II, PAJERO SPORT I, PROUDIA/DIGNITY NISSAN PRIMERA 2.0-4.5 12.90-

View part

BLUE PRINT Wheel suspension track control arm, front ADC48659

Front axle track control arm L bottom front fits: MITSUBISHI CARISMA, SPACE STAR 1.3-1.9D 05.95-06.06

View part

BLUE PRINT Wheel suspension track control arm, front ADC48660

Front axle track control arm R bottom front fits: MITSUBISHI CARISMA, SPACE STAR 1.3-1.9D 05.95-06.06

View part

BLUE PRINT Wheel suspension track control arm, front ADC48661

Front axle track control arm L bottom front fits: MITSUBISHI PAJERO PININ I 1.8/2.0 10.99-06.07

View part

BLUE PRINT Wheel suspension track control arm, front ADC48662

Front axle track control arm R bottom front fits: MITSUBISHI PAJERO PININ I 1.8/2.0 10.99-06.07

View part

BLUE PRINT Wheel suspension track control arm, front ADC48665

Front axle track control arm L bottom front fits: MITSUBISHI PAJERO PININ I 1.8/2.0 10.99-06.07

View part

BLUE PRINT Wheel suspension track control arm, front ADC48666

Front axle track control arm R bottom front fits: MITSUBISHI PAJERO PININ I 1.8/2.0 10.99-06.07

View part

BLUE PRINT Front ball joint ADC48667

Axle ball joint L/R (top front) (cone diameter 16mm, with bolts) fits: MITSUBISHI L200, L200 / TRITON, PAJERO CLASSIC, PAJERO II, PAJERO III, PAJERO IV, PAJERO SPORT II 2.5D-3.8 04.00-

View part

BLUE PRINT Wheel suspension track control arm, rear ADC48668

Rear axle track control arm R (bottom, rear, transverse) fits: MITSUBISHI COLT IV, COLT V, LANCER IV, LANCER V, LANCER VI 1.3-2.0D 07.91-08.04

View part

BLUE PRINT Wheel suspension track control arm, rear ADC48669

Rear axle track control arm L (bottom, rear, transverse) fits: MITSUBISHI COLT IV, COLT V, LANCER IV, LANCER V, LANCER VI 1.3-2.0D 07.91-08.04

View part

BLUE PRINT Front ball joint ADC48670

Axle ball joint L/R (bottom front) (cone diameter 21,5mm) fits: FIAT FULLBACK MITSUBISHI L200, L200 / TRITON, PAJERO CLASSIC, PAJERO II, PAJERO III, PAJERO IV, PAJERO PININ I 1.8-3.8 10.99-

View part

BLUE PRINT Ball joint, rear ADC48671

Ball joint, rear L/R (top rear) (22,5mm) fits: MITSUBISHI PAJERO CLASSIC, PAJERO II, PAJERO III 2.5D-3.5 04.00-

View part

BLUE PRINT Wheel suspension track control arm, front ADC48672

Front axle track control arm R top front 18 mm (with a joint (knuckle) with bearing) fits: MITSUBISHI PAJERO CLASSIC, PAJERO II, PAJERO III, PAJERO IV 2.5D-3.8 04.00-

View part

BLUE PRINT Wheel suspension track control arm, front ADC48673

Front axle track control arm L top front 18 mm (with a joint (knuckle) with bearing) fits: MITSUBISHI PAJERO CLASSIC, PAJERO II, PAJERO III, PAJERO IV 2.5D-3.8 04.00-

View part

BLUE PRINT Front ball joint ADC48679

Axle ball joint L/R (bottom front) (With spring setting ring) fits: CITROEN C4 AIRCROSS, C-CROSSER, C-CROSSER ENTERPRISE DODGE CALIBER JEEP COMPASS MITSUBISHI ASX, LANCER CARGO 1.3-3.0 09.03-

View part

BLUE PRINT Wheel suspension track control arm, rear ADC48682C

Rear axle track control arm R (bottom, rear) fits: MITSUBISHI CARISMA 1.8 07.95-09.97

View part

BLUE PRINT Wheel suspension track control arm, rear ADC48683

Rear axle track control arm L/R (rear, transverse) fits: MITSUBISHI PAJERO CLASSIC, PAJERO II, PAJERO III, PAJERO IV 2.5D-3.8 04.00-

View part

BLUE PRINT Ball joint, rear ADC48689

Ball joint, rear L/R (top rear) fits: MITSUBISHI PAJERO II, PAJERO III, PAJERO IV 2.5D-3.8 04.00-

View part

BLUE PRINT Wheel suspension track control arm, front ADC48690

Front axle track control arm R bottom/transverse front (with bearing) fits: MITSUBISHI OUTLANDER I 2.0/2.4 03.01-09.07

View part

BLUE PRINT Wheel suspension track control arm, front ADC48691

Front axle track control arm L bottom/transverse front (with bearing) fits: MITSUBISHI OUTLANDER I 2.0/2.4 03.01-09.07

