Partios Wholesale catalogue
Aisin Distributor | Transmission & Driveline
Clutch assy (1,137) · Water pump (795) · Clutch disc (517) · Clutch cover (448) · Timing set (belt+ pulley+ water pump) (421) · Clutch master cylinder (322) · Brake master cylinder (292) · Clutch servo (254) · 44 further part types (1,913)
6,097 current catalogue lines
About the AISIN range
Aisin is a transmission & driveline brand, and the range Partios carries reaches across 52 part types. The largest groups are clutch assy (1,137), water pump (795), clutch disc (517), clutch cover (448) and timing set (belt+ pulley+ water pump) (421). Beyond those, 2,459 lines are spread across 46 further part types. That tail includes brake master cylinder, clutch servo and multi-V-belt. Buyers are typically transmission specialists, workshops and motor factors; driveline work is high-value and usually planned, so buyers tend to source the whole job at once. With 6,097 lines on the catalogue, most common applications in this area are covered without needing a second source.
Catalogue products
Vehicle references are indicative — confirm against the article number.
AISIN Clutch release bearing BN-012
Thrust bearing
View partAISIN Clutch release bearing BN-013
Clutch thrust bearing fits: NISSAN CABSTAR E, TRADE 3.0D 01.94-11.06
View partAISIN Clutch release bearing BN-016
Clutch thrust bearing fits: NISSAN MICRA I, MICRA II 1.0/1.2 12.82-07.00
View partAISIN Clutch release bearing BN-033
AISIN Clutch Bearing NISSAN SUNNY D 1.0-1.6,1.7 82-86
View partAISIN Clutch release bearing BN-034
Impression Bearing NISSAN CHERRY Hatchback (N10) 08.1980 - 07.1981
View partAISIN Clutch release bearing BN-047
Clutch thrust bearing fits: NISSAN 200SX, 280ZX,ZXT, 300ZX, 350Z, BLUEBIRD, CABSTAR, LAUREL, NAVARA NP300, PATHFINDER I, PATROL GR V, PATROL III/1, PATROL III/2, PICK UP, SERENA 1.5-3.5 10.78-
View partAISIN Clutch release bearing BN-057
Thrust bearing
View partAISIN Clutch release bearing BN-063
CLUTCH THRUST BEARING NISSAN CHERRY 1.0 -86
View partAISIN Clutch release bearing BN-064
Clutch thrust bearing fits: NISSAN 100NX, ALMERA CLASSIC, ALMERA I, ALMERA II, ALMERA TINO, BLUEBIRD, MICRA II, PRAIRIE, PRIMERA, SUNNY II, SUNNY III 1.0-2.0LPG 07.83-
View partAISIN Clutch release bearing BN-065
Clutch thrust bearing fits: NISSAN ALMERA II, ALMERA TINO, MAXIMA / MAXIMA QX IV, MAXIMA / MAXIMA QX V, MAXIMA III, NAVARA, PICK UP, PRAIRIE PRO, SUNNY III, TERRANO I, URVAN 2.0-4.0D 08.87-
View partAISIN Clutch release bearing BN-067
Clutch thrust bearing fits: NISSAN CEFIRO III, MAXIMA / MAXIMA QX IV, MAXIMA / MAXIMA QX V, NAVARA, PICK UP, PRAIRIE PRO 2.0/2.4/2.5D 03.86-11.03
View partAISIN Clutch release bearing BN-068
Clutch thrust bearing fits: LDV CUB NISSAN CABSTAR E, SERENA, TRADE, VANETTE CARGO 2.0D/2.3D 06.91-10.06
View partAISIN Clutch release bearing BN-077
Clutch thrust bearing fits: NISSAN ALTIMA, BLUEBIRD, NAVARA, NAVARA NP300, NP300, PICK UP, PRAIRIE, PRAIRIE PRO, SUNNY II 1.6-2.5D 04.84-
View partAISIN Clutch release bearing BN-097
Clutch thrust bearing fits: NISSAN PATROL GR IV, PATROL III/2 2.8D-4.2D 05.86-02.98
View partAISIN Clutch release bearing BN-099
Clutch thrust bearing fits: NISSAN ALMERA I 1.4 09.95-07.00
View partAISIN Clutch release bearing BO-001
Clutch thrust bearing fits: CHEVROLET AVEO / KALOS, EPICA, EVANDA DAEWOO ARANOS, CIELO, ESPERO, EVANDA, KALOS, LANOS, LEGANZA, NEXIA, NUBIRA, TACUMA / REZZO OPEL ASCONA C, ASTRA F 1.2-2.5 09.84-
View partAISIN Clutch release bearing BO-003
Clutch thrust bearing fits: MERCEDES C T-MODEL (S202), C (W202), CLK (A208), CLK (C208), E T-MODEL (S210), E (W210), G (W460), SLK (R170) DAEWOO KORANDO, MUSSO SSANGYONG KORANDO 1.8-3.2 12.79-
View partAISIN Brake pad set BPLR-7007
Brake pads set front , fits: JAGUAR F-PACE, I-PACE, XE, XF II, XF SPORTBRAKE LAND ROVER RANGE ROVER VELAR 2.0-Electric 03.15-
View partAISIN Clutch release bearing BR-001
Clutch thrust bearing (38mmx68mmx49mm)
View partAISIN Clutch release bearing BR-083
Thrust bearing
View partAISIN Clutch release bearing BS-001
Clutch thrust bearing fits: DAIHATSU CUORE II SUBARU JUSTY I SUZUKI ALTO II 0.8/1.2 09.85-04.96
View partAISIN Clutch release bearing BS-002
