Partios Wholesale catalogue

Aisin Distributor | Transmission & Driveline

Clutch assy (1,137) · Water pump (795) · Clutch disc (517) · Clutch cover (448) · Timing set (belt+ pulley+ water pump) (421) · Clutch master cylinder (322) · Brake master cylinder (292) · Clutch servo (254) · 44 further part types (1,913)

6,097 current catalogue lines

About the AISIN range

Aisin is a transmission & driveline brand, and the range Partios carries reaches across 52 part types. The largest groups are clutch assy (1,137), water pump (795), clutch disc (517), clutch cover (448) and timing set (belt+ pulley+ water pump) (421). Beyond those, 2,459 lines are spread across 46 further part types. That tail includes brake master cylinder, clutch servo and multi-V-belt. Buyers are typically transmission specialists, workshops and motor factors; driveline work is high-value and usually planned, so buyers tend to source the whole job at once. With 6,097 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

AISIN Timing belt tensioner BTY-902

Timing belt tensioner fits: HYUNDAI COUPE II, SANTA FÉ I, SANTA FÉ II, SONATA IV, TIBURON, TRAJET, TUCSON, XG KIA MAGENTIS I, SPORTAGE II 2.5/2.7 06.98-11.10

View part

AISIN Clutch release bearing BY-002

Clutch thrust bearing fits: HYUNDAI ACCENT, ACCENT I, ACCENT II, COUPE I, COUPE II, ELANTRA III, GETZ, LANTRA II, MATRIX 1.1-1.9D 10.94-12.10

View part

AISIN Clutch release bearing BY-003

Clutch thrust bearing fits: HYUNDAI ACCENT II, COUPE I, COUPE II, ELANTRA III, GETZ, HIGHWAY, LANTRA II, MATRIX, SANTA FÉ I, SANTA FÉ II, SONATA IV, TIBURON, TRAJET 1.5D-3.0 11.95-12.12

View part

AISIN Clutch release bearing BY-004

Clutch thrust bearing fits: HYUNDAI ATOS, I10 I, I10 II, I10 III, I20 I, I20 II KIA PICANTO I, PICANTO II, PICANTO III, RIO III, RIO IV, STONIC 1.0-1.2LPG 02.98-

View part

AISIN Clutch release bearing BY-005

Clutch thrust bearing fits: HYUNDAI GALLOPER II, TERRACAN 2.5D 08.98-12.06

View part

AISIN Clutch release bearing BY-008

Clutch thrust bearing fits: HYUNDAI H-1, H-1 / STAREX, H-1 CARGO, H-1 TRAVEL, H100, TERRACAN KIA BONGO, K2500, K2900, PREGIO, SORENTO I 2.4-3.5 08.95-

View part

AISIN Clutch release bearing BY-009

Clutch thrust bearing fits: HYUNDAI IX35, TUCSON KIA CARENS III, MAGENTIS II, SPORTAGE II, SPORTAGE III 2.0-2.7 06.04-12.15

View part

AISIN Clutch release bearing BY-013

Clutch thrust bearing fits: HYUNDAI ACCENT III, ACCENT IV, ACCENT V, CRETA, ELANTRA IV, ELANTRA V, ELANTRA VI, GETZ, I20 ACTIVE, I20 I, I20 II, I30, I40 I, I40 I CW, IX20, IX35 1.0-2.0LPG 04.04-

View part

AISIN Clutch release bearing BY-014

Clutch thrust bearing (31,93mmx61,45mmx21,62mm) fits: HYUNDAI I10 I KIA PICANTO I 10.05-12.11

View part

AISIN Clutch release bearing BZ-002

Clutch thrust bearing fits: FORD FIESTA, FIESTA FURGON/NADWOZIE WIELKOPRZESTRZENNE, FIESTA IV, KA, PUMA MAZDA 121 III 1.25-1.8D 08.95-11.08

View part

AISIN Clutch release bearing BZ-004

AISIN CLUTCH BEARING MAZDA impressions

View part

AISIN Clutch release bearing BZ-005

Clutch thrust bearing fits: MAZDA RX-7 III 1.3 07.92-08.02

View part

AISIN Clutch release bearing BZ-006

Clutch thrust bearing fits: FORD ESCORT CLASSIC, ESCORT V, ESCORT VI, FIESTA, FIESTA FURGON/NADWOZIE WIELKOPRZESTRZENNE, FIESTA I, FIESTA II, FIESTA III, MONDEO I, ORION III 1.1-2.0 05.76-08.03

View part

AISIN Clutch release bearing BZ-015

Clutch thrust bearing fits: MAZDA E 1.6 05.78-06.84

View part

AISIN Clutch release bearing BZ-025

Clutch thrust bearing fits: MAZDA 323 II, 323 III 1.1-1.7D 11.80-08.93

View part

AISIN Clutch release bearing BZ-054

Clutch thrust bearing fits: FORD ECONOVAN KIA CARNIVAL I, CERATO, SPORTAGE MAZDA 323 C IV, 323 F IV, 323 F V, 323 F VI, 323 III, 323 S IV, 323 S VI, 5, 6, 626 I, 626 II, 626 III 1.0-3.0D 03.79-

