Partios Wholesale catalogue

AISIN1 Distributor | Transmission & Driveline

Clutch assy (623) · Dual mass flywheel (411) · Clutch cover (64) · Clutch disc (52) · Timing set (belt+ pulley+ water pump) (11) · Brake master cylinder (6) · Brake caliper motor (2) · Pneumatic clutch bearing (2) · 3 further part types (3)

1,166 current catalogue lines

About the AISIN1 range

AISIN1 covers transmission & driveline at Partios. It has 1,166 lines across 11 part types, rather than depth in a single one. The largest groups are clutch assy (623), dual mass flywheel (411), clutch cover (64), clutch disc (52) and timing set (belt+ pulley+ water pump) (11). Those six account for most of the catalogue; the remaining 7 lines are spread across 5 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes brake caliper motor, pneumatic clutch bearing and synchromesh ring. Typical buyers are transmission specialists, workshops and motor factors, where driveline work is high-value and usually planned, so buyers tend to source the whole job at once. At 1,166 lines the range covers most common applications in this area.

Catalogue products

Vehicle references are indicative — confirm against the article number.

AISIN1 Clutch assy SCKE-RE12R

Clutch kit with dual mass flywheel and hydraulic bearing (240mm) fits: RENAULT GRAND SCENIC II, MEGANE II, SCENIC II 1.9D 08.03-

View part

AISIN1 Clutch assy SCKE-RE15R

Clutch kit with dual mass flywheel and hydraulic bearing fits: RENAULT ESPACE IV, LAGUNA II 1.9D 03.01-01.15

View part

AISIN1 Clutch assy SCKE-RE20R

Clutch kit (228mm) fits: MERCEDES CITAN MIXTO (DOUBLE CABIN), CITAN (W415), CITAN/NADWOZIE WIELKOPRZESTRZENNE (W415) DACIA DUSTER, LODGY NISSAN CUBE, JUKE, NOTE, NV200 1.5D 08.03-

View part

AISIN1 Clutch assy SCKE-RE92R

Clutch kit with dual mass flywheel and bearing fits: DACIA DUSTER RENAULT AUSTRAL, CAPTUR II, CLIO V, DUSTER, EXPRESS FURGON/NADWOZIE WIELKOPRZESTRZENNE, GRAND KANGOO III 1.2-1.5D 10.10-

View part

AISIN1 Clutch assy SCKE-VG02R

Clutch kit with dual mass flywheel and hydraulic bearing (240mm) fits: FORD GALAXY I SEAT ALHAMBRA VW SHARAN 1.9D 11.02-03.10

View part

AISIN1 Clutch assy SCKE-VG21R

Clutch kit with dual mass flywheel and hydraulic bearing (64mm)

View part

AISIN1 Clutch assy SCKE-VG23R

Clutch kit with dual mass flywheel and hydraulic bearing (240mm) fits: VW CALIFORNIA T5 CAMPER, MULTIVAN T5, TRANSPORTER T5 2.5D 04.03-11.09

View part

AISIN1 Clutch assy SCKE-VG25R

Dual-plate clutch kit with bearing (241mm) fits: VW TIGUAN 2.0D 09.07-07.18

View part

AISIN1 Clutch assy SCKE-VG89R

Clutch kit with dual mass flywheel and hydraulic bearing (240mm) fits: AUDI A3, TT SEAT ALHAMBRA, ALTEA, ALTEA XL, LEON SKODA YETI VW CADDY III 2.0D 05.03-12.22

View part

AISIN1 Clutch assy SCKE-VG92R

Clutch kit with dual mass flywheel and hydraulic bearing (240mm) fits: AUDI A3, TT SEAT ALHAMBRA, LEON, TOLEDO II VW BORA, GOLF IV, NEW BEETLE, SHARAN 1.8/1.9D 12.96-12.14

View part

AISIN1 Clutch assy SCKE-VW21R

Clutch kit (239mm) fits: AUDI A3, Q3, TT SEAT ALHAMBRA, ALTEA, ALTEA XL, LEON SKODA OCTAVIA II, SUPERB II, YETI VW CADDY ALLTRACK IV, CADDY III 2.0D 05.03-08.26

View part

AISIN1 Clutch assy SCKE-VW99R

Clutch kit with dual mass flywheel and hydraulic bearing (240mm) fits: AUDI A3, TT SEAT ALHAMBRA, ALTEA, ALTEA XL, LEON, TOLEDO III SKODA OCTAVIA II, SUPERB II, YETI 1.9D-2.5D 02.03-12.17

View part

AISIN1 Clutch assy SCKK-623R

Clutch kit with dual mass flywheel and hydraulic bearing fits: HYUNDAI I30, SONATA V, TUCSON KIA CARENS III, CEE'D, MAGENTIS II, SPORTAGE II 2.0D 08.04-03.13