Clutch thrust bearing fits: OPEL AGILA A SUBARU JUSTY III SUZUKI ALTO IV, BALENO, IGNIS I, IGNIS II, SWIFT, SWIFT II, SWIFT III, WAGON R, WAGON R+ 1.0-1.9D 03.89-
View partAISIN Clutch release bearing BS-003
Clutch thrust bearing fits: SUZUKI CARRY, JIMNY 1.3/1.5/1.5D 09.98-
View partAISIN Clutch release bearing BS-004
Clutch thrust bearing fits: SUZUKI GRAND VITARA I, JIMNY, VITARA 1.5D/2.0D 12.94-
View partAISIN Clutch release bearing BS-005
Clutch thrust bearing fits: SUZUKI GRAND VITARA I, GRAND VITARA II 1.6-2.7 03.98-02.15
View partAISIN Clutch release bearing BS-009A
Clutch thrust bearing fits: SUBARU JUSTY II SUZUKI BALENO, LIANA, SAMURAI, SJ410, SJ413, SUPER CARRY, SWIFT II, SWIFT III, VITARA, X-90 1.0-2.3 09.81-
View partAISIN Clutch release bearing BS-011
Clutch thrust bearing fits: SUZUKI ALTO II 0.8 01.86-12.88
View partAISIN Clutch release bearing BS-038
Clutch thrust bearing fits: ISUZU CAMPO, MIDI, TROOPER I ROVER 2000-3500 SUZUKI CARRY, LJ80, SAMURAI, SJ410, SUPER CARRY TOYOTA COROLLA 0.8-2.6 07.75-12.04
View partAISIN Clutch release bearing BS-044
Clutch thrust bearing fits: CHEVROLET AVEO / KALOS, MATIZ, SPARK DAEWOO KALOS, MATIZ, TICO NISSAN PIXO OPEL AGILA B SUZUKI ALTO VI, ALTO VII, BALENO, CELERIO, IGNIS III, SPLASH 0.8-1.4 10.83-
View partAISIN Clutch release bearing BT-002
Clutch thrust bearing fits: TOYOTA 4 RUNNER II, CARINA II, CARINA III, CELICA, CHASER, COROLLA, CORONA, CRESSIDA, CROWN, DYNA, DYNA 150, HIACE III, HILUX III, HILUX IV 1.3-2.8 07.77-04.95
View partAISIN Clutch release bearing BT-003
Clutch thrust bearing fits: TOYOTA LAND CRUISER 80 4.0 01.90-10.92
View partAISIN Clutch release bearing BT-006
Clutch thrust bearing fits: TOYOTA DYNA 200 3.0D-4.1D 01.85-12.02
View partAISIN Clutch release bearing BT-008
Clutch thrust bearing fits: TOYOTA 4 RUNNER III, LAND CRUISER 90, TUNDRA 3.4 11.95-07.04
View partAISIN Clutch release bearing BT-009
Clutch thrust bearing fits: TOYOTA LAND CRUISER 80 4.2D 01.95-12.97
View partAISIN Clutch release bearing BT-011
TOYOTA CLUTCH THRUST BEARING
View partAISIN Clutch release bearing BT-012
Thrust bearing
View partAISIN Clutch release bearing BT-013
Clutch thrust bearing fits: TOYOTA 4 RUNNER II, 4 RUNNER III, DYNA, FORTUNER, HIACE IV, HIACE V, HILUX VI, LAND CRUISER, LAND CRUISER 90 2.5D/3.0D 05.93-
View partAISIN Clutch release bearing BT-014
Thrust bearing
View partAISIN Clutch release bearing BT-015
Clutch thrust bearing fits: TOYOTA LAND CRUISER 80 4.5 08.92-12.97
View partAISIN Clutch release bearing BT-016
Clutch thrust bearing fits: LEXUS IS I, IS SPORTCROSS, SC TOYOTA ALTEZZA GITA, CROWN, DYNA, HIACE IV, HILUX VI, HILUX VII 2.5D/3.0 01.95-
View partAISIN Clutch release bearing BT-019
BEARING CLUTCH AISIN TOYOTA CARINA II 1.8 / 2.0 84-92
View partAISIN Clutch release bearing BT-021
Clutch thrust bearing fits: TOYOTA COROLLA, PLATZ, VIOS / SOLUNA VIOS, YARIS 1.0-1.8 04.99-01.08
View partAISIN Clutch release bearing BT-022
Clutch thrust bearing fits: TOYOTA LAND CRUISER 3.4D/4.0D 10.85-12.89
View partAISIN Clutch release bearing BT-024
Clutch thrust bearing fits: TOYOTA DYNA 200 HINO 300 3.4D-4.1D 06.95-
View partAISIN Clutch release bearing BT-025
Clutch thrust bearing fits: SUZUKI VITARA 2.0 12.94-03.99
View partAISIN Clutch release bearing BT-026
Clutch thrust bearing fits: TOYOTA DYNA, LAND CRUISER 3.0D/3.4D 08.77-12.96
View partAISIN Clutch release bearing BT-027
Impression Bearing TOYOTA LAND CRUISER (_J4_) 04.1979 - 07.1980
View partAISIN Clutch release bearing BT-029
Clutch thrust bearing fits: TOYOTA LAND CRUISER, LAND CRUISER 100 4.2D 01.90-
View partBuying with Partios
Buying AISIN parts through Partios
Are these genuine AISIN parts?
- Yes. Every AISIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source AISIN parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for AISIN lines that aren't currently available.
Do you supply AISIN parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on AISIN parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a AISIN order?
- It depends on the line. Stocked AISIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for AISIN parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some AISIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account