View part

AISIN Clutch release bearing BZ-056

Clutch thrust bearing fits: FORD RANGER KIA CARENS I MAZDA 323 C IV, 323 C V, 323 F IV, 323 F V, 323 F VI, 323 S IV, 323 S V, 323 S VI, 5, 6, 626 II, 626 III, 626 IV, 626 V 1.3-3.0D 11.82-

View part

AISIN Clutch release bearing BZ-076

Clutch thrust bearing fits: MAZDA 323 III 1.1-1.7D 08.85-10.95

View part

AISIN Clutch release bearing BZ-107

Clutch thrust bearing fits: MAZDA MX-5 I, MX-5 II 1.6/1.8 05.90-10.05

View part

AISIN Clutch release bearing BZ-108

Clutch thrust bearing fits: KIA PRIDE, SEPHIA, SHUMA MAZDA 121 I, 121 II, 2, 3, 323 C IV, 323 C V, 323 F IV, 323 F V, 323 F VI, 323 III, 323 P V, 323 S IV, 323 S V, 323 S VI, 6 1.1-2.3 09.86-

View part

AISIN Clutch release bearing BZ-110

Clutch thrust bearing fits: MAZDA 3, 6, CX-5 04.12-

View part

AISIN Clutch cover C61023A

Clutch cover fits: TOYOTA LAND CRUISER 3.6D 01.75-07.80

View part

AISIN Clutch cover CA-001

Clamp coupling CHRYSLER

View part

AISIN Clutch cover CD-005

Clamp coupling DAIHATSU CUORE I (L55, L60) - 0.6 (L60)

View part

AISIN Clutch cover CD-007

Clamp coupling DAIHATSU CUORE III (L201) - 0.8 90-94

View part

AISIN Clutch cover CD-008

AISIN Clutch pressure DAIHATSU CHARADE 1.0 170mm 83 -

View part

AISIN Clutch cover CD-009

Clamp coupling DAIHATSU ROCKY Hard Top (F7, F8) - 2.8 D

View part

AISIN Clutch cover CD-011

Clamp coupling DAIHATSU MOVE (L6, L9) - 0.8 96 -

View part

AISIN Clutch cover CD-016

Clutch cover fits: DAIHATSU COPEN 0.7 09.03-09.12

View part

AISIN Clutch cover CD-017

Clutch cover (190mm) fits: DAIHATSU EXTOL, HIJET, TERIOS TOYOTA CAMI 1.3/1.3LPG 05.98-

View part

AISIN Clutch cover CD-501

Clamp coupling body DAIHATSU HIJET full (S85) - 1.0

View part

AISIN Clutch cover CD-901

Clamp coupling DAIHATSU APPLAUSE I (A101, A111) - 1.6 16V (A101)

View part

AISIN Clutch cover CD-902

Clamp coupling DAIHATSU CHARADE III (G100, G101, G102) - 1.3, (G102)

View part

AISIN Clutch cover CD-904

Clamp coupling Daihatsu Feroza Hard Top (F300) - 1.6 i 16V

View part

AISIN Clutch cover CD-906

Clamp coupling Daihatsu Terios (J1) - 1.3 4WD 97 -

View part

AISIN Clutch cover CD-908

Clamp AISIN CLUTCH DAIHATSU MOVE, CUORE L701 1.0i 98 -

View part

AISIN Clutch cover CD-910

Clamp coupling body DAIHATSU HIJET full (S85) - 1.2 D 95 -

View part

AISIN Clutch cover CD-911

Clamp coupling DAIHATSU SIRION (M1) - 1.3 Sport 00 -

View part

AISIN Clutch cover CD-914

Clutch cover (190mm) fits: DAIHATSU MATERIA, SIRION 1.5/1.5LPG 10.06-

View part

AISIN Clutch cover CDX-019A

Clutch cover fits: TOYOTA AVANZA, AVANZA II 1.3/1.5 09.06-07.15

View part

AISIN Clutch cover CE-CI02

Clamp coupling CITROEN

View part

AISIN Clutch cover CE-OP01

Clamp coupling ASCONA OPEL, KADETT

View part

AISIN Clutch cover CE-OP03

Clamp coupling ASCONA OPEL, KADETT

View part

AISIN Clutch cover CE-OP04

Clamp coupling OPEL ASCONA C

View part

AISIN Clutch cover CE-OP05

Clamp coupling OPEL ASCONA, KADET E

View part

AISIN Clutch cover CE-OP07

Clutch cover (201mm) fits: OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, CORSA A, CORSA A TR, CORSA B, CORSA C, CORSA D, KADETT E 1.0/1.5D/1.7D 06.87-08.14

View part

AISIN Clutch cover CE-SK02

Clamp coupling Skoda - FAVORIT (781) - 1.3 135 (781)

View part

AISIN Clutch cover CE-SK03

Clamp coupling SKODA - FELICIA I (6U1) - 1.3 94-98

View part

Buying with Partios

Buying AISIN parts through Partios

Are these genuine AISIN parts?

Yes. Every AISIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source AISIN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for AISIN lines that aren't currently available.

Do you supply AISIN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on AISIN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a AISIN order?

It depends on the line. Stocked AISIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for AISIN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some AISIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account