View part

AISIN1 Clutch assy SCKM-110R

Clutch kit with dual mass flywheel and hydraulic bearing fits: MITSUBISHI GRANDIS, LANCER VIII 2.0D 09.05-

View part

AISIN1 Clutch assy SCKM-111R

Clutch kit with dual mass flywheel and hydraulic bearing fits: MITSUBISHI OUTLANDER II 2.0D 02.07-11.12

View part

AISIN1 Clutch assy SCKM-113R

Clutch kit with dual mass flywheel and hydraulic bearing fits: CITROEN C-CROSSER MITSUBISHI OUTLANDER II PEUGEOT 4007 2.2D 11.06-03.13

View part

AISIN1 Clutch assy SCKM-117R

Clutch kit with dual mass flywheel and hydraulic bearing (240mm) fits: MITSUBISHI ASX, LANCER VIII, OUTLANDER II, OUTLANDER III 1.8D/2.2D 11.06-

View part

AISIN1 Clutch assy SCKM-910R

Clutch kit with dual mass flywheel and hydraulic bearing fits: MITSUBISHI GRANDIS, LANCER VIII 2.0D 09.05-

View part

AISIN1 Clutch assy SCKN-223R

Clutch kit with dual mass flywheel and hydraulic bearing fits: NISSAN QASHQAI I, X-TRAIL, X-TRAIL II RENAULT KOLEOS I, LAGUNA III 2.0D 02.07-

View part

AISIN1 Clutch assy SCKN-224R

Clutch kit with dual mass flywheel and hydraulic bearing (250mm) fits: NISSAN NV400 OPEL MOVANO B RENAULT MASTER III 2.3D 02.10-

View part

AISIN1 Clutch assy SCKN-228R

Clutch kit with dual mass flywheel and hydraulic bearing fits: NISSAN QASHQAI I, X-TRAIL II 2.0 02.07-04.14

View part

AISIN1 Clutch assy SCKN-229R

Clutch kit with dual mass flywheel and hydraulic bearing (225mm) fits: NISSAN TIIDA, X-TRAIL II 1.8/2.0 09.04-11.13

View part

AISIN1 Clutch assy SCKN-901R

Clutch kit with dual mass flywheel and hydraulic bearing fits: NISSAN PRIMERA RENAULT GRAND SCENIC II, MEGANE II, SCENIC II 1.9D/2.0 08.02-

View part

AISIN1 Clutch assy SCKN-923R

Clutch kit with dual mass flywheel and hydraulic bearing fits: RENAULT ESPACE IV, GRAND SCENIC II, LAGUNA II, LAGUNA III, LATITUDE, MEGANE II, SCENIC II 2.0D 08.05-

View part

AISIN1 Clutch assy SCKO-031R

Clutch kit with dual mass flywheel and hydraulic bearing fits: CHEVROLET CAPTIVA, EPICA, LACETTI, NUBIRA 2.0D 10.06-

View part

AISIN1 Clutch assy SCKO-040R

Clutch kit with dual mass flywheel and hydraulic bearing fits: SSANGYONG ACTYON I, KYRON, RODIUS I 2.0D/2.7D 05.05-

View part

AISIN1 Clutch assy SCKS-056R

Clutch kit with dual mass flywheel and hydraulic bearing fits: OPEL AGILA B SUZUKI SPLASH, SWIFT III, SWIFT IV 1.3D 08.05-

View part

AISIN1 Clutch assy SCKS-060R

Clutch kit with dual mass flywheel and hydraulic bearing fits: FIAT SEDICI SUZUKI SX4 2.0D 06.06-

View part

AISIN1 Clutch assy SCKT-375R

Clutch kit with dual mass flywheel and hydraulic bearing fits: TOYOTA URBAN CRUISER 1.4D 01.09-04.14

View part

AISIN1 Clutch assy SCKY-087R

Clutch kit with dual mass flywheel and hydraulic bearing fits: HYUNDAI SANTA FÉ II 2.2D 03.06-12.12

View part

AISIN1 Clutch assy SCKY-117R

Clutch kit with dual mass flywheel and hydraulic bearing fits: HYUNDAI IX35 KIA SPORTAGE III 2.0D 01.10-12.15

View part

AISIN1 Clutch assy SCKY-121R

Clutch kit with dual mass flywheel and hydraulic bearing (240mm) fits: HYUNDAI I40 I, I40 I CW KIA CARENS IV, OPTIMA 1.7D 07.11-05.19