View part

BLUE PRINT Wheel suspension track control arm, front ADC48694

Front axle track control arm R front fits: MITSUBISHI LANCER CARGO, LANCER VII, OUTLANDER I 1.3/1.6/2.0 06.00-12.13

View part

BLUE PRINT Wheel suspension track control arm, front ADC48695

Front axle track control arm L front fits: MITSUBISHI LANCER CARGO, LANCER VII, OUTLANDER I 1.3/1.6/2.0 05.03-12.13

View part

BLUE PRINT Wheel suspension track control arm, front ADC48696

Front axle track control arm L top front fits: MITSUBISHI L200, PAJERO II, PAJERO SPORT I, PROUDIA/DIGNITY NISSAN PRIMERA 2.0-4.5 12.90-

View part

BLUE PRINT Wheel suspension track control arm, front ADC48697C

Front axle track control arm L front fits: MITSUBISHI SPACE, SPACE RUNNER 1.8/2.0/2.0D 05.91-08.99

View part

BLUE PRINT Wheel suspension track control arm, front ADC48698C

Front axle track control arm R bottom front fits: MITSUBISHI SPACE, SPACE RUNNER 1.8/2.0/2.0D 05.91-08.99

View part

BLUE PRINT Wheel suspension track control arm, front ADC48699C

Front axle track control arm L bottom front fits: MITSUBISHI COLT V, LANCER VI 1.3/1.6 12.95-09.03

View part

BLUE PRINT Tie rod end ADC48702

Tie rod end L/R fits: MITSUBISHI ECLIPSE I, ECLIPSE II, GALANT IX, GALANT V, GALANT VI, GALANT VII, GALANT VIII, OUTLANDER I, PAJERO PININ I, SIGMA, SPACE, SPACE RUNNER 1.6-3.8 01.84-

View part

BLUE PRINT Tie rod end ADC48703

Tie rod end L/R fits: VOLVO S40 I, V40 MITSUBISHI CARISMA, COLT II, COLT III, COLT IV, COLT V, I, LANCER CARGO, LANCER III, LANCER IV, LANCER V, LANCER VI, LANCER VII 0.7-Electric 10.83-05.20

View part

BLUE PRINT Tie rod end ADC48704

Tie rod end L/R fits: HYUNDAI GALLOPER II MITSUBISHI L200, PAJERO I 2.0-3.0 12.82-12.07

View part

BLUE PRINT Tie rod end ADC48705

Tie rod end L/R fits: MITSUBISHI L200, PAJERO I, PAJERO SPORT I NISSAN PRIMERA 2.0-3.0 12.82-

View part

BLUE PRINT Tie rod end ADC48706

Tie rod end L/R fits: MITSUBISHI L200 2.5D 11.86-10.96

View part

BLUE PRINT Tie rod end ADC48708

Tie rod end L/R fits: MITSUBISHI L200 2.5D 11.86-10.96

View part

BLUE PRINT Tie rod (with no end) ADC487100

Tie rod (with no end) L/R (length: 338mm) fits: MITSUBISHI ASX, ECLIPSE CROSS, LANCER VIII, OUTLANDER III 1.5-3.0 02.08-

View part

BLUE PRINT Tie rod (with no end) ADC487101

Tie rod (with no end) L (length: 282mm) fits: MITSUBISHI SPACE RUNNER 2.0/2.4 08.99-01.03

View part

BLUE PRINT Tie rod (with no end) ADC487102

Tie rod (with no end) R (length: 282mm) fits: MITSUBISHI SPACE RUNNER 2.0/2.4 08.99-01.03

View part

BLUE PRINT Tie rod (with no end) ADC487103

Tie rod (with no end) L (length: 320mm) fits: MITSUBISHI SPACE 2.0/2.4 10.98-12.04

View part

BLUE PRINT Tie rod (with no end) ADC487104

Tie rod (with no end) R (length: 320mm) fits: MITSUBISHI SPACE 2.0/2.4 10.98-12.04

View part

BLUE PRINT Tie rod (with no end) ADC487105

Tie rod (with no end) L/R (length: 308mm) fits: MITSUBISHI L200 / TRITON 2.5D 01.08-12.15

View part

BLUE PRINT Tie rod end ADC48713

Tie rod end L/R fits: MITSUBISHI L 300 / DELICA II, L 300 III 1.6-2.5D 05.80-02.06

View part

BLUE PRINT Tie rod end ADC48714

Tie rod end L/R fits: HYUNDAI H-1, H-1 / STAREX, H100 MITSUBISHI 3000 GT, GTO, L 300 / DELICA II, L 300 III, L400 1.6-3.0 08.86-12.07

View part

Buying with Partios

Buying BLUE PRINT parts through Partios

Are these genuine BLUE PRINT parts?

Yes. Every BLUE PRINT line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source BLUE PRINT parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for BLUE PRINT lines that aren't currently available.

Do you supply BLUE PRINT parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on BLUE PRINT parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a BLUE PRINT order?

It depends on the line. Stocked BLUE PRINT items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for BLUE PRINT parts?

No. There's no minimum order value or quantity on a Partios trade account. Some BLUE PRINT lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account