View part

AISIN1 Clutch assy SCKZ-127R

Clutch kit with dual mass flywheel and hydraulic bearing (238mm) fits: FORD C-MAX II, FIESTA VII, FOCUS III, GRAND C-MAX, KUGA II, MONDEO III, MONDEO V 1.5D-2.0 10.00-

View part

AISIN1 Clutch assy SCWN-002R

Clutch kit with dual-mass flywheel (230mm) fits: MERCEDES CITAN MIXTO (DOUBLE CABIN), CITAN (W415), CITAN/NADWOZIE WIELKOPRZESTRZENNE (W415) DACIA DUSTER, LODGY NISSAN CUBE 1.5D/2.3D 08.03-

View part

AISIN1 Clutch assy SCWVW-090R

Clutch kit with dual mass flywheel and hydraulic bearing (with central clutch slave cylinder With clutch cover with clutch plate, 240mm) fits: FORD GALAXY I 1.9D 02.03-05.06

View part

AISIN1 Clutch assy SDKY-102

Clutch kit with dual mass flywheel and bearing (235mm) fits: HYUNDAI ACCENT IV, ELANTRA VI, I30, I40 I, I40 I CW, KONA, TUCSON KIA CARENS IV, CEE'D, CEED, CERATO III, OPTIMA 1.4-1.7D 11.10-

View part

AISIN1 Clutch assy SDKY-202

Clutch kit with dual mass flywheel and bearing fits: HYUNDAI KONA, TUCSON, VELOSTER KIA OPTIMA, SOUL II, SPORTAGE IV 1.6 10.12-05.23

View part

AISIN1 Clutch assy SDKY-302

Clutch kit with dual mass flywheel and bearing fits: HYUNDAI ACCENT IV, ELANTRA VI, I30, I40 I, I40 I CW, TUCSON KIA CARENS IV, CEE'D, OPTIMA, PRO CEE'D, SOUL II, SPORTAGE IV 1.6D/1.7D 04.11-

View part

AISIN1 Clutch assy SKE-BM02

Clutch kit with dual mass flywheel and bearing fits: BMW 3 (E46), 5 (E39) 2.0D 02.98-09.03

View part

AISIN1 Clutch assy SKE-BM06

Clutch kit with dual mass flywheel and bearing (with automatic setting with bolt kit with thrust bearing, 240mm) fits: BMW 5 (E60), 5 (E61), X3 (E83) 3.0D/4.0 09.02-08.10

View part

AISIN1 Clutch assy SKE-BM09

Clutch kit (240mm) fits: BMW 1 (E87), 3 (E46), 3 (E90), 3 (E91), 5 (E60), 5 (E61) 2.0D 09.01-06.12

View part

AISIN1 Clutch assy SKE-BM13

Clutch kit with dual mass flywheel and bearing (215mm) fits: BMW 3 (E30), 3 (E36), 5 (E34), Z3 (E36) 1.8/1.8CNG/1.9 09.89-08.99

View part

AISIN1 Clutch assy SKE-BM15

Clutch kit with dual mass flywheel and bearing (220mm) fits: MERCEDES CITAN (W415) MINI (R50, R53), (R52) 1.5D/1.6 03.02-08.21

View part

AISIN1 Clutch assy SKE-BM16

Clutch kit with dual mass flywheel and bearing (230mm) fits: BMW 3 (E36), 5 (E39) 2.5 05.95-08.00

View part

AISIN1 Clutch assy SKE-BM82

Clutch kit with dual mass flywheel and bearing (230mm) fits: BMW 3 (E46) 1.6/1.8/2.0 12.00-12.07

View part

AISIN1 Clutch assy SKE-BM92

Clutch kit with dual mass flywheel and bearing (230mm)

View part

AISIN1 Clutch assy SKE-BM94

Clutch kit with dual mass flywheel and bearing (228mm) fits: BMW 1 (F20), 1 (F21), 2 (F22, F87), 3 (F30, F80), 3 (F31), 3 GRAN TURISMO (F34), 4 GRAN COUPE (F36) 1.6D/2.0D 07.11-06.19

View part

AISIN1 Clutch assy SKE-BM96

Clutch kit with dual mass flywheel and bearing (230mm) fits: BMW 3 (E30), 3 (E36), 5 (E28), 5 (E34), 5 (E39) 2.4D/2.5D 09.83-06.03

View part

Buying with Partios

Buying AISIN1 parts through Partios

Are these genuine AISIN1 parts?

Yes. Every AISIN1 line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source AISIN1 parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for AISIN1 lines that aren't currently available.

Do you supply AISIN1 parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on AISIN1 parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a AISIN1 order?

It depends on the line. Stocked AISIN1 items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for AISIN1 parts?

No. There's no minimum order value or quantity on a Partios trade account. Some AISIN1 lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account